diff mbox series

[v2,7/9] dpaa_eth: fix iova handling for contiguous frames

Message ID 20190427071031.6563-8-laurentiu.tudor@nxp.com (mailing list archive)
State New, archived
Headers show
Series Prerequisites for NXP LS104xA SMMU enablement | expand

Commit Message

Laurentiu Tudor April 27, 2019, 7:10 a.m. UTC
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

The driver relies on the no longer valid assumption that dma addresses
(iovas) are identical to physical addressees and uses phys_to_virt() to
make iova -> vaddr conversions. Fix this by adding a function that does
proper iova -> phys conversions using the iommu api and update the code
to use it.
Also, a dma_unmap_single() call had to be moved further down the code
because iova -> vaddr conversions were required before the unmap.
For now only the contiguous frame case is handled and the SG case is
split in a following patch.
While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
as parameter.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 44 ++++++++++---------
 1 file changed, 24 insertions(+), 20 deletions(-)

Comments

Christoph Hellwig April 27, 2019, 4:46 p.m. UTC | #1
On Sat, Apr 27, 2019 at 10:10:29AM +0300, laurentiu.tudor@nxp.com wrote:
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> The driver relies on the no longer valid assumption that dma addresses
> (iovas) are identical to physical addressees and uses phys_to_virt() to
> make iova -> vaddr conversions. Fix this by adding a function that does
> proper iova -> phys conversions using the iommu api and update the code
> to use it.
> Also, a dma_unmap_single() call had to be moved further down the code
> because iova -> vaddr conversions were required before the unmap.
> For now only the contiguous frame case is handled and the SG case is
> split in a following patch.
> While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
> as parameter.

Err, this is broken.  A driver using the DMA API has no business
call IOMMU APIs.  Just save the _virtual_ address used for the mapping
away and use that again.  We should not go through crazy gymnastics
like this.
Laurentiu Tudor May 2, 2019, 9:10 a.m. UTC | #2
> -----Original Message-----
> From: Christoph Hellwig <hch@infradead.org>
> Sent: Saturday, April 27, 2019 7:46 PM
> 
> On Sat, Apr 27, 2019 at 10:10:29AM +0300, laurentiu.tudor@nxp.com wrote:
> > From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >
> > The driver relies on the no longer valid assumption that dma addresses
> > (iovas) are identical to physical addressees and uses phys_to_virt() to
> > make iova -> vaddr conversions. Fix this by adding a function that does
> > proper iova -> phys conversions using the iommu api and update the code
> > to use it.
> > Also, a dma_unmap_single() call had to be moved further down the code
> > because iova -> vaddr conversions were required before the unmap.
> > For now only the contiguous frame case is handled and the SG case is
> > split in a following patch.
> > While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
> > as parameter.
> 
> Err, this is broken.  A driver using the DMA API has no business
> call IOMMU APIs.  Just save the _virtual_ address used for the mapping
> away and use that again.  We should not go through crazy gymnastics
> like this.

I think that due to the particularity of this hardware we don't have a way of saving the VA, but I'd let my colleagues maintaining this driver to comment more on why we need to do this.

---
Best Regards, Laurentiu
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index cdc7e6d83f77..f17edc80dc37 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -50,6 +50,7 @@ 
 #include <linux/highmem.h>
 #include <linux/percpu.h>
 #include <linux/dma-mapping.h>
+#include <linux/iommu.h>
 #include <linux/sort.h>
 #include <linux/phy_fixed.h>
 #include <soc/fsl/bman.h>
@@ -1595,6 +1596,17 @@  static int dpaa_eth_refill_bpools(struct dpaa_priv *priv)
 	return 0;
 }
 
+static phys_addr_t dpaa_iova_to_phys(struct device *dev, dma_addr_t addr)
+{
+	struct iommu_domain *domain;
+
+	domain = iommu_get_domain_for_dev(dev);
+	if (domain)
+		return iommu_iova_to_phys(domain, addr);
+	else
+		return addr;
+}
+
 /* Cleanup function for outgoing frame descriptors that were built on Tx path,
  * either contiguous frames or scatter/gather ones.
  * Skb freeing is not handled here.
@@ -1617,7 +1629,7 @@  static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 	int nr_frags, i;
 	u64 ns;
 
-	skbh = (struct sk_buff **)phys_to_virt(addr);
+	skbh = (struct sk_buff **)phys_to_virt(dpaa_iova_to_phys(dev, addr));
 	skb = *skbh;
 
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
@@ -1687,25 +1699,21 @@  static u8 rx_csum_offload(const struct dpaa_priv *priv, const struct qm_fd *fd)
  * accommodate the shared info area of the skb.
  */
 static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
-					const struct qm_fd *fd)
+					const struct qm_fd *fd,
+					struct dpaa_bp *dpaa_bp,
+					void *vaddr)
 {
 	ssize_t fd_off = qm_fd_get_offset(fd);
-	dma_addr_t addr = qm_fd_addr(fd);
-	struct dpaa_bp *dpaa_bp;
 	struct sk_buff *skb;
-	void *vaddr;
 
-	vaddr = phys_to_virt(addr);
 	WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
 
-	dpaa_bp = dpaa_bpid2pool(fd->bpid);
-	if (!dpaa_bp)
-		goto free_buffer;
-
 	skb = build_skb(vaddr, dpaa_bp->size +
 			SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
-	if (WARN_ONCE(!skb, "Build skb failure on Rx\n"))
-		goto free_buffer;
+	if (WARN_ONCE(!skb, "Build skb failure on Rx\n")) {
+		skb_free_frag(vaddr);
+		return NULL;
+	}
 	WARN_ON(fd_off != priv->rx_headroom);
 	skb_reserve(skb, fd_off);
 	skb_put(skb, qm_fd_get_length(fd));
@@ -1713,10 +1721,6 @@  static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
 	skb->ip_summed = rx_csum_offload(priv, fd);
 
 	return skb;
-
-free_buffer:
-	skb_free_frag(vaddr);
-	return NULL;
 }
 
 /* Build an skb with the data of the first S/G entry in the linear portion and
@@ -2309,12 +2313,12 @@  static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	if (!dpaa_bp)
 		return qman_cb_dqrr_consume;
 
-	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
-
 	/* prefetch the first 64 bytes of the frame or the SGT start */
-	vaddr = phys_to_virt(addr);
+	vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev, addr));
 	prefetch(vaddr + qm_fd_get_offset(fd));
 
+	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
+
 	/* The only FD types that we may receive are contig and S/G */
 	WARN_ON((fd_format != qm_fd_contig) && (fd_format != qm_fd_sg));
 
@@ -2325,7 +2329,7 @@  static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	(*count_ptr)--;
 
 	if (likely(fd_format == qm_fd_contig))
-		skb = contig_fd_to_skb(priv, fd);
+		skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr);
 	else
 		skb = sg_fd_to_skb(priv, fd);
 	if (!skb)