@@ -118,7 +118,7 @@ choice
depends on DEBUG_LL
config DEBUG_ALPINE_UART0
- bool "Kernel low-level debugging messages via Alpine UART0"
+ bool "Alpine UART0"
depends on ARCH_ALPINE
select DEBUG_UART_8250
help
@@ -126,7 +126,7 @@ choice
on Alpine based platforms.
config DEBUG_ASM9260_UART
- bool "Kernel low-level debugging via asm9260 UART"
+ bool "asm9260 UART"
depends on MACH_ASM9260
help
Say Y here if you want the debug print routines to direct
@@ -147,7 +147,7 @@ choice
0x80024000 | 0xf0024000 | UART9
config DEBUG_AT91_RM9200_DBGU
- bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+ bool "AT91RM9200, AT91SAM9 DBGU"
select DEBUG_AT91_UART
depends on SOC_AT91RM9200 || SOC_AT91SAM9
help
@@ -157,7 +157,7 @@ choice
at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
config DEBUG_AT91_SAM9263_DBGU
- bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+ bool "AT91SAM{9263,9G45,A5D3} DBGU"
select DEBUG_AT91_UART
depends on SOC_AT91SAM9 || SOC_SAMA5D3
help
@@ -167,7 +167,7 @@ choice
sama5d3
config DEBUG_AT91_SAMA5D2_UART1
- bool "Kernel low-level debugging on SAMA5D2 UART1"
+ bool "SAMA5D2 UART1"
select DEBUG_AT91_UART
depends on SOC_SAMA5D2
help
@@ -175,7 +175,7 @@ choice
on the UART1 port of sama5d2.
config DEBUG_AT91_SAMA5D4_USART3
- bool "Kernel low-level debugging on SAMA5D4 USART3"
+ bool "SAMA5D4 USART3"
select DEBUG_AT91_UART
depends on SOC_SAMA5D4
help
@@ -183,7 +183,7 @@ choice
on the USART3 port of sama5d4.
config DEBUG_AT91_SAMV7_USART1
- bool "Kernel low-level debugging via SAMV7 USART1"
+ bool "SAMV7 USART1"
select DEBUG_AT91_UART
depends on SOC_SAMV7
help
@@ -192,27 +192,27 @@ choice
machines.
config DEBUG_BCM2835
- bool "Kernel low-level debugging on BCM2835 PL011 UART"
+ bool "BCM2835 PL011 UART"
depends on ARCH_BCM2835 && ARCH_MULTI_V6
select DEBUG_UART_PL01X
config DEBUG_BCM2836
- bool "Kernel low-level debugging on BCM2836 PL011 UART"
+ bool "BCM2836 PL011 UART"
depends on ARCH_BCM2835 && ARCH_MULTI_V7
select DEBUG_UART_PL01X
config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+ bool "BCM5301X/NSP UART1"
depends on ARCH_BCM_5301X || ARCH_BCM_NSP
select DEBUG_UART_8250
config DEBUG_BCM_HR2
- bool "Kernel low-level debugging on Hurricane 2 UART2"
+ bool "Hurricane 2 UART2"
depends on ARCH_BCM_HR2
select DEBUG_UART_8250
config DEBUG_BCM_IPROC_UART3
- bool "Kernel low-level debugging on BCM IPROC UART3"
+ bool "BCM IPROC UART3"
depends on ARCH_BCM_CYGNUS
select DEBUG_UART_8250
help
@@ -220,7 +220,7 @@ choice
their output to the third serial port on these devices.
config DEBUG_BCM_KONA_UART
- bool "Kernel low-level debugging messages via BCM KONA UART"
+ bool "BCM KONA UART"
depends on ARCH_BCM_MOBILE
select DEBUG_UART_8250
help
@@ -231,7 +231,7 @@ choice
bcm11351, etc...)
