diff mbox series

[1/7] thermal/drivers/core: Remove the module Kconfig's option

Message ID 20190402161256.11044-1-daniel.lezcano@linaro.org (mailing list archive)
State New, archived
Headers show
Series [1/7] thermal/drivers/core: Remove the module Kconfig's option | expand

Commit Message

Daniel Lezcano April 2, 2019, 4:12 p.m. UTC 
The module support for the thermal subsystem makes little sense:
 - some subsystems relying on it are not modules, thus forcing the
   framework to be compiled in
 - it is compiled in for almost every configs, the remaining ones
   are a few platforms where I don't see why we can not switch the thermal
   to 'y'. The drivers can stay in tristate.
 - platforms need the thermal to be ready as soon as possible at boot time
   in order to mitigate

Usually the subsystems framework are compiled-in and the plugs are as module.

Remove the module option. The removal of the module related dead code will
come after this patch gets in or is acked.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <groeck@chromium.org>
For mini2440:
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/configs/mini2440_defconfig        | 2 +-
 arch/arm/configs/pxa_defconfig             | 2 +-
 arch/mips/configs/ip22_defconfig           | 2 +-
 arch/mips/configs/ip27_defconfig           | 2 +-
 arch/unicore32/configs/unicore32_defconfig | 2 +-
 drivers/thermal/Kconfig                    | 4 ++--
 6 files changed, 7 insertions(+), 7 deletions(-)

Comments

Paul Burton April 3, 2019, 10:55 p.m. UTC | #1 
Hi Daniel,

On Tue, Apr 02, 2019 at 06:12:44PM +0200, Daniel Lezcano wrote:
> The module support for the thermal subsystem makes little sense:
>  - some subsystems relying on it are not modules, thus forcing the
>    framework to be compiled in
>  - it is compiled in for almost every configs, the remaining ones
>    are a few platforms where I don't see why we can not switch the thermal
>    to 'y'. The drivers can stay in tristate.
>  - platforms need the thermal to be ready as soon as possible at boot time
>    in order to mitigate

Nit: mitigate what? High temperatures? It feels like this sentence was
cut short.

> Usually the subsystems framework are compiled-in and the plugs are as module.
> 
> Remove the module option. The removal of the module related dead code will
> come after this patch gets in or is acked.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Acked-by: Guenter Roeck <groeck@chromium.org>
> For mini2440:
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part

Thanks,
    Paul
Robert Jarzmik April 4, 2019, 8:40 p.m. UTC | #2 
Daniel Lezcano <daniel.lezcano@linaro.org> writes:

> The module support for the thermal subsystem makes little sense:
>  - some subsystems relying on it are not modules, thus forcing the
>    framework to be compiled in
>  - it is compiled in for almost every configs, the remaining ones
>    are a few platforms where I don't see why we can not switch the thermal
>    to 'y'. The drivers can stay in tristate.
>  - platforms need the thermal to be ready as soon as possible at boot time
>    in order to mitigate
>
> Usually the subsystems framework are compiled-in and the plugs are as module.
>
> Remove the module option. The removal of the module related dead code will
> come after this patch gets in or is acked.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Acked-by: Guenter Roeck <groeck@chromium.org>
> For mini2440:
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
For pxa:
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

Cheers.

--
Robert
Eduardo Valentin April 23, 2019, 3:52 p.m. UTC | #3 
Hello,

On Tue, Apr 02, 2019 at 06:12:44PM +0200, Daniel Lezcano wrote:
> The module support for the thermal subsystem makes little sense:
>  - some subsystems relying on it are not modules, thus forcing the
>    framework to be compiled in
>  - it is compiled in for almost every configs, the remaining ones
>    are a few platforms where I don't see why we can not switch the thermal
>    to 'y'. The drivers can stay in tristate.
>  - platforms need the thermal to be ready as soon as possible at boot time
>    in order to mitigate
> 
> Usually the subsystems framework are compiled-in and the plugs are as module.
> 
> Remove the module option. The removal of the module related dead code will
> come after this patch gets in or is acked.


I remember some buzilla entry around this some time back.

Rui, do you remember why you made this to be module?

