diff mbox series

[7/9] ARM: dts: at91: at91sam9xx5ek: Style cleanup

Message ID 20190812212757.23432-7-uwe@kleine-koenig.org (mailing list archive)
State Mainlined
Commit b222de0242dfb7efaa6e35b68ce844878667ca82
Headers show
Series [1/9] ARM: dts: at91: Add label for sam9x5's internal RTC | expand

Commit Message

Uwe Kleine-König Aug. 12, 2019, 9:27 p.m. UTC
- newline between properties and sub-nodes
- use tags from included dtsi instead of duplicating the hierarchy

There are no differences in the generated .dtbs

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
---
 arch/arm/boot/dts/at91sam9g15ek.dts |  12 +-
 arch/arm/boot/dts/at91sam9g25ek.dts |  89 +++++-----
 arch/arm/boot/dts/at91sam9g35ek.dts |  22 +--
 arch/arm/boot/dts/at91sam9x25ek.dts |  36 ++--
 arch/arm/boot/dts/at91sam9x35ek.dts |  43 +++--
 arch/arm/boot/dts/at91sam9x5ek.dtsi | 265 ++++++++++++++--------------
 6 files changed, 224 insertions(+), 243 deletions(-)

Comments

Alexandre Belloni Aug. 21, 2019, 4:46 p.m. UTC | #1
On 12/08/2019 23:27:55+0200, Uwe Kleine-König wrote:
> - newline between properties and sub-nodes
> - use tags from included dtsi instead of duplicating the hierarchy
> 
> There are no differences in the generated .dtbs
> 
> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
> ---
>  arch/arm/boot/dts/at91sam9g15ek.dts |  12 +-
>  arch/arm/boot/dts/at91sam9g25ek.dts |  89 +++++-----
>  arch/arm/boot/dts/at91sam9g35ek.dts |  22 +--
>  arch/arm/boot/dts/at91sam9x25ek.dts |  36 ++--
>  arch/arm/boot/dts/at91sam9x35ek.dts |  43 +++--
>  arch/arm/boot/dts/at91sam9x5ek.dtsi | 265 ++++++++++++++--------------
>  6 files changed, 224 insertions(+), 243 deletions(-)
> 
Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
index 97100d298400..889a5097eb2d 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -14,14 +14,6 @@ 
 	model = "Atmel AT91SAM9G15-EK";
 	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	ahb {
-		apb {
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-			};
-		};
-	};
-
 	backlight: backlight {
 		status = "okay";
 	};
@@ -38,3 +30,7 @@ 
 		status = "okay";
 	};
 };
+
+&hlcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index a02c6c79ce52..61b0bdb615dc 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -12,57 +12,54 @@ 
 / {
 	model = "Atmel AT91SAM9G25-EK";
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
 
-	ahb {
-		apb {
-			spi0: spi@f0000000 {
-				status = "disabled";
-			};
-
-			mmc1: mmc@f000c000 {
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				ov2640: camera@30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
-					assigned-clock-rates = <25000000>;
-					status = "okay";
+&i2c0 {
+	camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		assigned-clock-rates = <25000000>;
+		status = "okay";
 
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
 			};
+		};
+	};
+};
 
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&isi {
+	status = "okay";
 
-			isi: isi@f8048000 {
-				status = "okay";
-				port {
-					isi_0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
+	port {
+		isi_0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
 		};
 	};
 };
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
index 449ec712ab52..f966b56de63c 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -14,19 +14,6 @@ 
 	model = "Atmel AT91SAM9G35-EK";
 	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-			};
-		};
-	};
-
 	backlight: backlight {
 		status = "okay";
 	};
@@ -43,3 +30,12 @@ 
 		status = "okay";
 	};
 };
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 4e1c3df89a6c..ad7c6b36f0ba 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -12,28 +12,24 @@ 
 / {
 	model = "Atmel AT91SAM9X25-EK";
 	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
 
-	ahb {
-		apb {
-			can1: can@f8004000 {
-				status = "okay";
-			};
+&can1 {
+	status = "okay";
+};
 
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
 
-			macb1: ethernet@f8030000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
 
-			pwm0: pwm@f8034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
-				status = "okay";
-			};
-		};
-	};
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
index 7646c680fa97..66675c787b97 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -13,32 +13,29 @@ 
 / {
 	model = "Atmel AT91SAM9X35-EK";
 	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-			};
-		};
-	};
+&backlight {
+	status = "okay";
+};
 
-	backlight: backlight {
-		status = "okay";
-	};
+&bl_reg {
+	status = "okay";
+};
 
-	bl_reg: backlight_regulator {
-		status = "okay";
-	};
+&hlcdc {
+	status = "okay";
+};
 
-	panel: panel {
-		status = "okay";
-	};
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
 
-	panel_reg: panel_regulator {
-		status = "okay";
-	};
+&panel_reg {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 2ad0a43656e4..c934928742b0 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -16,139 +16,6 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mmc1: mmc@f000c000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc1
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			usb2: gadget@f803c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_board_usb2>;
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-
-				wm8731: wm8731@1a {
-					compatible = "wm8731";
-					reg = <0x1a>;
-				};
-			};
-
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				camera_sensor {
-					pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
-					};
-
-					pinctrl_sensor_power: sensor_power-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_reset: sensor_reset-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				mmc1 {
-					pinctrl_board_mmc1: mmc1-board {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				usb2 {
-					pinctrl_board_usb2: usb2-board {
-						atmel,pins =
-							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
-					};
-				};
-			};
-
-			spi0: spi@f0000000 {
-				status = "disabled"; /* conflicts with mmc1 */
-				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-
-			ssc0: ssc@f0010000 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@600000 {
-			status = "okay";
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
-		};
-
-		usb1: ehci@700000 {
-			status = "okay";
-		};
-	};
-
 	sound {
 		compatible = "atmel,sam9x5-wm8731-audio";
 
@@ -164,3 +31,135 @@ 
 		atmel,audio-codec = <&wm8731>;
 	};
 };
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8731: wm8731@1a {
+		compatible = "wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	camera_sensor {
+		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+		};
+
+		pinctrl_sensor_power: sensor_power-0 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_sensor_reset: sensor_reset-0 {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+		};
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+	status = "disabled"; /* conflicts with mmc1 */
+
+	m25p80@0 {
+		compatible = "atmel,at25df321a";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};