| Message ID | 20190525181133.4875-6-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | pwm-meson: cleanups and improvements | expand |
On 25/05/2019 20:11, Martin Blumenstingl wrote: > Let meson_pwm_calc() use the polarity from struct pwm_state directly. > This removes a level of indirection where meson_pwm_apply() first had to > set a driver-internal inverter mask which was then only used by > meson_pwm_calc(). > > Instead of adding the polarity as parameter to meson_pwm_calc() switch > to struct pwm_state directly to make it easier to see where the > parameters are actually coming from. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > drivers/pwm/pwm-meson.c | 23 ++++++++--------------- > 1 file changed, 8 insertions(+), 15 deletions(-) > > diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c > index 84b28ba0f903..39ea119add7b 100644 > --- a/drivers/pwm/pwm-meson.c > +++ b/drivers/pwm/pwm-meson.c > @@ -63,7 +63,6 @@ struct meson_pwm { > struct pwm_chip chip; > const struct meson_pwm_data *data; > void __iomem *base; > - u8 inverter_mask; > /* > * Protects register (write) access to the REG_MISC_AB register > * that is shared between the two PWMs. > @@ -116,14 +115,17 @@ static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) > } > > static int meson_pwm_calc(struct meson_pwm *meson, > - struct meson_pwm_channel *channel, unsigned int id, > - unsigned int duty, unsigned int period) > + struct meson_pwm_channel *channel, > + struct pwm_state *state) > { > - unsigned int pre_div, cnt, duty_cnt; > + unsigned int duty, period, pre_div, cnt, duty_cnt; > unsigned long fin_freq = -1; > u64 fin_ps; > > - if (~(meson->inverter_mask >> id) & 0x1) > + duty = state->duty_cycle; > + period = state->period; > + > + if (state->polarity == PWM_POLARITY_INVERSED) > duty = period - duty; > > if (period == channel->state.period && > @@ -278,15 +280,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, > if (state->period != channel->state.period || > state->duty_cycle != channel->state.duty_cycle || > state->polarity != channel->state.polarity) { > - if (state->polarity != channel->state.polarity) { > - if (state->polarity == PWM_POLARITY_NORMAL) > - meson->inverter_mask |= BIT(pwm->hwpwm); > - else > - meson->inverter_mask &= ~BIT(pwm->hwpwm); > - } > - > - err = meson_pwm_calc(meson, channel, pwm->hwpwm, > - state->duty_cycle, state->period); > + err = meson_pwm_calc(meson, channel, state); > if (err < 0) > return err; > > @@ -520,7 +514,6 @@ static int meson_pwm_probe(struct platform_device *pdev) > meson->chip.of_pwm_n_cells = 3; > > meson->data = of_device_get_match_data(&pdev->dev); > - meson->inverter_mask = BIT(meson->chip.npwm) - 1; > > channels = devm_kcalloc(&pdev->dev, meson->chip.npwm, > sizeof(*channels), GFP_KERNEL); > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 84b28ba0f903..39ea119add7b 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -63,7 +63,6 @@ struct meson_pwm { struct pwm_chip chip; const struct meson_pwm_data *data; void __iomem *base; - u8 inverter_mask; /* * Protects register (write) access to the REG_MISC_AB register * that is shared between the two PWMs. @@ -116,14 +115,17 @@ static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) } static int meson_pwm_calc(struct meson_pwm *meson, - struct meson_pwm_channel *channel, unsigned int id, - unsigned int duty, unsigned int period) + struct meson_pwm_channel *channel, + struct pwm_state *state) { - unsigned int pre_div, cnt, duty_cnt; + unsigned int duty, period, pre_div, cnt, duty_cnt; unsigned long fin_freq = -1; u64 fin_ps; - if (~(meson->inverter_mask >> id) & 0x1) + duty = state->duty_cycle; + period = state->period; + + if (state->polarity == PWM_POLARITY_INVERSED) duty = period - duty; if (period == channel->state.period && @@ -278,15 +280,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, if (state->period != channel->state.period || state->duty_cycle != channel->state.duty_cycle || state->polarity != channel->state.polarity) { - if (state->polarity != channel->state.polarity) { - if (state->polarity == PWM_POLARITY_NORMAL) - meson->inverter_mask |= BIT(pwm->hwpwm); - else - meson->inverter_mask &= ~BIT(pwm->hwpwm); - } - - err = meson_pwm_calc(meson, channel, pwm->hwpwm, - state->duty_cycle, state->period); + err = meson_pwm_calc(meson, channel, state); if (err < 0) return err; @@ -520,7 +514,6 @@ static int meson_pwm_probe(struct platform_device *pdev) meson->chip.of_pwm_n_cells = 3; meson->data = of_device_get_match_data(&pdev->dev); - meson->inverter_mask = BIT(meson->chip.npwm) - 1; channels = devm_kcalloc(&pdev->dev, meson->chip.npwm, sizeof(*channels), GFP_KERNEL);
Let meson_pwm_calc() use the polarity from struct pwm_state directly. This removes a level of indirection where meson_pwm_apply() first had to set a driver-internal inverter mask which was then only used by meson_pwm_calc(). Instead of adding the polarity as parameter to meson_pwm_calc() switch to struct pwm_state directly to make it easier to see where the parameters are actually coming from. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/pwm/pwm-meson.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-)