I dont have strong opinion here, but I would like to see
a better description why we are going this direction rather
than "most people dont use it as module". Was there any particular
specific technical motivation?


> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Acked-by: Guenter Roeck <groeck@chromium.org>
> For mini2440:
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  arch/arm/configs/mini2440_defconfig        | 2 +-
>  arch/arm/configs/pxa_defconfig             | 2 +-
>  arch/mips/configs/ip22_defconfig           | 2 +-
>  arch/mips/configs/ip27_defconfig           | 2 +-
>  arch/unicore32/configs/unicore32_defconfig | 2 +-
>  drivers/thermal/Kconfig                    | 4 ++--
>  6 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
> index d95a8059d30b..0cf1c120c4bb 100644
> --- a/arch/arm/configs/mini2440_defconfig
> +++ b/arch/arm/configs/mini2440_defconfig
> @@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y
>  CONFIG_SPI_SPIDEV=y
>  CONFIG_GPIO_SYSFS=y
>  CONFIG_SENSORS_LM75=y
> -CONFIG_THERMAL=m
> +CONFIG_THERMAL=y
>  CONFIG_WATCHDOG=y
>  CONFIG_S3C2410_WATCHDOG=y
>  CONFIG_FB=y
> diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
> index d4654755b09c..d4f9dda3a52f 100644
> --- a/arch/arm/configs/pxa_defconfig
> +++ b/arch/arm/configs/pxa_defconfig
> @@ -387,7 +387,7 @@ CONFIG_SENSORS_LM75=m
>  CONFIG_SENSORS_LM90=m
>  CONFIG_SENSORS_LM95245=m
>  CONFIG_SENSORS_NTC_THERMISTOR=m
> -CONFIG_THERMAL=m
> +CONFIG_THERMAL=y
>  CONFIG_WATCHDOG=y
>  CONFIG_XILINX_WATCHDOG=m
>  CONFIG_SA1100_WATCHDOG=m
> diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
> index ff40fbc2f439..21a1168ae301 100644
> --- a/arch/mips/configs/ip22_defconfig
> +++ b/arch/mips/configs/ip22_defconfig
> @@ -228,7 +228,7 @@ CONFIG_SERIAL_IP22_ZILOG=m
>  # CONFIG_HW_RANDOM is not set
>  CONFIG_RAW_DRIVER=m
>  # CONFIG_HWMON is not set
> -CONFIG_THERMAL=m
> +CONFIG_THERMAL=y
>  CONFIG_WATCHDOG=y
>  CONFIG_INDYDOG=m
>  # CONFIG_VGA_CONSOLE is not set
> diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
> index 81c47e18131b..54db5dedf776 100644
> --- a/arch/mips/configs/ip27_defconfig
> +++ b/arch/mips/configs/ip27_defconfig
> @@ -271,7 +271,7 @@ CONFIG_I2C_PARPORT_LIGHT=m
>  CONFIG_I2C_TAOS_EVM=m
>  CONFIG_I2C_STUB=m
>  # CONFIG_HWMON is not set
> -CONFIG_THERMAL=m
> +CONFIG_THERMAL=y
>  CONFIG_MFD_PCF50633=m
>  CONFIG_PCF50633_ADC=m
>  CONFIG_PCF50633_GPIO=m
> diff --git a/arch/unicore32/configs/unicore32_defconfig b/arch/unicore32/configs/unicore32_defconfig
> index aebd01fc28e5..360cc9abcdb0 100644
> --- a/arch/unicore32/configs/unicore32_defconfig
> +++ b/arch/unicore32/configs/unicore32_defconfig
> @@ -119,7 +119,7 @@ CONFIG_I2C_PUV3=y
>  #	Hardware Monitoring support
>  #CONFIG_SENSORS_LM75=m
>  #	Generic Thermal sysfs driver
> -#CONFIG_THERMAL=m
> +#CONFIG_THERMAL=y
>  #CONFIG_THERMAL_HWMON=y
>  
>  #	Multimedia support
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 653aa27a25a4..ccf5b9408d7a 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -3,7 +3,7 @@
>  #
>  
>  menuconfig THERMAL
> -	tristate "Generic Thermal sysfs driver"
> +	bool "Generic Thermal sysfs driver"
>  	help
>  	  Generic Thermal Sysfs driver offers a generic mechanism for
>  	  thermal management. Usually it's made up of one or more thermal
> @@ -11,7 +11,7 @@ menuconfig THERMAL
>  	  Each thermal zone contains its own temperature, trip points,
>  	  cooling devices.
>  	  All platforms with ACPI thermal support can use this driver.
> -	  If you want this support, you should say Y or M here.
> +	  If you want this support, you should say Y here.
>  
>  if THERMAL
>  
> -- 
> 2.17.1
>
Amit Kucheria April 24, 2019, 5:45 a.m. UTC | #4 
On Tue, Apr 23, 2019 at 9:22 PM Eduardo Valentin <edubezval@gmail.com> wrote:
>
> Hello,
>
> On Tue, Apr 02, 2019 at 06:12:44PM +0200, Daniel Lezcano wrote:
> > The module support for the thermal subsystem makes little sense:
> >  - some subsystems relying on it are not modules, thus forcing the
> >    framework to be compiled in
> >  - it is compiled in for almost every configs, the remaining ones
> >    are a few platforms where I don't see why we can not switch the thermal
> >    to 'y'. The drivers can stay in tristate.
> >  - platforms need the thermal to be ready as soon as possible at boot time
> >    in order to mitigate
> >
> > Usually the subsystems framework are compiled-in and the plugs are as module.
> >
> > Remove the module option. The removal of the module related dead code will
> > come after this patch gets in or is acked.
>
>
> I remember some buzilla entry around this some time back.
>
> Rui, do you remember why you made this to be module?
>
> I dont have strong opinion here, but I would like to see
> a better description why we are going this direction rather
> than "most people dont use it as module". Was there any particular
> specific technical motivation?

