@@ -1068,15 +1068,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
- else if (chip->ecc_strength_ds)
- req.ecc.strength = chip->ecc_strength_ds;
+ else if (chip->base.eccreq.strength)
+ req.ecc.strength = chip->base.eccreq.strength;
else
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
if (chip->ecc.size)
req.ecc.sectorsize = chip->ecc.size;
- else if (chip->ecc_step_ds)
- req.ecc.sectorsize = chip->ecc_step_ds;
+ else if (chip->base.eccreq.step_size)
+ req.ecc.sectorsize = chip->base.eccreq.step_size;
else
req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
@@ -204,7 +204,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
default:
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
- chip->ecc_strength_ds, chip->ecc_step_ds);
+ chip->base.eccreq.strength,
+ chip->base.eccreq.step_size);
return -EINVAL;
}
geo->ecc_chunk_size = ecc_step;
@@ -417,11 +418,13 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this)
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
|| legacy_set_geometry(this)) {
- if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+ if (!(chip->base.eccreq.strength > 0 &&
+ chip->base.eccreq.step_size > 0))
return -EINVAL;
- return set_geometry_by_ecc_info(this, chip->ecc_strength_ds,
- chip->ecc_step_ds);
+ return set_geometry_by_ecc_info(this,
+ chip->base.eccreq.strength,
+ chip->base.eccreq.step_size);
}
return 0;
@@ -2248,9 +2248,9 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
int ret;
if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
- if (chip->ecc_step_ds && chip->ecc_strength_ds) {
- ecc->size = chip->ecc_step_ds;
- ecc->strength = chip->ecc_strength_ds;
+ if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+ ecc->size = chip->base.eccreq.step_size;
+ ecc->strength = chip->base.eccreq.strength;
} else {
dev_info(nfc->dev,
"No minimum ECC strength, using 1b/512B\n");
@@ -1197,8 +1197,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
/* if optional dt settings not present */
if (!nand->ecc.size || !nand->ecc.strength) {
/* use datasheet requirements */
- nand->ecc.strength = nand->ecc_strength_ds;
- nand->ecc.size = nand->ecc_step_ds;
+ nand->ecc.strength = nand->base.eccreq.strength;
+ nand->ecc.size = nand->base.eccreq.step_size;
/*
* align eccstrength and eccsize
@@ -4592,8 +4592,8 @@ static bool find_full_id_nand(struct nand_chip *chip,
memorg->pagesize *
memorg->pages_per_eraseblock);
chip->options |= type->options;
- chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
- chip->ecc_step_ds = NAND_ECC_STEP(type);
+ chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
+ chip->base.eccreq.step_size = NAND_ECC_STEP(type);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
@@ -5266,8 +5266,8 @@ nand_match_ecc_req(struct nand_chip *chip,
{
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_ecc_step_info *stepinfo;
- int req_step = chip->ecc_step_ds;
- int req_strength = chip->ecc_strength_ds;
+ int req_step = chip->base.eccreq.step_size;
+ int req_strength = chip->base.eccreq.strength;
int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
int best_step, best_strength, best_ecc_bytes;
int best_ecc_bytes_total = INT_MAX;
@@ -5460,7 +5460,7 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
struct nand_ecc_ctrl *ecc = &chip->ecc;
int corr, ds_corr;
- if (ecc->size == 0 || chip->ecc_step_ds == 0)
+ if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
/* Not enough information */
return true;
@@ -5469,9 +5469,10 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+ ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
+ chip->base.eccreq.step_size;
