| Message ID | 20190807082556.5013-22-philippe.schenker@toradex.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Common patches from downstream development | expand |
Hi Philippe On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote: > This commit adds UHS capability to Toradex Eval Boards How about any other carrier board? > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> > > --- > > Changes in v3: > - New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS > support > > Changes in v2: None > > arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi > b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi > index 576dec9ff81c..90121fbe561f 100644 > --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi > +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi > @@ -210,9 +210,16 @@ > }; > > &usdhc1 { > - keep-power-in-suspend; > - wakeup-source; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; > + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; > vmmc-supply = <®_3v3>; > + vqmmc-supply = <®_LDO2>; > + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; > + disable-wp; > + enable-sdio-wakeup; > + keep-power-in-suspend; > status = "okay"; > }; > > -- > 2.22.0 Cheers Marcel
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 576dec9ff81c..90121fbe561f 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -210,9 +210,16 @@ }; &usdhc1 { - keep-power-in-suspend; - wakeup-source; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; vmmc-supply = <®_3v3>; + vqmmc-supply = <®_LDO2>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + disable-wp; + enable-sdio-wakeup; + keep-power-in-suspend; status = "okay"; };
This commit adds UHS capability to Toradex Eval Boards Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> --- Changes in v3: - New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS support Changes in v2: None arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)