diff mbox series

[RFC,27/27] mtd: spinand: Propagate ECC information to the MTD structure

Message ID 20190221130205.29029-1-miquel.raynal@bootlin.com
State RFC
Headers show
Series None | expand

Commit Message

Miquel Raynal Feb. 21, 2019, 1:02 p.m. UTC
This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.

This fix depends on recent changes and should not be backported as-is.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 drivers/mtd/nand/spi/core.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series


diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 510a1201d6a7..15c82a51bc85 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -984,6 +984,10 @@  static int spinand_init(struct spinand_device *spinand)
 	mtd->oobavail = ret;
+	/* Propagate ECC information to mtd_info */
+	mtd->ecc_strength = nand->ecc.ctx.conf.strength;
+	mtd->ecc_step_size = nand->ecc.ctx.conf.step_size;
 	return 0;