config DEBUG_BCM63XX_UART
- bool "Kernel low-level debugging on BCM63XX UART"
+ bool "BCM63XX UART"
depends on ARCH_BCM_63XX
config DEBUG_BERLIN_UART
@@ -255,21 +255,21 @@ choice
messages to appear over the UART, select this option.
config DEBUG_CLPS711X_UART1
- bool "Kernel low-level debugging messages via UART1"
+ bool "UART1"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
config DEBUG_CLPS711X_UART2
- bool "Kernel low-level debugging messages via UART2"
+ bool "UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_CNS3XXX
- bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
+ bool "Kernel Cavium Networks CNS3xxx"
depends on ARCH_CNS3XXX
select DEBUG_UART_8250
help
@@ -277,7 +277,7 @@ choice
their output to the CNS3xxx UART0.
config DEBUG_DAVINCI_DA8XX_UART1
- bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
+ bool "DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
select DEBUG_UART_8250
help
@@ -285,7 +285,7 @@ choice
their output to UART1 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DA8XX_UART2
- bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
+ bool "DaVinci DA8XX using UART2"
depends on ARCH_DAVINCI_DA8XX
select DEBUG_UART_8250
help
@@ -293,7 +293,7 @@ choice
their output to UART2 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DMx_UART0
- bool "Kernel low-level debugging on DaVinci DMx using UART0"
+ bool "DaVinci DMx using UART0"
depends on ARCH_DAVINCI_DMx
select DEBUG_UART_8250
help
@@ -301,21 +301,21 @@ choice
their output to UART0 serial port on DaVinci DMx devices.
config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
+ bool "footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_DIGICOLOR_UA0
- bool "Kernel low-level debugging messages via Digicolor UA0"
+ bool "Digicolor UA0"
depends on ARCH_DIGICOLOR
help
Say Y here if you want the debug print routines to direct
their output to the UA0 serial port in the CX92755.
config DEBUG_EP93XX
- bool "Kernel low-level debugging messages via ep93xx UART"
+ bool "ep93xx UART"
depends on ARCH_EP93XX
select DEBUG_UART_PL01X
help
@@ -323,7 +323,7 @@ choice
on Cirrus Logic EP93xx based platforms.
config DEBUG_FOOTBRIDGE_COM1
- bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ bool "footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
select DEBUG_UART_8250
help
@@ -331,7 +331,7 @@ choice
their output to the 8250 at PCI COM1.
config DEBUG_GEMINI
- bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+ bool "Cortina Systems Gemini UART"
depends on ARCH_GEMINI
select DEBUG_UART_8250
help
@@ -347,7 +347,7 @@ choice
on HI3620 UART.
config DEBUG_HIGHBANK_UART
- bool "Kernel low-level debugging messages via Highbank UART"
+ bool "Highbank UART"
depends on ARCH_HIGHBANK
select DEBUG_UART_PL01X
help
@@ -486,7 +486,7 @@ choice
on i.MX7D.
config DEBUG_INTEGRATOR
- bool "Kernel low-level debugging messages via ARM Integrator UART"
+ bool "ARM Integrator UART"
depends on ARCH_INTEGRATOR
select DEBUG_UART_PL01X
help
@@ -494,7 +494,7 @@ choice
on ARM Integrator platforms.
config DEBUG_KEYSTONE_UART0
- bool "Kernel low-level debugging on KEYSTONE2 using UART0"
+ bool "KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
select DEBUG_UART_8250
help
@@ -502,7 +502,7 @@ choice
their output to UART0 serial port on KEYSTONE2 devices.
config DEBUG_KEYSTONE_UART1
- bool "Kernel low-level debugging on KEYSTONE2 using UART1"
+ bool "KEYSTONE2 using UART1"
depends on ARCH_KEYSTONE
select DEBUG_UART_8250
help
@@ -517,7 +517,7 @@ choice
on KS8695.
config DEBUG_LPC18XX_UART0
- bool "Kernel low-level debugging via LPC18xx/43xx UART0"
+ bool "LPC18xx/43xx UART0"
depends on ARCH_LPC18XX
select DEBUG_UART_8250
help
@@ -525,7 +525,7 @@ choice
on NXP LPC18xx/43xx UART0.
