diff mbox series

[V3,1/2] media: dt-bindings: media: i2c: Add bindings for OV02A10

Message ID 20190819034331.13098-2-dongchun.zhu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series media: Add support for OV02A10 sensor | expand

Commit Message

Dongchun Zhu Aug. 19, 2019, 3:43 a.m. UTC
From: Dongchun Zhu <dongchun.zhu@mediatek.com>

Add device tree binding documentation for the OV02A10 camera sensor.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
 .../devicetree/bindings/media/i2c/ov02a10.txt      | 54 ++++++++++++++++++++++
 MAINTAINERS                                        |  7 +++
 2 files changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt

Comments

Rob Herring (Arm) Aug. 27, 2019, 4:48 p.m. UTC | #1
On Mon, 19 Aug 2019 11:43:30 +0800, <dongchun.zhu@mediatek.com> wrote:
> From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> 
> Add device tree binding documentation for the OV02A10 camera sensor.
> 
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
>  .../devicetree/bindings/media/i2c/ov02a10.txt      | 54 ++++++++++++++++++++++
>  MAINTAINERS                                        |  7 +++
>  2 files changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
new file mode 100644
index 0000000..4a83a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
@@ -0,0 +1,54 @@ 
+* Omnivision OV02A10 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: shall be "ovti,ov02a10"
+- clocks: reference to the xvclk input clock
+- clock-names: shall be "xvclk"
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- dvdd-supply: Digital core voltage supply, 1.8 volts
+- reset-gpios: reference to the GPIO connected to the reset pin, if any.
+	       This is an active high signal to the OV02A10.
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+		   if any. This is an active low signal to the OV02A10.
+
+Optional Properties:
+- rotation: as defined in
+	    Documentation/devicetree/bindings/media/video-interfaces.txt,
+	    valid values are 0 (sensor mounted upright) and 180 (sensor
+	    mounted upside down).
+
+The device node shall contain one 'port' child node with an
+'endpoint' subnode for its digital output video port,
+in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+The endpoint optional property 'data-lanes' shall be "<1>".
+
+Example:
+&i2c4 {
+	ov02a10: camera-sensor@3d {
+		compatible = "ovti,ov02a10";
+		reg = <0x3d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_pins_cam1_mclk_on>;
+
+		clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
+			<&topckgen CLK_TOP_UNIVP_192M_D8>;
+		clock-names = "xvclk", "freq_mux";
+
+		avdd-supply = <&mt6358_vcama1_reg>;
+		dvdd-supply = <&mt6358_vcn18_reg>;
+		dovdd-supply = <&mt6358_vcamio_reg>;
+		reset-gpios = <&pio 109 1>;
+		powerdown-gpios = <&pio 107 1>;
+		rotation = <180>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov02a10_core: endpoint {
+				remote-endpoint = <&ov02a10_0>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e..41734fb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11816,6 +11816,13 @@  T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/ov13858.c
 
+OMNIVISION OV02A10 SENSOR DRIVER
+M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/ov02a10.txt
+
 OMNIVISION OV2680 SENSOR DRIVER
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-media@vger.kernel.org