diff mbox series

[RFC] spi: tle620x: remove stale driver

Message ID 20190728161304.32022-1-yamada.masahiro@socionext.com (mailing list archive)
State New, archived
Headers show
Series [RFC] spi: tle620x: remove stale driver | expand

Commit Message

Masahiro Yamada July 28, 2019, 4:13 p.m. UTC 
This driver seems obsolte because this driver needs platform data
but no one in upstream passes it.

Link: https://lkml.org/lkml/2019/7/21/19
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 arch/arm/configs/s3c2410_defconfig |   1 -
 drivers/spi/Kconfig                |   9 -
 drivers/spi/Makefile               |   1 -
 drivers/spi/spi-tle62x0.c          | 317 -----------------------------
 include/linux/spi/tle62x0.h        |  12 --
 5 files changed, 340 deletions(-)
 delete mode 100644 drivers/spi/spi-tle62x0.c
 delete mode 100644 include/linux/spi/tle62x0.h

Comments

Mark Brown July 29, 2019, 10:51 a.m. UTC | #1 
On Mon, Jul 29, 2019 at 01:13:04AM +0900, Masahiro Yamada wrote:
> This driver seems obsolte because this driver needs platform data
> but no one in upstream passes it.

I've not noticed this driver getting in the way of anything?
Masahiro Yamada Aug. 2, 2019, 8:42 a.m. UTC | #2 
On Mon, Jul 29, 2019 at 7:51 PM Mark Brown <broonie@kernel.org> wrote:
>
> On Mon, Jul 29, 2019 at 01:13:04AM +0900, Masahiro Yamada wrote:
> > This driver seems obsolte because this driver needs platform data
> > but no one in upstream passes it.
>
> I've not noticed this driver getting in the way of anything?


I just happened to take a look at include/linux/spi/tle62x0.h
when I was working on my header-test feature of Kbuild.

Then, I asked this in ML, and Arnd was positive
for deleting this.

https://lkml.org/lkml/2019/7/21/19


IMHO, stale code should be cleaned away periodically.

Yet, if you are happy with keeping this driver,
that is fine.

If we could get comments from Ben Books,
that would be helpful.
diff mbox series

Patch

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 95b5a4ffddea..45ee51f690be 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -270,7 +270,6 @@  CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM78=m
 CONFIG_SENSORS_LM85=m
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3a1d8f1170de..38e0651946c1 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -900,15 +900,6 @@  config SPI_LOOPBACK_TEST
 	  primarily used for development of spi_master drivers
 	  and to detect regressions
 