config DEBUG_LPC32XX
- bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+ bool "NXP LPC32xx UART"
depends on ARCH_LPC32XX
select DEBUG_UART_8250
help
@@ -533,14 +533,14 @@ choice
on NXP LPC32xx based platforms.
config DEBUG_MESON_UARTAO
- bool "Kernel low-level debugging via Meson6 UARTAO"
+ bool "Meson6 UARTAO"
depends on ARCH_MESON
help
Say Y here if you want kernel low-lever debugging support
on Amlogic Meson6 based platforms on the UARTAO.
config DEBUG_MMP_UART2
- bool "Kernel low-level debugging message via MMP UART2"
+ bool "MMP UART2"
depends on ARCH_MMP
select DEBUG_UART_8250
help
@@ -548,7 +548,7 @@ choice
on MMP UART2.
config DEBUG_MMP_UART3
- bool "Kernel low-level debugging message via MMP UART3"
+ bool "MMP UART3"
depends on ARCH_MMP
select DEBUG_UART_8250
help
@@ -556,7 +556,7 @@ choice
on MMP UART3.
config DEBUG_MVEBU_UART0
- bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
+ bool "MVEBU UART0 (old bootloaders)"
depends on ARCH_MVEBU
depends on ARCH_MVEBU && CPU_V7
select DEBUG_UART_8250
@@ -580,7 +580,7 @@ choice
silently crashes, with no serial output at all.
config DEBUG_MVEBU_UART0_ALTERNATE
- bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
+ bool "MVEBU UART0 (new bootloaders)"
depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
select DEBUG_UART_8250
help
@@ -597,7 +597,7 @@ choice
silently crashes, with no serial output at all.
config DEBUG_MVEBU_UART1_ALTERNATE
- bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
+ bool "MVEBU UART1 (new bootloaders)"
depends on ARCH_MVEBU
select DEBUG_UART_8250
help
@@ -639,14 +639,14 @@ choice
for Mediatek mt8135 based platforms on UART3.
config DEBUG_NETX_UART
- bool "Kernel low-level debugging messages via NetX UART"
+ bool "NetX UART"
depends on ARCH_NETX
help
Say Y here if you want kernel low-level debugging support
- on Hilscher NetX based platforms.
+ on Hilscher NetX based platforms.r
config DEBUG_NOMADIK_UART
- bool "Kernel low-level debugging messages via NOMADIK UART"
+ bool "NOMADIK UART"
depends on ARCH_NOMADIK
select DEBUG_UART_PL01X
help
@@ -654,7 +654,7 @@ choice
on NOMADIK based platforms.
config DEBUG_NSPIRE_CLASSIC_UART
- bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
+ bool "TI-NSPIRE 8250 UART"
depends on ARCH_NSPIRE
select DEBUG_UART_8250
help
@@ -662,7 +662,7 @@ choice
on TI-NSPIRE classic models.
config DEBUG_NSPIRE_CX_UART
- bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
+ bool "TI-NSPIRE PL011 UART"
depends on ARCH_NSPIRE
select DEBUG_UART_PL01X
help
@@ -670,7 +670,7 @@ choice
on TI-NSPIRE CX models.
config DEBUG_OMAP1UART1
- bool "Kernel low-level debugging via OMAP1 UART1"
+ bool "OMAP1 UART1"
depends on ARCH_OMAP1
select DEBUG_UART_8250
help
@@ -678,7 +678,7 @@ choice
on OMAP1 based platforms (except OMAP730) on the UART1.
config DEBUG_OMAP1UART2
- bool "Kernel low-level debugging via OMAP1 UART2"
+ bool "OMAP1 UART2"
depends on ARCH_OMAP1
select DEBUG_UART_8250
help
@@ -686,7 +686,7 @@ choice
on OMAP1 based platforms (except OMAP730) on the UART2.