Speaking for Qualcomm platforms, we want the thermal subsystem
available as soon as possible for boot time thermal mitigation since
faster boot times equals hotter cpus. Also the dependency on cpufreq
subsystem due to the cpufreq cooling device would be simplified with
this.

In fact, I now have a follow on patch to move thermal init earlier
than fs_initcall since we'd now not wait on modules to be available.

/Amit
Zhang Rui April 24, 2019, 1:02 p.m. UTC | #5 
On 二, 2019-04-23 at 08:52 -0700, Eduardo Valentin wrote:
> Hello,
> 
> On Tue, Apr 02, 2019 at 06:12:44PM +0200, Daniel Lezcano wrote:
> > 
> > The module support for the thermal subsystem makes little sense:
> >  - some subsystems relying on it are not modules, thus forcing the
> >    framework to be compiled in
> >  - it is compiled in for almost every configs, the remaining ones
> >    are a few platforms where I don't see why we can not switch the
> > thermal
> >    to 'y'. The drivers can stay in tristate.
> >  - platforms need the thermal to be ready as soon as possible at
> > boot time
> >    in order to mitigate
> > 
> > Usually the subsystems framework are compiled-in and the plugs are
> > as module.
> > 
> > Remove the module option. The removal of the module related dead
> > code will
> > come after this patch gets in or is acked.
> 
> I remember some buzilla entry around this some time back.
> 
> Rui, do you remember why you made this to be module?
> 
> I dont have strong opinion here, but I would like to see
> a better description why we are going this direction rather
> than "most people dont use it as module". Was there any particular
> specific technical motivation?
> 
I checked the change log, it seems that we make CONFIG_THERMAL from
bool to tristate long time ago.

commit 63c4ec905d63834a97ec7dbbf0a2ec89ef5872be
Author:     Zhang Rui <rui.zhang@intel.com>
AuthorDate: Mon Apr 21 16:07:13 2008 +0800
Commit:     Len Brown <len.brown@intel.com>
CommitDate: Tue Apr 29 02:44:00 2008 -0400

    thermal: add the support for building the generic thermal as a
module
    
    Build the generic thermal driver as module "thermal_sys".
    
    Make ACPI thermal, video, processor and fan SELECT the generic
    thermal driver, as these drivers rely on it to build the sysfs I/F.
    
