diff mbox series

[v2] arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64

Message ID 20190503094720.21502-1-icenowy@aosc.io (mailing list archive)
State New, archived
Headers show
Series [v2] arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64 | expand

Commit Message

Icenowy Zheng May 3, 2019, 9:47 a.m. UTC 
The Allwinner H6 SoC features tweakable VCC for PC, PD, PG, PL and PM
banks.

This patch adds supplies for these banks except PL bank. PL bank is
where PMIC is attached, and currently if a PMIC regulator is added
for it a dependency loop will happen.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v2:
- Added PG/PM banks.

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Maxime Ripard May 3, 2019, 2:41 p.m. UTC | #1 
On Fri, May 03, 2019 at 05:47:20PM +0800, Icenowy Zheng wrote:
> The Allwinner H6 SoC features tweakable VCC for PC, PD, PG, PL and PM
> banks.
>
> This patch adds supplies for these banks except PL bank. PL bank is
> where PMIC is attached, and currently if a PMIC regulator is added
> for it a dependency loop will happen.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Applied for 5.3, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 4802902e128f..9e464d40cbff 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -127,6 +127,12 @@ 
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
 &r_i2c {
 	status = "okay";
 
@@ -247,6 +253,10 @@ 
 	};
 };
 
+&r_pio {
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;