diff mbox series

[V2,7/8] ARM: dts: imx53: Add GPIO line names on M53Menlo

Message ID 20190515224601.4527-7-marex@denx.de (mailing list archive)
State New, archived
Headers show
Series [V2,1/8] ARM: dts: imx53: Update UART configuration on M53Menlo | expand

Commit Message

Marek Vasut May 15, 2019, 10:46 p.m. UTC 
Add meaningful GPIO line names for the board GPIOs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
---
V2: No change
---
 arch/arm/boot/dts/imx53-m53menlo.dts | 72 ++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 39a76a5bbd19..a106233d1651 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -116,6 +116,78 @@ 
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"TestPin_SV2_3", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+		"", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "CPLD_JTAG_TCK", "KBD_intK",
+		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "",
+		"CPLD_reset", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "USB-OTG_OverCurrent", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;