config DEBUG_OMAP1UART3
- bool "Kernel low-level debugging via OMAP1 UART3"
+ bool "OMAP1 UART3"
depends on ARCH_OMAP1
select DEBUG_UART_8250
help
@@ -702,17 +702,17 @@ choice
omap3 torpedo and 3530 lv som.
config DEBUG_OMAP2UART2
- bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
+ bool "OMAP2/3/4 UART2"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_OMAP2UART3
- bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
+ bool "OMAP2 UART3 (n8x0)"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_OMAP3UART3
- bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
+ bool "OMAP3 UART3 (most omap3 boards)"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
help
@@ -721,22 +721,22 @@ choice
and 3517evm.
config DEBUG_OMAP4UART3
- bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+ bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_OMAP3UART4
- bool "Kernel low-level debugging messages via OMAP36XX UART4"
+ bool "OMAP36XX UART4"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_OMAP4UART4
- bool "Kernel low-level debugging messages via OMAP4/5 UART4"
+ bool "OMAP4/5 UART4"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_OMAP7XXUART1
- bool "Kernel low-level debugging via OMAP730 UART1"
+ bool "OMAP730 UART1"
depends on ARCH_OMAP730
select DEBUG_UART_8250
help
@@ -744,7 +744,7 @@ choice
on OMAP730 based platforms on the UART1.
config DEBUG_OMAP7XXUART2
- bool "Kernel low-level debugging via OMAP730 UART2"
+ bool "OMAP730 UART2"
depends on ARCH_OMAP730
select DEBUG_UART_8250
help
@@ -752,7 +752,7 @@ choice
on OMAP730 based platforms on the UART2.
config DEBUG_OMAP7XXUART3
- bool "Kernel low-level debugging via OMAP730 UART3"
+ bool "OMAP730 UART3"
depends on ARCH_OMAP730
select DEBUG_UART_8250
help
@@ -760,33 +760,33 @@ choice
on OMAP730 based platforms on the UART3.
config DEBUG_TI81XXUART1
- bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
+ bool "TI81XX UART1 (ti8148evm)"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_TI81XXUART2
- bool "Kernel low-level debugging messages via TI81XX UART2"
+ bool "TI81XX UART2"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_TI81XXUART3
- bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
+ bool "TI81XX UART3 (ti8168evm)"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_AM33XXUART1
- bool "Kernel low-level debugging messages via AM33XX UART1"
+ bool "AM33XX UART1"
depends on ARCH_OMAP2PLUS
select DEBUG_UART_8250
config DEBUG_ZOOM_UART
- bool "Kernel low-level debugging messages via Zoom2/3 UART"
+ bool "Zoom2/3 UART"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
- bool "Use PicoXcell UART for low-level debug"
+ bool "PicoXcell UART"
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
@@ -794,14 +794,14 @@ choice
config DEBUG_PXA_UART1
depends on ARCH_PXA
- bool "Use PXA UART1 for low-level debug"
+ bool "PXA UART1"
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on PXA UART1.
config DEBUG_QCOM_UARTDM
- bool "Kernel low-level debugging messages via QCOM UARTDM"
+ bool "QCOM UARTDM"
depends on ARCH_QCOM
help
Say Y here if you want the debug print routines to direct
@@ -837,7 +837,7 @@ choice
PB1176 platform.
config DEBUG_RV1108_UART0
- bool "Kernel low-level debugging messages via Rockchip RV1108 UART0"
+ bool "Rockchip RV1108 UART0"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -845,7 +845,7 @@ choice
on Rockchip RV1108 based platforms.
config DEBUG_RV1108_UART1
- bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
+ bool "Rockchip RV1108 UART1"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -853,7 +853,7 @@ choice
on Rockchip RV1108 based platforms.
config DEBUG_RV1108_UART2
- bool "Kernel low-level debugging messages via Rockchip RV1108 UART2"
+ bool "Rockchip RV1108 UART2"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -861,7 +861,7 @@ choice
on Rockchip RV1108 based platforms.
