diff mbox series

[3/3] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed

Message ID 20190529071843.24767-3-andrew.smirnov@gmail.com (mailing list archive)
State Mainlined
Commit 6bb1e09c4c375db29770444f689f35f5cbe696bc
Headers show
Series [1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip | expand

Commit Message

Andrey Smirnov May 29, 2019, 7:18 a.m. UTC 
Cabling used to connect devices to USBH1 on RDU2 does not meet USB
spec cable quality and cable length requirements to operate at High
Speed, so limit the port to Full Speed only.

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 1 +
 1 file changed, 1 insertion(+)

Comments

Lucas Stach May 29, 2019, 8:27 a.m. UTC | #1 
Am Mittwoch, den 29.05.2019, 00:18 -0700 schrieb Andrey Smirnov:
> Cabling used to connect devices to USBH1 on RDU2 does not meet USB
> spec cable quality and cable length requirements to operate at High
> Speed, so limit the port to Full Speed only.
> 
> > Reported-by: Chris Healy <cphealy@gmail.com>
> > Reviewed-by: Chris Healy <cphealy@gmail.com>
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: Fabio Estevam <festevam@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> index 04d4d4d7e43c..e1d8478884f9 100644
> --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
> @@ -805,6 +805,7 @@
>  &usbh1 {
> >  	vbus-supply = <&reg_5p0v_main>;
> >  	disable-over-current;
> > +	maximum-speed = "full-speed";
> >  	status = "okay";
>  };
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 04d4d4d7e43c..e1d8478884f9 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -805,6 +805,7 @@ 
 &usbh1 {
 	vbus-supply = <&reg_5p0v_main>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	status = "okay";
 };