diff mbox series

[v2,5/5] ARM: dts: meson8b: add the canvas module

Message ID 20190520194353.24445-6-martin.blumenstingl@googlemail.com (mailing list archive)
State New, archived
Headers show
Series 32-bit Meson: add the canvas module | expand

Commit Message

Martin Blumenstingl May 20, 2019, 7:43 p.m. UTC 
Add the canvas module to Meson8b because it's required for the VPU
(video output) and video decoders.

The canvas module is located inside the "DMC bus" (where also some of
the memory controller registers are located). The "DMC bus" itself is
part of the so-called "MMC bus".

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm/boot/dts/meson8b.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index ec67f49116d9..e4134c63a48c 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -205,6 +205,28 @@ 
 		};
 	};
 
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,meson8b-canvas",
+					     "amlogic,canvas";
+				reg = <0x48 0x14>;
+			};
+		};
+	};
+
 	apb: bus@d0000000 {
 		compatible = "simple-bus";
 		reg = <0xd0000000 0x200000>;