| Message ID | 20190301164349.60589-1-christoph.muellner@theobroma-systems.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] dt-bindings: mmc: Add DTS property to disable DCMDs on Arasan controllers | expand |
Am Freitag, 1. März 2019, 17:43:45 CET schrieb Christoph Muellner: > Direct commands (DCMDs) are an optional feature of eMMC 5.1's command > queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI, > which exposes a control register bit to enable the feature. > The current implementation sets this bit unconditionally. > > This patch allows to surpress the feature activation, > by specifying the property disable-cqe-dcmd. > > Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Patch subject is needs improvement :-) . I did scratch my head a lot regarding "where is the code change" until I actually looked into the patch itself, so you probably want mmc: sdhci-of-arasan: Add DTS property to disable DCMDs or similar instead of "dt-bindings: ..." here to match the subsystem. Heiko > --- > drivers/mmc/host/sdhci-of-arasan.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > index c9e3e050ccc8..88dc3f00a5be 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device *pdev) > host->mmc_host_ops.start_signal_voltage_switch = > sdhci_arasan_voltage_switch; > sdhci_arasan->has_cqe = true; > - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; > + host->mmc->caps2 |= MMC_CAP2_CQE; > + > + if (!of_property_read_bool(np, "disable-cqe-dcmd")) > + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; > } > > ret = sdhci_arasan_add_host(sdhci_arasan); >
> On 01.03.2019, at 19:17, Heiko Stuebner <heiko@sntech.de> wrote: > > Am Freitag, 1. März 2019, 17:43:45 CET schrieb Christoph Muellner: >> Direct commands (DCMDs) are an optional feature of eMMC 5.1's command >> queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI, >> which exposes a control register bit to enable the feature. >> The current implementation sets this bit unconditionally. >> >> This patch allows to surpress the feature activation, >> by specifying the property disable-cqe-dcmd. >> >> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> >> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> > > Patch subject is needs improvement :-) . > I did scratch my head a lot regarding "where is the code change" > until I actually looked into the patch itself, so you probably want > > mmc: sdhci-of-arasan: Add DTS property to disable DCMDs > > or similar instead of "dt-bindings: ..." here to match the subsystem. Yes, I've spotted this as well after sending it. I've already renamed to "mmc: sdhci-of-arasan: Add DTS property to disable DCMDs." for v2. Thanks, Christoph > > > Heiko > >> --- >> drivers/mmc/host/sdhci-of-arasan.c | 5 ++++- >> 1 file changed, 4 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c >> index c9e3e050ccc8..88dc3f00a5be 100644 >> --- a/drivers/mmc/host/sdhci-of-arasan.c >> +++ b/drivers/mmc/host/sdhci-of-arasan.c >> @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device *pdev) >> host->mmc_host_ops.start_signal_voltage_switch = >> sdhci_arasan_voltage_switch; >> sdhci_arasan->has_cqe = true; >> - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; >> + host->mmc->caps2 |= MMC_CAP2_CQE; >> + >> + if (!of_property_read_bool(np, "disable-cqe-dcmd")) >> + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; >> } >> >> ret = sdhci_arasan_add_host(sdhci_arasan); >> > > > >
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index c9e3e050ccc8..88dc3f00a5be 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device *pdev) host->mmc_host_ops.start_signal_voltage_switch = sdhci_arasan_voltage_switch; sdhci_arasan->has_cqe = true; - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + host->mmc->caps2 |= MMC_CAP2_CQE; + + if (!of_property_read_bool(np, "disable-cqe-dcmd")) + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; } ret = sdhci_arasan_add_host(sdhci_arasan);