-config SPI_TLE62X0
-	tristate "Infineon TLE62X0 (for power switching)"
-	depends on SYSFS
-	help
-	  SPI driver for Infineon TLE62X0 series line driver chips,
-	  such as the TLE6220, TLE6230 and TLE6240.  This provides a
-	  sysfs interface, with each line presented as a kind of GPIO
-	  exposing both switch control and diagnostic feedback.
-
 #
 # Add new SPI protocol masters in alphabetical order above this line
 #
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 63dcab552bcb..9566d896a4c8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -110,7 +110,6 @@  obj-$(CONFIG_SPI_SYNQUACER)		+= spi-synquacer.o
 obj-$(CONFIG_SPI_TEGRA114)		+= spi-tegra114.o
 obj-$(CONFIG_SPI_TEGRA20_SFLASH)	+= spi-tegra20-sflash.o
 obj-$(CONFIG_SPI_TEGRA20_SLINK)		+= spi-tegra20-slink.o
-obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
 spi-thunderx-objs			:= spi-cavium.o spi-cavium-thunderx.o
 obj-$(CONFIG_SPI_THUNDERX)		+= spi-thunderx.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c
deleted file mode 100644
index 60dc69a39ace..000000000000
--- a/drivers/spi/spi-tle62x0.c
+++ /dev/null
@@ -1,317 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support Infineon TLE62x0 driver chips
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks, <ben@simtec.co.uk>
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tle62x0.h>
-
-
-#define CMD_READ	0x00
-#define CMD_SET		0xff
-
-#define DIAG_NORMAL	0x03
-#define DIAG_OVERLOAD	0x02
-#define DIAG_OPEN	0x01
-#define DIAG_SHORTGND	0x00
-
-struct tle62x0_state {
-	struct spi_device	*us;
-	struct mutex		lock;
-	unsigned int		nr_gpio;
-	unsigned int		gpio_state;
-
-	unsigned char		tx_buff[4];
-	unsigned char		rx_buff[4];
-};
-
-static int to_gpio_num(struct device_attribute *attr);
-
-static inline int tle62x0_write(struct tle62x0_state *st)
-{
-	unsigned char *buff = st->tx_buff;
-	unsigned int gpio_state = st->gpio_state;
-
-	buff[0] = CMD_SET;
-
-	if (st->nr_gpio == 16) {
-		buff[1] = gpio_state >> 8;
-		buff[2] = gpio_state;
-	} else {
-		buff[1] = gpio_state;
-	}
-
-	dev_dbg(&st->us->dev, "buff %3ph\n", buff);
-
-	return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2);
-}
-
-static inline int tle62x0_read(struct tle62x0_state *st)
-{
-	unsigned char *txbuff = st->tx_buff;
-	struct spi_transfer xfer = {
-		.tx_buf		= txbuff,
-		.rx_buf		= st->rx_buff,
-		.len		= (st->nr_gpio * 2) / 8,
-	};
-	struct spi_message msg;
-
-	txbuff[0] = CMD_READ;
-	txbuff[1] = 0x00;
-	txbuff[2] = 0x00;
-	txbuff[3] = 0x00;
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-
-	return spi_sync(st->us, &msg);
-}
-
-static unsigned char *decode_fault(unsigned int fault_code)
-{
-	fault_code &= 3;
-
-	switch (fault_code) {
-	case DIAG_NORMAL:
-		return "N";
-	case DIAG_OVERLOAD:
-		return "V";
-	case DIAG_OPEN:
-		return "O";
-	case DIAG_SHORTGND:
-		return "G";
-	}
-
-	return "?";
-}
-
-static ssize_t tle62x0_status_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct tle62x0_state *st = dev_get_drvdata(dev);
-	char *bp = buf;
-	unsigned char *buff = st->rx_buff;
-	unsigned long fault = 0;
-	int ptr;
-	int ret;
-
-	mutex_lock(&st->lock);
-	ret = tle62x0_read(st);
-	dev_dbg(dev, "tle62x0_read() returned %d\n", ret);
-	if (ret < 0) {
-		mutex_unlock(&st->lock);
-		return ret;
-	}
-
-	for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {
-		fault <<= 8;
-		fault  |= ((unsigned long)buff[ptr]);
-
-		dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]);
-	}
-
-	for (ptr = 0; ptr < st->nr_gpio; ptr++) {
-		bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2)));
-	}
-
-	*bp++ = '\n';
-
-	mutex_unlock(&st->lock);
-	return bp - buf;
-}
-
-static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL);
-
-static ssize_t tle62x0_gpio_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct tle62x0_state *st = dev_get_drvdata(dev);