config DEBUG_RK29_UART0
- bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
+ bool "Rockchip RK29 UART0"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -869,7 +869,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK29_UART1
- bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
+ bool "Rockchip RK29 UART1"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -877,7 +877,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK29_UART2
- bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
+ bool "Rockchip RK29 UART2"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -885,7 +885,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK3X_UART0
- bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
+ bool "Rockchip RK30/RK31 UART0"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -893,7 +893,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK3X_UART1
- bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
+ bool "Rockchip RK30/RK31 UART1"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -901,7 +901,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK3X_UART2
- bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
+ bool "Rockchip RK30/RK31 UART2"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -909,7 +909,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK3X_UART3
- bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
+ bool "Rockchip RK30/RK31 UART3"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -917,7 +917,7 @@ choice
on Rockchip based platforms.
config DEBUG_RK32_UART2
- bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
+ bool "Rockchip RK32 UART2"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -925,28 +925,28 @@ choice
on Rockchip RK32xx based platforms.
config DEBUG_R7S72100_SCIF2
- bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
+ bool "SCIF2 on R7S72100"
depends on ARCH_R7S72100
help
Say Y here if you want kernel low-level debugging support
via SCIF2 on Renesas RZ/A1H (R7S72100).
config DEBUG_RCAR_GEN1_SCIF0
- bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
+ bool "SCIF0 on R8A7778"
depends on ARCH_R8A7778
help
Say Y here if you want kernel low-level debugging support
via SCIF0 on Renesas R-Car M1A (R8A7778).
config DEBUG_RCAR_GEN1_SCIF2
- bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
+ bool "SCIF2 on R8A7779"
depends on ARCH_R8A7779
help
Say Y here if you want kernel low-level debugging support
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
- bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
+ bool "SCIF0 on R-Car Gen2 and RZ/G1"
depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
help
@@ -956,42 +956,42 @@ choice
M2-N (R8A7793).
config DEBUG_RCAR_GEN2_SCIF1
- bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
+ bool "SCIF1 on R8A77470"
depends on ARCH_R8A77470
help
Say Y here if you want kernel low-level debugging support
via SCIF1 on Renesas RZ/G1C (R8A77470).
config DEBUG_RCAR_GEN2_SCIF2
- bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
+ bool "SCIF2 on R8A7794"
depends on ARCH_R8A7794
help
Say Y here if you want kernel low-level debugging support
via SCIF2 on Renesas R-Car E2 (R8A7794).
config DEBUG_RCAR_GEN2_SCIF4
- bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+ bool "SCIF4 on R8A7745"
depends on ARCH_R8A7745
help
Say Y here if you want kernel low-level debugging support
via SCIF4 on Renesas RZ/G1E (R8A7745).
config DEBUG_RMOBILE_SCIFA0
- bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
+ bool "SCIFA0 on R8A73A4"
depends on ARCH_R8A73A4
help
Say Y here if you want kernel low-level debugging support
via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
config DEBUG_RMOBILE_SCIFA1
- bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
+ bool "SCIFA1 on R8A7740"
depends on ARCH_R8A7740
help
Say Y here if you want kernel low-level debugging support
via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
config DEBUG_RMOBILE_SCIFA4
- bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
+ bool "SCIFA4 on SH73A0"
depends on ARCH_SH73A0
help
Say Y here if you want kernel low-level debugging support
@@ -1104,7 +1104,7 @@ choice
on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
config DEBUG_SUN9I_UART0
- bool "Kernel low-level debugging messages via sun9i UART0"
+ bool "sun9i UART0"
depends on MACH_SUN9I
select DEBUG_UART_8250
help
@@ -1112,7 +1112,7 @@ choice
on Allwinner A80 based platforms on the UART0.
config DEBUG_SUNXI_UART0
- bool "Kernel low-level debugging messages via sunXi UART0"
+ bool "sunXi UART0"
depends on ARCH_SUNXI
select DEBUG_UART_8250
help
@@ -1120,7 +1120,7 @@ choice
on Allwinner A1X based platforms on the UART0.
