diff mbox series

[v4,3/7] arm64: dts: rockchip: Specify override mode for kevin panel

Message ID 20190328171710.31949-4-dianders@chromium.org (mailing list archive)
State New, archived
Headers show
Series drm/panel: simple: Add mode support to devicetree | expand

Commit Message

Doug Anderson March 28, 2019, 5:17 p.m. UTC
From: Sean Paul <seanpaul@chromium.org>

This patch adds an override mode for kevin devices. The mode increases
both back porches to allow a pixel clock of 26666kHz as opposed to the
'typical' value of 252750kHz. This is needed to avoid interference with
the touch digitizer on these laptops.

Cc: Doug Anderson <dianders@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v4:
- Rebase to top of Heiko's tree
- Converted changelog to after-the-cut for non-DRM change.

Changes in v3:
- Unwrap the timing from display-timings and rename panel-timing (Rob)

Changes in v2:
- Wrap the timing in display-timings node to match binding (Rob/Thierry)

 arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 15e254a77391..454f4149585f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -43,6 +43,20 @@ 
 		backlight = <&backlight>;
 		power-supply = <&pp3300_disp>;
 
+		panel-timing {
+			clock-frequency = <266604720>;
+			hactive = <2400>;
+			hfront-porch = <48>;
+			hback-porch = <84>;
+			hsync-len = <32>;
+			hsync-active = <0>;
+			vactive = <1600>;
+			vfront-porch = <3>;
+			vback-porch = <120>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+		};
+
 		port {
 			panel_in_edp: endpoint {
 				remote-endpoint = <&edp_out_panel>;