-	int gpio_num = to_gpio_num(attr);
-	int value;
-
-	mutex_lock(&st->lock);
-	value = (st->gpio_state >> gpio_num) & 1;
-	mutex_unlock(&st->lock);
-
-	return snprintf(buf, PAGE_SIZE, "%d", value);
-}
-
-static ssize_t tle62x0_gpio_store(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t len)
-{
-	struct tle62x0_state *st = dev_get_drvdata(dev);
-	int gpio_num = to_gpio_num(attr);
-	unsigned long val;
-	char *endp;
-
-	val = simple_strtoul(buf, &endp, 0);
-	if (buf == endp)
-		return -EINVAL;
-
-	dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val);
-
-	mutex_lock(&st->lock);
-
-	if (val)
-		st->gpio_state |= 1 << gpio_num;
-	else
-		st->gpio_state &= ~(1 << gpio_num);
-
-	tle62x0_write(st);
-	mutex_unlock(&st->lock);
-
-	return len;
-}
-
-static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO,
-		tle62x0_gpio_show, tle62x0_gpio_store);
-
-static struct device_attribute *gpio_attrs[] = {
-	[0]		= &dev_attr_gpio1,
-	[1]		= &dev_attr_gpio2,
-	[2]		= &dev_attr_gpio3,
-	[3]		= &dev_attr_gpio4,
-	[4]		= &dev_attr_gpio5,
-	[5]		= &dev_attr_gpio6,
-	[6]		= &dev_attr_gpio7,
-	[7]		= &dev_attr_gpio8,
-	[8]		= &dev_attr_gpio9,
-	[9]		= &dev_attr_gpio10,
-	[10]		= &dev_attr_gpio11,
-	[11]		= &dev_attr_gpio12,
-	[12]		= &dev_attr_gpio13,
-	[13]		= &dev_attr_gpio14,
-	[14]		= &dev_attr_gpio15,
-	[15]		= &dev_attr_gpio16
-};
-
-static int to_gpio_num(struct device_attribute *attr)
-{
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) {
-		if (gpio_attrs[ptr] == attr)
-			return ptr;
-	}
-
-	return -1;
-}
-
-static int tle62x0_probe(struct spi_device *spi)
-{
-	struct tle62x0_state *st;
-	struct tle62x0_pdata *pdata;
-	int ptr;
-	int ret;
-
-	pdata = dev_get_platdata(&spi->dev);
-	if (pdata == NULL) {
-		dev_err(&spi->dev, "no device data specified\n");
-		return -EINVAL;
-	}
-
-	st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);
-	if (st == NULL)
-		return -ENOMEM;
-
-	st->us = spi;
-	st->nr_gpio = pdata->gpio_count;
-	st->gpio_state = pdata->init_state;
-
-	mutex_init(&st->lock);
-
-	ret = device_create_file(&spi->dev, &dev_attr_status_show);
-	if (ret) {
-		dev_err(&spi->dev, "cannot create status attribute\n");
-		goto err_status;
-	}
-
-	for (ptr = 0; ptr < pdata->gpio_count; ptr++) {
-		ret = device_create_file(&spi->dev, gpio_attrs[ptr]);
-		if (ret) {
-			dev_err(&spi->dev, "cannot create gpio attribute\n");
-			goto err_gpios;
-		}
-	}
-
-	/* tle62x0_write(st); */
-	spi_set_drvdata(spi, st);
-	return 0;
-
- err_gpios:
-	while (--ptr >= 0)
-		device_remove_file(&spi->dev, gpio_attrs[ptr]);
-
-	device_remove_file(&spi->dev, &dev_attr_status_show);
-
- err_status:
-	kfree(st);
-	return ret;
-}
-
-static int tle62x0_remove(struct spi_device *spi)
-{
-	struct tle62x0_state *st = spi_get_drvdata(spi);
-	int ptr;
-
-	for (ptr = 0; ptr < st->nr_gpio; ptr++)
-		device_remove_file(&spi->dev, gpio_attrs[ptr]);
-
-	device_remove_file(&spi->dev, &dev_attr_status_show);
-	kfree(st);
-	return 0;
-}
-
-static struct spi_driver tle62x0_driver = {
-	.driver = {
-		.name	= "tle62x0",
-	},
-	.probe		= tle62x0_probe,
-	.remove		= tle62x0_remove,
-};
-
-module_spi_driver(tle62x0_driver);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("TLE62x0 SPI driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:tle62x0");
diff --git a/include/linux/spi/tle62x0.h b/include/linux/spi/tle62x0.h
deleted file mode 100644
index 5d74b9fffca2..000000000000
--- a/include/linux/spi/tle62x0.h
+++ /dev/null
@@ -1,12 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * tle62x0.h - platform glue to Infineon TLE62x0 driver chips
- *
- * Copyright 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
-*/
-
-struct tle62x0_pdata {
-	unsigned int		init_state;
-	unsigned int		gpio_count;
-};