- return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+ return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
}
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
@@ -14,20 +14,20 @@ static void esmt_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte. */
if (chip->id.len >= 5 && nand_is_slc(chip)) {
- chip->ecc_step_ds = 512;
+ chip->base.eccreq.step_size = 512;
switch (chip->id.data[4] & 0x3) {
case 0x0:
- chip->ecc_strength_ds = 4;
+ chip->base.eccreq.strength = 4;
break;
case 0x1:
- chip->ecc_strength_ds = 2;
+ chip->base.eccreq.strength = 2;
break;
case 0x2:
- chip->ecc_strength_ds = 1;
+ chip->base.eccreq.strength = 1;
break;
default:
WARN(1, "Could not get ECC info");
- chip->ecc_step_ds = 0;
+ chip->base.eccreq.step_size = 0;
break;
}
}
@@ -508,30 +508,30 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (valid_jedecid) {
/* Reference: H27UCG8T2E datasheet */
- chip->ecc_step_ds = 1024;
+ chip->base.eccreq.step_size = 1024;
switch (ecc_level) {
case 0:
- chip->ecc_step_ds = 0;
- chip->ecc_strength_ds = 0;
+ chip->base.eccreq.step_size = 0;
+ chip->base.eccreq.strength = 0;
break;
case 1:
- chip->ecc_strength_ds = 4;
+ chip->base.eccreq.strength = 4;
break;
case 2:
- chip->ecc_strength_ds = 24;
+ chip->base.eccreq.strength = 24;
break;
case 3:
- chip->ecc_strength_ds = 32;
+ chip->base.eccreq.strength = 32;
break;
case 4:
- chip->ecc_strength_ds = 40;
+ chip->base.eccreq.strength = 40;
break;
case 5:
- chip->ecc_strength_ds = 50;
+ chip->base.eccreq.strength = 50;
break;
case 6:
- chip->ecc_strength_ds = 60;
+ chip->base.eccreq.strength = 60;
break;
default:
/*
@@ -552,14 +552,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (nand_tech < 3) {
/* > 26nm, reference: H27UBG8T2A datasheet */
if (ecc_level < 5) {
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1 << ecc_level;
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1 << ecc_level;
} else if (ecc_level < 7) {
if (ecc_level == 5)
- chip->ecc_step_ds = 2048;
+ chip->base.eccreq.step_size = 2048;
else
- chip->ecc_step_ds = 1024;
- chip->ecc_strength_ds = 24;
+ chip->base.eccreq.step_size = 1024;
+ chip->base.eccreq.strength = 24;
} else {
/*
* We should never reach this case, but if that
@@ -572,14 +572,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
} else {
/* <= 26nm, reference: H27UBG8T2B datasheet */
if (!ecc_level) {
- chip->ecc_step_ds = 0;
- chip->ecc_strength_ds = 0;
+ chip->base.eccreq.step_size = 0;
+ chip->base.eccreq.strength = 0;
} else if (ecc_level < 5) {
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1 << (ecc_level - 1);
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1 << (ecc_level - 1);
} else {
- chip->ecc_step_ds = 1024;
- chip->ecc_strength_ds = 24 +
+ chip->base.eccreq.step_size = 1024;
+ chip->base.eccreq.strength = 24 +
(8 * (ecc_level - 5));
}
}
@@ -110,8 +110,8 @@ int nand_jedec_detect(struct nand_chip *chip)
ecc = &p->ecc_info[0];
if (ecc->codeword_size >= 9) {
- chip->ecc_strength_ds = ecc->ecc_bits;
- chip->ecc_step_ds = 1 << ecc->codeword_size;
+ chip->base.eccreq.strength = ecc->ecc_bits;
+ chip->base.eccreq.step_size = 1 << ecc->codeword_size;
} else {
pr_warn("Invalid codeword size\n");
}
@@ -391,7 +391,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
+ if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
/* 0x2 means on-die ECC is available. */
@@ -424,7 +424,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
+ if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
return MICRON_ON_DIE_SUPPORTED;
@@ -479,7 +479,7 @@ static int micron_nand_init(struct nand_chip *chip)
* That's not needed for 8-bit ECC, because the status expose
* a better approximation of the number of bitflips in a page.
