@@ -70,6 +70,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -206,6 +211,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -58,6 +58,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
@@ -165,6 +170,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -55,6 +55,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -163,6 +168,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -85,6 +85,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -215,6 +220,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
Enable and add supply to the Mali GPU node on all the H6 boards. Regarding the datasheet the maximum time for supply to reach its voltage is 32ms. Signed-off-by: Clément Péron <peron.clem@gmail.com> --- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 6 ++++++ 4 files changed, 24 insertions(+)