diff mbox series

[v6,9/9] arm64: dts: Stingray: Add NIC i2c device node

Message ID 20190403011830.3254-10-ray.jui@broadcom.com (mailing list archive)
State New, archived
Headers show
Series iProc I2C slave mode and NIC mode | expand

Commit Message

Ray Jui April 3, 2019, 1:18 a.m. UTC 
From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>

Add NIC i2c device node.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 .../boot/dts/broadcom/stingray/stingray.dtsi   | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Florian Fainelli April 4, 2019, 4:28 p.m. UTC | #1 
On 4/2/19 6:18 PM, Ray Jui wrote:
> From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> 
> Add NIC i2c device node.
> 
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>

Applied to devicetree-arm64/next, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 35c4670c00d1..69306fbd14b4 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -612,4 +612,22 @@ 
 			status = "disabled";
 		};
 	};
+
+	nic-hsls {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0  0x0 0x7fffffff>;
+
+		nic_i2c0: i2c@60826100 {
+			compatible = "brcm,iproc-nic-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60826100 0x100>,
+			      <0x60e00408 0x1000>;
+			brcm,ape-hsls-addr-mask = <0x03400000>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+	};
 };