*/
- if (chip->ecc_strength_ds == 4) {
+ if (chip->base.eccreq.strength == 4) {
micron->ecc.rawbuf = kmalloc(mtd->writesize +
mtd->oobsize,
GFP_KERNEL);
@@ -489,16 +489,16 @@ static int micron_nand_init(struct nand_chip *chip)
}
}
- if (chip->ecc_strength_ds == 4)
+ if (chip->base.eccreq.strength == 4)
mtd_set_ooblayout(mtd,
µn_nand_on_die_4_ooblayout_ops);
else
mtd_set_ooblayout(mtd,
µn_nand_on_die_8_ooblayout_ops);
- chip->ecc.bytes = chip->ecc_strength_ds * 2;
+ chip->ecc.bytes = chip->base.eccreq.strength * 2;
chip->ecc.size = 512;
- chip->ecc.strength = chip->ecc_strength_ds;
+ chip->ecc.strength = chip->base.eccreq.strength;
chip->ecc.algo = NAND_ECC_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
@@ -94,8 +94,8 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
goto ext_out;
}
- chip->ecc_strength_ds = ecc->ecc_bits;
- chip->ecc_step_ds = 1 << ecc->codeword_size;
+ chip->base.eccreq.strength = ecc->ecc_bits;
+ chip->base.eccreq.step_size = 1 << ecc->codeword_size;
ret = 0;
ext_out:
@@ -252,8 +252,8 @@ int nand_onfi_detect(struct nand_chip *chip)
chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
- chip->ecc_strength_ds = p->ecc_bits;
- chip->ecc_step_ds = 512;
+ chip->base.eccreq.strength = p->ecc_bits;
+ chip->base.eccreq.step_size = 512;
} else if (onfi_version >= 21 &&
(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
@@ -80,23 +80,23 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1 << extid;
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1 << extid;
} else {
- chip->ecc_step_ds = 1024;
+ chip->base.eccreq.step_size = 1024;
switch (extid) {
case 5:
- chip->ecc_strength_ds = 24;
+ chip->base.eccreq.strength = 24;
break;
case 6:
- chip->ecc_strength_ds = 40;
+ chip->base.eccreq.strength = 40;
break;
case 7:
- chip->ecc_strength_ds = 60;
+ chip->base.eccreq.strength = 60;
break;
default:
WARN(1, "Could not decode ECC info");
- chip->ecc_step_ds = 0;
+ chip->base.eccreq.step_size = 0;
}
}
} else {
@@ -106,8 +106,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
switch (chip->id.data[1]) {
/* K9F4G08U0D-S[I|C]B0(T00) */
case 0xDC:
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1;
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1;
break;
/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -130,20 +130,20 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
* - 24nm: 8 bit ECC for each 512Byte is required.
*/
if (chip->id.len >= 6 && nand_is_slc(chip)) {
- chip->ecc_step_ds = 512;
+ chip->base.eccreq.step_size = 512;
switch (chip->id.data[5] & 0x7) {
case 0x4:
- chip->ecc_strength_ds = 1;
+ chip->base.eccreq.strength = 1;
break;
case 0x5:
- chip->ecc_strength_ds = 4;
+ chip->base.eccreq.strength = 4;
break;
case 0x6:
- chip->ecc_strength_ds = 8;
+ chip->base.eccreq.strength = 8;
break;
default:
WARN(1, "Could not get ECC info");
- chip->ecc_step_ds = 0;
+ chip->base.eccreq.step_size = 0;
break;
}
}
@@ -1821,8 +1821,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_SUBPAGE_READ;
if (!ecc->size) {
- ecc->size = nand->ecc_step_ds;
- ecc->strength = nand->ecc_strength_ds;
+ ecc->size = nand->base.eccreq.step_size;
+ ecc->strength = nand->base.eccreq.strength;
}
if (!ecc->size || !ecc->strength)
@@ -853,7 +853,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
} else {
strength_sel = strength[i];
- if (strength_sel < chip->ecc_strength_ds)
+ if (strength_sel < chip->base.eccreq.strength)
continue;
}
@@ -917,9 +917,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->ecc_step_ds != 512) {
+ if (chip->base.eccreq.step_size != 512) {
dev_err(ctrl->dev, "Unsupported step size %d\n",
- chip->ecc_step_ds);
+ chip->base.eccreq.step_size);
return -EINVAL;
}
@@ -950,7 +950,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (ret < 0) {
dev_err(ctrl->dev,
"No valid strength found, minimum %d\n",
- chip->ecc_strength_ds);
+ chip->base.eccreq.strength);
return ret;
}
@@ -1004,12 +1004,6 @@ struct nand_legacy {
* @badblockbits: [INTERN] minimum number of set bits in a good block's
* bad block marker position; i.e., BBM == 11110111b is
* not bad when badblockbits == 7
- * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet.
- * Minimum amount of bit errors per @ecc_step_ds guaranteed
- * to be correctable. If unknown, set to zero.
- * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
- * also from the datasheet. It is the recommended ECC step
- * size, if known; if unknown, set to zero.
* @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
* set to the actually used ONFI mode if the chip is
* ONFI compliant or deduced from the datasheet if
@@ -1069,8 +1063,6 @@ struct nand_chip {
} pagecache;
int subpagesize;
- uint16_t ecc_strength_ds;
- uint16_t ecc_step_ds;
int onfi_timing_mode_default;
int badblockpos;
int badblockbits;