config DEBUG_SUNXI_UART1
- bool "Kernel low-level debugging messages via sunXi UART1"
+ bool "sunXi UART1"
depends on ARCH_SUNXI
select DEBUG_UART_8250
help
@@ -1128,7 +1128,7 @@ choice
on Allwinner A1X based platforms on the UART1.
config DEBUG_SUNXI_R_UART
- bool "Kernel low-level debugging messages via sunXi R_UART"
+ bool "sunXi R_UART"
depends on MACH_SUN6I || MACH_SUN8I
select DEBUG_UART_8250
help
@@ -1136,7 +1136,7 @@ choice
on Allwinner A31/A23 based platforms on the R_UART.
config DEBUG_SIRFPRIMA2_UART1
- bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+ bool "SiRFprimaII UART1"
depends on ARCH_PRIMA2
select DEBUG_SIRFSOC_UART
help
@@ -1144,7 +1144,7 @@ choice
their output to the uart1 port on SiRFprimaII devices.
config DEBUG_SIRFATLAS7_UART0
- bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
+ bool "SiRFatlas7 UART0"
depends on ARCH_ATLAS7
select DEBUG_SIRFSOC_UART
help
@@ -1154,7 +1154,7 @@ choice
debug port can be very useful.
config DEBUG_SIRFATLAS7_UART1
- bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
+ bool "SiRFatlas7 UART1"
depends on ARCH_ATLAS7
select DEBUG_SIRFSOC_UART
help
@@ -1162,7 +1162,7 @@ choice
their output to the uart1 port on SiRFATLAS7 devices.
config DEBUG_SPEAR3XX
- bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+ bool "ST SPEAr 3xx/6xx UART"
depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
select DEBUG_UART_PL01X
help
@@ -1170,7 +1170,7 @@ choice
on ST SPEAr based platforms.
config DEBUG_SPEAR13XX
- bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+ bool "ST SPEAr 13xx UART"
depends on ARCH_SPEAR13XX
select DEBUG_UART_PL01X
help
@@ -1178,7 +1178,7 @@ choice
on ST SPEAr13xx based platforms.
config STIH41X_DEBUG_ASC2
- bool "Use StiH415/416 ASC2 UART for low-level debug"
+ bool "StiH415/416 ASC2 UART"
depends on ARCH_STI
select DEBUG_STI_UART
help
@@ -1189,7 +1189,7 @@ choice
If unsure, say N.
config STIH41X_DEBUG_SBC_ASC1
- bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+ bool "StiH415/416 SBC ASC1 UART"
depends on ARCH_STI
select DEBUG_STI_UART
help
@@ -1200,7 +1200,7 @@ choice
If unsure, say N.
config STM32F4_DEBUG_UART
- bool "Use STM32F4 UART for low-level debug"
+ bool "STM32F4 UART"
depends on ARCH_STM32
select DEBUG_STM32_UART
help
@@ -1211,7 +1211,7 @@ choice
If unsure, say N.
config STM32F7_DEBUG_UART
- bool "Use STM32F7 UART for low-level debug"
+ bool "STM32F7 UART"
depends on ARCH_STM32
select DEBUG_STM32_UART
help
@@ -1222,7 +1222,7 @@ choice
If unsure, say N.
config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
+ bool "Tegra UART via ODMDATA"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
@@ -1234,7 +1234,7 @@ choice
are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
- bool "Kernel low-level debugging messages via Tegra UART A"
+ bool "Tegra UART A"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
@@ -1242,7 +1242,7 @@ choice
on Tegra based platforms.
config TEGRA_DEBUG_UARTB
- bool "Kernel low-level debugging messages via Tegra UART B"
+ bool "Tegra UART B"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
@@ -1250,7 +1250,7 @@ choice
on Tegra based platforms.
