diff mbox series

[14/15] arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes

Message ID 20190401165131.23370-15-miquel.raynal@bootlin.com
State New, archived
Headers show
Series Enhance CP110 COMPHY support | expand

Commit Message

Miquel Raynal April 1, 2019, 4:51 p.m. UTC
Fill-in the missing PCIe phys/phy-names DT properties of Armada 7k/8k
based boards.

The MacchiatoBin is a bit particular as the Armada8k-PCI IP supports
x4 link widths and in this case the PHY for each lane must be
referenced.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts         |  2 ++
 .../boot/dts/marvell/armada-8040-clearfog-gt-8k.dts    |  2 ++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts         | 10 ++++++++++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi     |  4 ++++
 4 files changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 09e1805565c8..131ce4229db0 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -96,6 +96,8 @@ 
 
 &cp0_pcie2 {
 	status = "okay";
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
 };
 
 &cp0_i2c0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 04e64743de14..b3716d206fbf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -237,6 +237,8 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_pci0_reset_pins>;
 	reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 057af4ea2570..91c51188650a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -111,11 +111,15 @@ 
 
 /* CON6 on CP0 expansion */
 &cp0_pcie0 {
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
 	status = "okay";
 };
 
 /* CON5 on CP0 expansion */
 &cp0_pcie2 {
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
 	status = "okay";
 };
 
@@ -201,16 +205,22 @@ 
 
 /* CON6 on CP1 expansion */
 &cp1_pcie0 {
+	phys = <&cp1_comphy0 0>;
+	phy-names = "cp1-pcie0-x1-phy";
 	status = "okay";
 };
 
 /* CON7 on CP1 expansion */
 &cp1_pcie1 {
+	phys = <&cp1_comphy4 1>;
+	phy-names = "cp1-pcie1-x1-phy";
 	status = "okay";
 };
 
 /* CON5 on CP1 expansion */
 &cp1_pcie2 {
+	phys = <&cp1_comphy5 2>;
+	phy-names = "cp1-pcie2-x1-phy";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index f0ead11cc5fa..0639437ab4b4 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -184,6 +184,10 @@ 
 	num-lanes = <4>;
 	num-viewport = <8>;
 	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
+	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
+		    "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
 	status = "okay";
 };