diff mbox series

[v3,6/8] ARM: dts: imx7ulp: add imx7ulp USBOTG1 support

Message ID 20190527030616.44397-7-peter.chen@nxp.com (mailing list archive)
State New, archived
Headers show
Series Add imx7ulp USBOTG1 support | expand

Commit Message

Peter Chen May 27, 2019, 3:06 a.m. UTC 
Add imx7ulp USBOTG1 support.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Shawn Guo June 5, 2019, 6:25 a.m. UTC | #1 
On Mon, May 27, 2019 at 11:06:14AM +0800, Peter Chen wrote:
> Add imx7ulp USBOTG1 support.
> 
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
> ---
>  arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
> index fca6e50f37c8..37b058119505 100644
> --- a/arch/arm/boot/dts/imx7ulp.dtsi
> +++ b/arch/arm/boot/dts/imx7ulp.dtsi
> @@ -30,6 +30,7 @@
>  		serial1 = &lpuart5;
>  		serial2 = &lpuart6;
>  		serial3 = &lpuart7;
> +		usbphy0 = &usbphy1;
>  	};
>  
>  	cpus {
> @@ -133,6 +134,36 @@
>  			clock-names = "ipg", "per";
>  		};
>  
> +		usbotg1: usb@40330000 {
> +			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
> +				"fsl,imx27-usb";

If "fsl,imx6ul-usb" is the one that imx7ulp device is compatible with
and will match in driver, "fsl,imx27-usb" can just be dropped.  Same
comment on usbmisc and usbphy below.

Shawn

> +			reg = <0x40330000 0x200>;
> +			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
> +			phys = <&usbphy1>;
> +			fsl,usbmisc = <&usbmisc1 0>;
> +			ahb-burst-config = <0x0>;
> +			tx-burst-size-dword = <0x8>;
> +			rx-burst-size-dword = <0x8>;
> +			status = "disabled";
> +		};
> +
> +		usbmisc1: usbmisc@40330200 {
> +			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
> +				"fsl,imx6q-usbmisc";
> +			#index-cells = <1>;
> +			reg = <0x40330200 0x200>;
> +		};
> +
> +		usbphy1: usbphy@0x40350000 {
> +			compatible = "fsl,imx7ulp-usbphy",
> +				"fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
> +			reg = <0x40350000 0x1000>;
> +			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
> +			#phy-cells = <0>;
> +		};
> +
>  		usdhc0: mmc@40370000 {
>  			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
>  			reg = <0x40370000 0x10000>;
> -- 
> 2.14.1
>
Peter Chen June 5, 2019, 7:07 a.m. UTC | #2 
> > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > ---
> >  arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7ulp.dtsi
> > b/arch/arm/boot/dts/imx7ulp.dtsi index fca6e50f37c8..37b058119505
> > 100644
> > --- a/arch/arm/boot/dts/imx7ulp.dtsi
> > +++ b/arch/arm/boot/dts/imx7ulp.dtsi
> > @@ -30,6 +30,7 @@
> >  		serial1 = &lpuart5;
> >  		serial2 = &lpuart6;
> >  		serial3 = &lpuart7;
> > +		usbphy0 = &usbphy1;
> >  	};
> >
> >  	cpus {
> > @@ -133,6 +134,36 @@
> >  			clock-names = "ipg", "per";
> >  		};
> >
> > +		usbotg1: usb@40330000 {
> > +			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
> > +				"fsl,imx27-usb";
> 
> If "fsl,imx6ul-usb" is the one that imx7ulp device is compatible with and will match in
> driver, "fsl,imx27-usb" can just be dropped.  Same comment on usbmisc and
> usbphy below.
> 

Ok, will change, thanks.

Peter

> Shawn
> 
> > +			reg = <0x40330000 0x200>;
> > +			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
> > +			phys = <&usbphy1>;
> > +			fsl,usbmisc = <&usbmisc1 0>;
> > +			ahb-burst-config = <0x0>;
> > +			tx-burst-size-dword = <0x8>;
> > +			rx-burst-size-dword = <0x8>;
> > +			status = "disabled";
> > +		};
> > +
> > +		usbmisc1: usbmisc@40330200 {
> > +			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
> > +				"fsl,imx6q-usbmisc";
> > +			#index-cells = <1>;
> > +			reg = <0x40330200 0x200>;
> > +		};
> > +
> > +		usbphy1: usbphy@0x40350000 {
> > +			compatible = "fsl,imx7ulp-usbphy",
> > +				"fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
> > +			reg = <0x40350000 0x1000>;
> > +			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
> > +			#phy-cells = <0>;
> > +		};
> > +
> >  		usdhc0: mmc@40370000 {
> >  			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
> >  			reg = <0x40370000 0x10000>;
> > --
> > 2.14.1
> >
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index fca6e50f37c8..37b058119505 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -30,6 +30,7 @@ 
 		serial1 = &lpuart5;
 		serial2 = &lpuart6;
 		serial3 = &lpuart7;
+		usbphy0 = &usbphy1;
 	};
 
 	cpus {
@@ -133,6 +134,36 @@ 
 			clock-names = "ipg", "per";
 		};
 
+		usbotg1: usb@40330000 {
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
+				"fsl,imx27-usb";
+			reg = <0x40330000 0x200>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
+			phys = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x8>;
+			rx-burst-size-dword = <0x8>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@40330200 {
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				"fsl,imx6q-usbmisc";
+			#index-cells = <1>;
+			reg = <0x40330200 0x200>;
+		};
+
+		usbphy1: usbphy@0x40350000 {
+			compatible = "fsl,imx7ulp-usbphy",
+				"fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+			reg = <0x40350000 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
+			#phy-cells = <0>;
+		};
+
 		usdhc0: mmc@40370000 {
 			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
 			reg = <0x40370000 0x10000>;