    Signed-off-by: Zhang Rui <rui.zhang@intel.com>
    Acked-by: Jean Delvare <khali@linux-fr.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

But the things described in the changelog does not seem to be a solid
reason why we need thermal to be a module.

Anyway, let's try bool instead of tristate and see if everything still
works well.

thanks,
rui
> 
> > 
> > 
> > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Acked-by: Guenter Roeck <groeck@chromium.org>
> > For mini2440:
> > Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  arch/arm/configs/mini2440_defconfig        | 2 +-
> >  arch/arm/configs/pxa_defconfig             | 2 +-
> >  arch/mips/configs/ip22_defconfig           | 2 +-
> >  arch/mips/configs/ip27_defconfig           | 2 +-
> >  arch/unicore32/configs/unicore32_defconfig | 2 +-
> >  drivers/thermal/Kconfig                    | 4 ++--
> >  6 files changed, 7 insertions(+), 7 deletions(-)
> > 
> > diff --git a/arch/arm/configs/mini2440_defconfig
> > b/arch/arm/configs/mini2440_defconfig
> > index d95a8059d30b..0cf1c120c4bb 100644
> > --- a/arch/arm/configs/mini2440_defconfig
> > +++ b/arch/arm/configs/mini2440_defconfig
> > @@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y
> >  CONFIG_SPI_SPIDEV=y
> >  CONFIG_GPIO_SYSFS=y
> >  CONFIG_SENSORS_LM75=y
> > -CONFIG_THERMAL=m
> > +CONFIG_THERMAL=y
> >  CONFIG_WATCHDOG=y
> >  CONFIG_S3C2410_WATCHDOG=y
> >  CONFIG_FB=y
> > diff --git a/arch/arm/configs/pxa_defconfig
> > b/arch/arm/configs/pxa_defconfig
> > index d4654755b09c..d4f9dda3a52f 100644
> > --- a/arch/arm/configs/pxa_defconfig
> > +++ b/arch/arm/configs/pxa_defconfig
> > @@ -387,7 +387,7 @@ CONFIG_SENSORS_LM75=m
> >  CONFIG_SENSORS_LM90=m
> >  CONFIG_SENSORS_LM95245=m
> >  CONFIG_SENSORS_NTC_THERMISTOR=m
> > -CONFIG_THERMAL=m
> > +CONFIG_THERMAL=y
> >  CONFIG_WATCHDOG=y
> >  CONFIG_XILINX_WATCHDOG=m
> >  CONFIG_SA1100_WATCHDOG=m
> > diff --git a/arch/mips/configs/ip22_defconfig
> > b/arch/mips/configs/ip22_defconfig
> > index ff40fbc2f439..21a1168ae301 100644
> > --- a/arch/mips/configs/ip22_defconfig
> > +++ b/arch/mips/configs/ip22_defconfig
> > @@ -228,7 +228,7 @@ CONFIG_SERIAL_IP22_ZILOG=m
> >  # CONFIG_HW_RANDOM is not set
> >  CONFIG_RAW_DRIVER=m
> >  # CONFIG_HWMON is not set
> > -CONFIG_THERMAL=m
> > +CONFIG_THERMAL=y
> >  CONFIG_WATCHDOG=y
> >  CONFIG_INDYDOG=m
> >  # CONFIG_VGA_CONSOLE is not set
> > diff --git a/arch/mips/configs/ip27_defconfig
> > b/arch/mips/configs/ip27_defconfig
> > index 81c47e18131b..54db5dedf776 100644
> > --- a/arch/mips/configs/ip27_defconfig
> > +++ b/arch/mips/configs/ip27_defconfig
> > @@ -271,7 +271,7 @@ CONFIG_I2C_PARPORT_LIGHT=m
> >  CONFIG_I2C_TAOS_EVM=m
> >  CONFIG_I2C_STUB=m
> >  # CONFIG_HWMON is not set
> > -CONFIG_THERMAL=m
> > +CONFIG_THERMAL=y
> >  CONFIG_MFD_PCF50633=m
> >  CONFIG_PCF50633_ADC=m
> >  CONFIG_PCF50633_GPIO=m
> > diff --git a/arch/unicore32/configs/unicore32_defconfig
> > b/arch/unicore32/configs/unicore32_defconfig
> > index aebd01fc28e5..360cc9abcdb0 100644
> > --- a/arch/unicore32/configs/unicore32_defconfig
> > +++ b/arch/unicore32/configs/unicore32_defconfig
> > @@ -119,7 +119,7 @@ CONFIG_I2C_PUV3=y
> >  #	Hardware Monitoring support
> >  #CONFIG_SENSORS_LM75=m
> >  #	Generic Thermal sysfs driver
> > -#CONFIG_THERMAL=m
> > +#CONFIG_THERMAL=y
> >  #CONFIG_THERMAL_HWMON=y
> >  
> >  #	Multimedia support
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 653aa27a25a4..ccf5b9408d7a 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -3,7 +3,7 @@
> >  #
> >  
> >  menuconfig THERMAL
> > -	tristate "Generic Thermal sysfs driver"
> > +	bool "Generic Thermal sysfs driver"
> >  	help
> >  	  Generic Thermal Sysfs driver offers a generic mechanism
> > for
> >  	  thermal management. Usually it's made up of one or more
> > thermal
> > @@ -11,7 +11,7 @@ menuconfig THERMAL
> >  	  Each thermal zone contains its own temperature, trip
> > points,
> >  	  cooling devices.
> >  	  All platforms with ACPI thermal support can use this
> > driver.
> > -	  If you want this support, you should say Y or M here.
> > +	  If you want this support, you should say Y here.
> >  
> >  if THERMAL
> >
diff mbox series

