diff mbox series

[v2,2/5] nvmem: imx-ocotp: Ensure WAIT bits are preserved when setting timing

Message ID 20190419164808.23236-3-pure.logic@nexus-software.ie (mailing list archive)
State New, archived
Headers show
Series Add i.MX8MM support | expand

Commit Message

Bryan O'Donoghue April 19, 2019, 4:48 p.m. UTC 
The i.MX6 and i.MX8 both have a bit-field spanning bits 27:22 called the
WAIT field.

The WAIT field according to the documentation for both parts "specifies
time interval between auto read and write access in one time program. It is
given in number of ipg_clk periods."

This patch ensures that the relevant field is read and written back to the
timing register.

Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
---
 drivers/nvmem/imx-ocotp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 6600c4ddeb51..85a7d0da3abb 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -189,7 +189,8 @@  static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
 	strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
 	strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
 
-	timing = strobe_prog & 0x00000FFF;
+	timing = readl(priv->base + IMX_OCOTP_ADDR_TIMING) & 0x0FC00000;
+	timing |= strobe_prog & 0x00000FFF;
 	timing |= (relax       << 12) & 0x0000F000;
 	timing |= (strobe_read << 16) & 0x003F0000;