diff mbox series

[01/17] ARM: dts: aspeed-g5: Move EDAC node to APB

Message ID 20190726053959.2003-2-andrew@aj.id.au (mailing list archive)
State New, archived
Headers show
Series Clean up ASPEED devicetree warnings | expand

Commit Message

Andrew Jeffery July 26, 2019, 5:39 a.m. UTC
Previously the register interface was not attached to any internal bus,
which is not correct - it lives on the APB.

Cc: Stefan M Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Stefan Schaeckeler (sschaeck) July 29, 2019, 5:26 p.m. UTC | #1
On Thursday, July 25, 2019 at 10:40 PM, Andrew Jeffery wrote:

> Previously the register interface was not attached to any internal bus,
> which is not correct - it lives on the APB.
>
> Cc: Stefan M Schaeckeler <sschaeck@cisco.com>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>  arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)

Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5b1ca265c2ce..7723afc7c249 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@ 
 		reg = <0x80000000 0>;
 	};
 
-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-		status = "disabled";
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -206,6 +199,13 @@ 
 			#size-cells = <1>;
 			ranges;
 
+			edac: sdram@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;