diff mbox series

[v3,06/11] PCI: imx6: Make use of BIT() in constant definitions

Message ID 20190401042547.14067-7-andrew.smirnov@gmail.com (mailing list archive)
State New, archived
Headers show
Series i.MX6, DesignWare PCI improvements | expand

Commit Message

Andrey Smirnov April 1, 2019, 4:25 a.m. UTC
Avoid using explicit left shifts and convert various definitions to
use BIT() instead. No functional change intended.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Lucas Stach April 12, 2019, 3:56 p.m. UTC | #1
Am Sonntag, den 31.03.2019, 21:25 -0700 schrieb Andrey Smirnov:
> Avoid using explicit left shifts and convert various definitions to
> use BIT() instead. No functional change intended.
> 
> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Fabio Estevam <fabio.estevam@nxp.com>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Leonard Crestez <leonard.crestez@nxp.com>
> > Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> > Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index bb95a3273ca2..b1f30b94fb30 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -118,14 +118,14 @@ struct imx6_pcie {
>  
>  /* PHY registers (not memory-mapped) */
> >  #define PCIE_PHY_ATEOVRD			0x10
> > -#define  PCIE_PHY_ATEOVRD_EN			(0x1 << 2)
> > +#define  PCIE_PHY_ATEOVRD_EN			BIT(2)
> >  #define  PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT	0
> >  #define  PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK	0x1
>  
> >  #define PCIE_PHY_MPLL_OVRD_IN_LO		0x11
> >  #define  PCIE_PHY_MPLL_MULTIPLIER_SHIFT		2
> >  #define  PCIE_PHY_MPLL_MULTIPLIER_MASK		0x7f
> > -#define  PCIE_PHY_MPLL_MULTIPLIER_OVRD		(0x1 << 9)
> > +#define  PCIE_PHY_MPLL_MULTIPLIER_OVRD		BIT(9)
>  
>  #define PCIE_PHY_RX_ASIC_OUT 0x100D
> >  #define PCIE_PHY_RX_ASIC_OUT_VALID	(1 << 0)
> @@ -148,8 +148,8 @@ struct imx6_pcie {
> >  #define PCIE_PHY_CMN_REG26_ATT_MODE	0xBC
>  
>  #define PHY_RX_OVRD_IN_LO 0x1005
> -#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
> -#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
> > +#define PHY_RX_OVRD_IN_LO_RX_DATA_EN		BIT(5)
> > +#define PHY_RX_OVRD_IN_LO_RX_PLL_EN		BIT(3)
>  
>  static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, int exp_val)
>  {
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index bb95a3273ca2..b1f30b94fb30 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -118,14 +118,14 @@  struct imx6_pcie {
 
 /* PHY registers (not memory-mapped) */
 #define PCIE_PHY_ATEOVRD			0x10
-#define  PCIE_PHY_ATEOVRD_EN			(0x1 << 2)
+#define  PCIE_PHY_ATEOVRD_EN			BIT(2)
 #define  PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT	0
 #define  PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK	0x1
 
 #define PCIE_PHY_MPLL_OVRD_IN_LO		0x11
 #define  PCIE_PHY_MPLL_MULTIPLIER_SHIFT		2
 #define  PCIE_PHY_MPLL_MULTIPLIER_MASK		0x7f
-#define  PCIE_PHY_MPLL_MULTIPLIER_OVRD		(0x1 << 9)
+#define  PCIE_PHY_MPLL_MULTIPLIER_OVRD		BIT(9)
 
 #define PCIE_PHY_RX_ASIC_OUT 0x100D
 #define PCIE_PHY_RX_ASIC_OUT_VALID	(1 << 0)
@@ -148,8 +148,8 @@  struct imx6_pcie {
 #define PCIE_PHY_CMN_REG26_ATT_MODE	0xBC
 
 #define PHY_RX_OVRD_IN_LO 0x1005
-#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
-#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN		BIT(5)
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN		BIT(3)
 
 static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, int exp_val)
 {