config TEGRA_DEBUG_UARTC
- bool "Kernel low-level debugging messages via Tegra UART C"
+ bool "Tegra UART C"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
@@ -1258,7 +1258,7 @@ choice
on Tegra based platforms.
config TEGRA_DEBUG_UARTD
- bool "Kernel low-level debugging messages via Tegra UART D"
+ bool "Tegra UART D"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
@@ -1266,7 +1266,7 @@ choice
on Tegra based platforms.
config TEGRA_DEBUG_UARTE
- bool "Kernel low-level debugging messages via Tegra UART E"
+ bool "Tegra UART E"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
@@ -1274,7 +1274,7 @@ choice
on Tegra based platforms.
config DEBUG_U300_UART
- bool "Kernel low-level debugging messages via U300 UART0"
+ bool "U300 UART0"
depends on ARCH_U300
select DEBUG_UART_PL01X
help
@@ -1289,7 +1289,7 @@ choice
on Ux500 based platforms.
config DEBUG_VERSATILE
- bool "Kernel low-level debugging messages via ARM Versatile UART"
+ bool "ARM Versatile UART"
depends on ARCH_VERSATILE
select DEBUG_UART_PL01X
help
@@ -1316,7 +1316,7 @@ choice
this applies only to the V2P-CA9 tile.
config DEBUG_VEXPRESS_UART0_RS1
- bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
+ bool "PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
depends on ARCH_VEXPRESS
select DEBUG_UART_PL01X
help
@@ -1340,14 +1340,14 @@ choice
on Vybrid based platforms.
config DEBUG_VT8500_UART0
- bool "Use UART0 on VIA/Wondermedia SoCs"
+ bool "UART0 on VIA/Wondermedia SoCs"
depends on ARCH_VT8500
help
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
config DEBUG_ZTE_ZX
- bool "Use ZTE ZX UART"
+ bool "ZTE ZX UART"
select DEBUG_UART_PL01X
depends on ARCH_ZX
help
@@ -1359,14 +1359,14 @@ choice
and will be soon removed.
config DEBUG_ZYNQ_UART0
- bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+ bool "Xilinx Zynq using UART0"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART0 on the Zynq platform.
config DEBUG_ZYNQ_UART1
- bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+ bool "Xilinx Zynq using UART1"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
@@ -1376,7 +1376,7 @@ choice
appear on the USB serial adaptor, select this option.
config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ bool "EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
@@ -1403,7 +1403,7 @@ choice
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
config DEBUG_LL_UART_8250
- bool "Kernel low-level debugging via 8250 UART"
+ bool "8250 UART"
help
Say Y here if you wish the debug print routes to direct
their output to an 8250 UART. You can use this option
@@ -1416,7 +1416,7 @@ choice
and will be soon removed.
config DEBUG_LL_UART_EFM32
- bool "Kernel low-level debugging via efm32 UART"
+ bool "efm32 UART"
depends on ARCH_EFM32
help
Say Y here if you want the debug print routines to direct
@@ -1430,7 +1430,7 @@ choice
0x4000e400 | UART1
config DEBUG_LL_UART_PL01X
- bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
+ bool "ARM Ltd PL01x Primecell UART"
help
Say Y here if you wish the debug print routes to direct
their output to a PL01x Primecell UART. You can use
The choice "Kernel low-level debugging port" is already descriptive and the choices under it have very differing messages. Make these easier to read and more uniform. It also makes it easier to read in menuconfig. - Remove the "Kernel low-level debugging on " prefixes - Remove the "Kernel low-level debugging via " prefixes - Remove the "Kernel low-level debugging message via " prefixes - Remove the "Kernel low-level debugging messages via " prefixes - Remove the "for low-level debug" suffixes - Remove "Use" prefixes Signed-off-by: Ben Dooks <ben-linux@fluff.org> --- arch/arm/Kconfig.debug | 226 ++++++++++++++++++++--------------------- 1 file changed, 113 insertions(+), 113 deletions(-)