@@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain)
}
}
-static void
+static int
bcm2835_init_power_domain(struct bcm2835_power *power,
int pd_xlate_index, const char *name)
{
@@ -493,6 +493,17 @@ bcm2835_init_power_domain(struct bcm2835_power *power,
struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index];
dom->clk = devm_clk_get(dev->parent, name);
+ if (IS_ERR(dom->clk)) {
+ int ret = PTR_ERR(dom->clk);
+
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ /* Some domains don't have a clk, so make sure that we
+ * don't deref an error pointer later.
+ */
+ dom->clk = NULL;
+ }
dom->base.name = name;
dom->base.power_on = bcm2835_power_pd_power_on;
@@ -505,6 +516,8 @@ bcm2835_init_power_domain(struct bcm2835_power *power,
pm_genpd_init(&dom->base, NULL, true);
power->pd_xlate.domains[pd_xlate_index] = &dom->base;
+
+ return 0;
}
/** bcm2835_reset_reset - Resets a block that has a reset line in the
@@ -602,7 +615,7 @@ static int bcm2835_power_probe(struct platform_device *pdev)
{ BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 },
{ BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 },
};
- int ret, i;
+ int ret = 0, i;
u32 id;
power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
@@ -629,8 +642,11 @@ static int bcm2835_power_probe(struct platform_device *pdev)
power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names);
- for (i = 0; i < ARRAY_SIZE(power_domain_names); i++)
- bcm2835_init_power_domain(power, i, power_domain_names[i]);
+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
+ ret = bcm2835_init_power_domain(power, i, power_domain_names[i]);
+ if (ret)
+ goto fail;
+ }
for (i = 0; i < ARRAY_SIZE(domain_deps); i++) {
pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base,
@@ -644,12 +660,21 @@ static int bcm2835_power_probe(struct platform_device *pdev)
ret = devm_reset_controller_register(dev, &power->reset);
if (ret)
- return ret;
+ goto fail;
of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate);
dev_info(dev, "Broadcom BCM2835 power domains driver");
return 0;
+
+fail:
+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
+ struct generic_pm_domain *dom = &power->domains[i].base;
+
+ if (dom->name)
+ pm_genpd_remove(dom);
+ }
+ return ret;
}
static int bcm2835_power_remove(struct platform_device *pdev)
The clock driver may probe after ours and so we need to pass the -EPROBE_DEFER out. Fix the other error path while we're here. v2: Use dom->name instead of dom->gov as the flag for initialized domains, since we aren't setting up a governor. Make sure to clear ->clk when no clk is present in the DT. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") --- drivers/soc/bcm/bcm2835-power.c | 35 ++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-)