diff mbox series

[RFC/RFT,v2,06/14] soc: amlogic: meson-clk-measure: add G12B second cluster cpu clk

Message ID 20190626090632.7540-7-narmstrong@baylibre.com (mailing list archive)
State RFC
Headers show
Series arm64: g12a: add support for DVFS | expand

Commit Message

Neil Armstrong June 26, 2019, 9:06 a.m. UTC 
Add the G12B second CPU cluster CPU and SYS_PLL measure IDs.

These IDs returns 0Hz on G12A.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/soc/amlogic/meson-clk-measure.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Kevin Hilman June 28, 2019, 5:58 p.m. UTC | #1 
Neil Armstrong <narmstrong@baylibre.com> writes:

> Add the G12B second CPU cluster CPU and SYS_PLL measure IDs.
>
> These IDs returns 0Hz on G12A.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
diff mbox series

Patch

diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
index c470e24f1dfa..f09b404b39d3 100644
--- a/drivers/soc/amlogic/meson-clk-measure.c
+++ b/drivers/soc/amlogic/meson-clk-measure.c
@@ -324,6 +324,8 @@  static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
 	CLK_MSR_ID(84, "co_tx"),
 	CLK_MSR_ID(89, "hdmi_todig"),
 	CLK_MSR_ID(90, "hdmitx_sys"),
+	CLK_MSR_ID(91, "sys_cpub_div16"),
+	CLK_MSR_ID(92, "sys_pll_cpub_div16"),
 	CLK_MSR_ID(94, "eth_phy_rx"),
 	CLK_MSR_ID(95, "eth_phy_pll"),
 	CLK_MSR_ID(96, "vpu_b"),