[v10,2/4] arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit

Message ID	20190513174057.4410-3-angus@akkea.ca (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: "Angus Ainslie (Purism)" <angus@akkea.ca> To: angus.ainslie@puri.sm Subject: [PATCH v10 2/4] arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit Date: Mon, 13 May 2019 10:40:55 -0700 Message-Id: <20190513174057.4410-3-angus@akkea.ca> In-Reply-To: <20190513174057.4410-1-angus@akkea.ca> References: <20190513174057.4410-1-angus@akkea.ca> Precedence: list Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, Sascha Hauer <s.hauer@pengutronix.de>, "Angus Ainslie \(Purism\)" <angus@akkea.ca>, linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	Add support for the Purism Librem5 devkit \| expand [v10,0/4] Add support for the Purism Librem5 devkit [v10,1/4] MAINTAINERS: add an entry for for arm64 imx devicetrees [v10,2/4] arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit [v10,3/4] dt-bindings: Add an entry for Purism SPC [v10,4/4] dt-bindings: arm: fsl: Add the imx8mq boards

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0bd122f60549..c043aca66572 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts new file mode 100644 index 000000000000..64898daee644 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -0,0 +1,821 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 Purism SPC + */ + +/dts-v1/; + +#include "dt-bindings/input/input.h" +#include "dt-bindings/usb/pd.h" +#include "imx8mq.dtsi" + +/ { + model = "Purism Librem 5 devkit"; + compatible = "purism,librem5-devkit", "fsl,imx8mq"; + + backlight_dsi: backlight-dsi { + compatible = "pwm-backlight"; + /* 200 Hz for the PAM2841 */ + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + /* Default brightness level (index into the array defined by */ + /* the "brightness-levels" property) */ + default-brightness-level = <0>; + power-supply = <&reg_22v4_p>; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + btn1 { + label = "VOL_UP"; + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEUP>; + }; + + btn2 { + label = "VOL_DOWN"; + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEDOWN>; + }; + + hp_det { + label = "HP_DET"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_HP>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "LED 1"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pmic_osc: pmic-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + pwmleds { + compatible = "pwm-leds"; + + haptic { + label = "librem5::haptic"; + pwms = <&pwm2 0 200000>; + active-low; + max-brightness = <255>; + power-supply = <&reg_3v3_p>; + }; + }; + + reg_1v8_p: regulator-1v8-p { + compatible = "regulator-fixed"; + regulator-name = "1v8_p"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&reg_pwr_en>; + }; + + reg_2v8_p: regulator-2v8-p { + compatible = "regulator-fixed"; + regulator-name = "2v8_p"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&reg_pwr_en>; + }; + + reg_3v3_p: regulator-3v3-p { + compatible = "regulator-fixed"; + regulator-name = "3v3_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&reg_pwr_en>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_5v_p: regulator-5v-p { + compatible = "regulator-fixed"; + regulator-name = "5v_p"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&reg_pwr_en>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_22v4_p: regulator-22v4-p { + compatible = "regulator-fixed"; + regulator-name = "22v4_P"; + regulator-min-microvolt = <22400000>; + regulator-max-microvolt = <22400000>; + vin-supply = <&reg_pwr_en>; + }; + + reg_pwr_en: regulator-pwr-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwr_en>; + regulator-name = "PWR_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + wifi_pwr_en: wifi-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-name = "WIFI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&clk { + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; + assigned-clock-rates = <786432000>, <722534400>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <&ethphy0>; + fsl,magic-packet; + phy-supply = <&reg_3v3_p>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + rohm,reset-snvs-powered; + + regulators { + + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + typec_ptn5100: usb_typec@52 { + compatible = "nxp,ptn5110"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP )>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP ) + PDO_VAR(5000, 12000, 2000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; + }; + }; + }; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + }; + + charger@6b { /* bq25896 */ + compatible = "ti,bq25890"; + reg = <0x6b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger>; + interrupt-parent = <&gpio3>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + ti,battery-regulation-voltage = <4192000>; /* 4.192V */ + ti,charge-current = <1600000>; /* 1.6 A */ + ti,termination-current = <66000>; /* 66mA */ + ti,precharge-current = <1300000>; /* 1.3A */ + ti,minimum-sys-voltage = <2750000>; /* 2.75V */ + ti,boost-voltage = <5000000>; /* 5V */ + ti,boost-max-current = <50000>; /* 50mA */ + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + magnetometer@1e { + compatible = "st,lsm9ds1-magn"; + reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&reg_3v3_p>; + vddio-supply = <&reg_3v3_p>; + }; + + touchscreen@5d { + compatible = "goodix,gt5688"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_ts>; + interrupt-parent = <&gpio3>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + AVDD28-supply = <&reg_2v8_p>; + VDDIO-supply = <&reg_1v8_p>; + }; +}; + +&iomuxc { + pinctrl_backlight: pwm1 { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */ + >; + }; + + pinctrl_bt: btgrp { + fsl,pins = < + /* nBT_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 + /* BT_HOST_WAKE */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 + >; + }; + + pinctrl_charger: chargernirq { + fsl,pins = < + /* CHRG_nINT */ + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + + pinctrl_goodix_ts: gt5688 { + fsl,pins = < + /* TOUCH INT */ + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 + /* TOUCH RST */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 + >; + }; + + pinctrl_gpio_leds: gpioleds { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16 + >; + }; + + pinctrl_gpio_keys: gpiokeys { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 + /* HP_DET */ + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 + >; + }; + + pinctrl_haptic: hapticgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT 0xc6 /* nHAPTIC */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f + >; + }; + + pinctrl_imu: imugrp { + fsl,pins = < + /* IMU_INT */ + MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 + >; + }; + + pinctrl_pmic: pmicint { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 + >; + }; + + pinctrl_pwr_en: pwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06 + >; + }; + + pinctrl_rtc: rtcirq { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 + MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_pwr: usdhc2grppwr { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + /* WIFI_WAKE */ + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06 + >; + }; + + pinctrl_wwan: wwangrp { + fsl,pins = < + /* nWWAN_DISABLE */ + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 + /* nWoWWAN */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 + /* WWAN_RESET */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_haptic>; + status = "okay"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { /* GNSS */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <&reg_5v_p>; + status = "okay"; +}; + +&usb_dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "otg"; + status = "okay"; + + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <&reg_usdhc2_vmmc>; + power-supply = <&wifi_pwr_en>; + non-removable; + disable-wp; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};

[v10,2/4] arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit

Commit Message

Patch