Patch

diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index d95a8059d30b..0cf1c120c4bb 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -152,7 +152,7 @@  CONFIG_SPI_S3C24XX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_LM75=y
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_FB=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index d4654755b09c..d4f9dda3a52f 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -387,7 +387,7 @@  CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM95245=m
 CONFIG_SENSORS_NTC_THERMISTOR=m
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_XILINX_WATCHDOG=m
 CONFIG_SA1100_WATCHDOG=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index ff40fbc2f439..21a1168ae301 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -228,7 +228,7 @@  CONFIG_SERIAL_IP22_ZILOG=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=m
 # CONFIG_HWMON is not set
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_INDYDOG=m
 # CONFIG_VGA_CONSOLE is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 81c47e18131b..54db5dedf776 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -271,7 +271,7 @@  CONFIG_I2C_PARPORT_LIGHT=m
 CONFIG_I2C_TAOS_EVM=m
 CONFIG_I2C_STUB=m
 # CONFIG_HWMON is not set
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_MFD_PCF50633=m
 CONFIG_PCF50633_ADC=m
 CONFIG_PCF50633_GPIO=m
diff --git a/arch/unicore32/configs/unicore32_defconfig b/arch/unicore32/configs/unicore32_defconfig
index aebd01fc28e5..360cc9abcdb0 100644
--- a/arch/unicore32/configs/unicore32_defconfig
+++ b/arch/unicore32/configs/unicore32_defconfig
@@ -119,7 +119,7 @@  CONFIG_I2C_PUV3=y
 #	Hardware Monitoring support
 #CONFIG_SENSORS_LM75=m
 #	Generic Thermal sysfs driver
-#CONFIG_THERMAL=m
+#CONFIG_THERMAL=y
 #CONFIG_THERMAL_HWMON=y
 
 #	Multimedia support
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 653aa27a25a4..ccf5b9408d7a 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -3,7 +3,7 @@ 
 #
 
 menuconfig THERMAL
-	tristate "Generic Thermal sysfs driver"
+	bool "Generic Thermal sysfs driver"
 	help
 	  Generic Thermal Sysfs driver offers a generic mechanism for
 	  thermal management. Usually it's made up of one or more thermal
@@ -11,7 +11,7 @@  menuconfig THERMAL
 	  Each thermal zone contains its own temperature, trip points,
 	  cooling devices.
 	  All platforms with ACPI thermal support can use this driver.
-	  If you want this support, you should say Y or M here.
+	  If you want this support, you should say Y here.
 
 if THERMAL