| Message ID | 20190821183501.33588dd8@xhacker.debian (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] arm64: implement KPROBES_ON_FTRACE | expand |
Jisheng Zhang wrote: > KPROBES_ON_FTRACE avoids much of the overhead with regular kprobes as it > eliminates the need for a trap, as well as the need to emulate or > single-step instructions. > > Tested on berlin arm64 platform. > > ~ # mount -t debugfs debugfs /sys/kernel/debug/ > ~ # cd /sys/kernel/debug/ > /sys/kernel/debug # echo 'p _do_fork' > tracing/kprobe_events > > before the patch: > > /sys/kernel/debug # cat kprobes/list > ffffff801009fe28 k _do_fork+0x0 [DISABLED] > > after the patch: > > /sys/kernel/debug # cat kprobes/list > ffffff801009ff54 k _do_fork+0x4 [DISABLED][FTRACE] > > Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> > --- > KPROBES_ON_FTRACE avoids much of the overhead with regular kprobes as it > eliminates the need for a trap, as well as the need to emulate or > single-step instructions. > > Applied after arm64 FTRACE_WITH_REGS: > http://lists.infradead.org/pipermail/linux-arm-kernel/2019-August/674404.html > > Changes since v2: > - remove patch1, make it a single cleanup patch > - remove "This patch" in the change log > - implement arm64's kprobe_lookup_name() and arch_kprobe_on_func_entry instead > patching the common kprobes code > > Changes since v1: > - make the kprobes/x86: use instruction_pointer and instruction_pointer_set > as patch1 > - add Masami's ACK to patch1 > - add some description about KPROBES_ON_FTRACE and why we need it on > arm64 > - correct the log before the patch > - remove the consolidation patch, make it as TODO > - only adjust kprobe's addr when KPROBE_FLAG_FTRACE is set > - if KPROBES_ON_FTRACE, ftrace_call_adjust() the kprobe's addr before > calling ftrace_location() > - update the kprobes-on-ftrace/arch-support.txt in doc > > > .../debug/kprobes-on-ftrace/arch-support.txt | 2 +- > arch/arm64/Kconfig | 1 + > arch/arm64/kernel/probes/Makefile | 1 + > arch/arm64/kernel/probes/ftrace.c | 60 +++++++++++++++++++ > arch/arm64/kernel/probes/kprobes.c | 23 +++++++ > 5 files changed, 86 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/kernel/probes/ftrace.c > > diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt > index 68f266944d5f..e8358a38981c 100644 > --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt > +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt > @@ -9,7 +9,7 @@ > | alpha: | TODO | > | arc: | TODO | > | arm: | TODO | > - | arm64: | TODO | > + | arm64: | ok | > | c6x: | TODO | > | csky: | TODO | > | h8300: | TODO | > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig > index 663392d1eae2..928700f15e23 100644 > --- a/arch/arm64/Kconfig > +++ b/arch/arm64/Kconfig > @@ -167,6 +167,7 @@ config ARM64 > select HAVE_STACKPROTECTOR > select HAVE_SYSCALL_TRACEPOINTS > select HAVE_KPROBES > + select HAVE_KPROBES_ON_FTRACE > select HAVE_KRETPROBES > select HAVE_GENERIC_VDSO > select IOMMU_DMA if IOMMU_SUPPORT > diff --git a/arch/arm64/kernel/probes/Makefile b/arch/arm64/kernel/probes/Makefile > index 8e4be92e25b1..4020cfc66564 100644 > --- a/arch/arm64/kernel/probes/Makefile > +++ b/arch/arm64/kernel/probes/Makefile > @@ -4,3 +4,4 @@ obj-$(CONFIG_KPROBES) += kprobes.o decode-insn.o \ > simulate-insn.o > obj-$(CONFIG_UPROBES) += uprobes.o decode-insn.o \ > simulate-insn.o > +obj-$(CONFIG_KPROBES_ON_FTRACE) += ftrace.o > diff --git a/arch/arm64/kernel/probes/ftrace.c b/arch/arm64/kernel/probes/ftrace.c > new file mode 100644 > index 000000000000..1f0c09d02bb8 > --- /dev/null > +++ b/arch/arm64/kernel/probes/ftrace.c > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Dynamic Ftrace based Kprobes Optimization > + * > + * Copyright (C) Hitachi Ltd., 2012 > + * Copyright (C) 2019 Jisheng Zhang <jszhang@kernel.org> > + * Synaptics Incorporated > + */ > + > +#include <linux/kprobes.h> > + > +/* Ftrace callback handler for kprobes -- called under preepmt disabed */ > +void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip, > + struct ftrace_ops *ops, struct pt_regs *regs) > +{ > + struct kprobe *p; > + struct kprobe_ctlblk *kcb; > + > + /* Preempt is disabled by ftrace */ > + p = get_kprobe((kprobe_opcode_t *)ip); > + if (unlikely(!p) || kprobe_disabled(p)) > + return; > + > + kcb = get_kprobe_ctlblk(); > + if (kprobe_running()) { > + kprobes_inc_nmissed_count(p); > + } else { > + unsigned long orig_ip = instruction_pointer(regs); > + /* Kprobe handler expects regs->pc = pc + 4 as breakpoint hit */ > + instruction_pointer_set(regs, ip + sizeof(kprobe_opcode_t)); > + > + __this_cpu_write(current_kprobe, p); > + kcb->kprobe_status = KPROBE_HIT_ACTIVE; > + if (!p->pre_handler || !p->pre_handler(p, regs)) { > + /* > + * Emulate singlestep (and also recover regs->pc) > + * as if there is a nop > + */ > + instruction_pointer_set(regs, > + (unsigned long)p->addr + MCOUNT_INSN_SIZE); > + if (unlikely(p->post_handler)) { > + kcb->kprobe_status = KPROBE_HIT_SSDONE; > + p->post_handler(p, regs, 0); > + } > + instruction_pointer_set(regs, orig_ip); > + } > + /* > + * If pre_handler returns !0, it changes regs->pc. We have to > + * skip emulating post_handler. > + */ > + __this_cpu_write(current_kprobe, NULL); > + } > +} > +NOKPROBE_SYMBOL(kprobe_ftrace_handler); > + > +int arch_prepare_kprobe_ftrace(struct kprobe *p) > +{ > + p->ainsn.api.insn = NULL; > + return 0; > +} > diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c > index c4452827419b..f2bf8c70da79 100644 > --- a/arch/arm64/kernel/probes/kprobes.c > +++ b/arch/arm64/kernel/probes/kprobes.c > @@ -551,6 +551,29 @@ void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs) > return (void *)orig_ret_address; > } > > +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS This should be CONFIG_KPROBES_ON_FTRACE since you only want to choose the ftrace entry in that case. > +kprobe_opcode_t *kprobe_lookup_name(const char *name, unsigned int offset) > +{ > + unsigned long addr = kallsyms_lookup_name(name); > + unsigned long faddr; > + > + /* > + * with -fpatchable-function-entry=2, the first 4 bytes is the > + * LR saver, then the actual call insn. So ftrace location is > + * always on the first 4 bytes offset. > + */ > + faddr = ftrace_location_range(addr, addr + AARCH64_INSN_SIZE); > + if (faddr) > + return (kprobe_opcode_t *)faddr; You should only return the ftrace location if offset is 0, since the offset is added to the address returned from here (see _kprobe_addr()). - Naveen
diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index 68f266944d5f..e8358a38981c 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -9,7 +9,7 @@ | alpha: | TODO | | arc: | TODO | | arm: | TODO | - | arm64: | TODO | + | arm64: | ok | | c6x: | TODO | | csky: | TODO | | h8300: | TODO | diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 663392d1eae2..928700f15e23 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -167,6 +167,7 @@ config ARM64 select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS select HAVE_KPROBES + select HAVE_KPROBES_ON_FTRACE select HAVE_KRETPROBES select HAVE_GENERIC_VDSO select IOMMU_DMA if IOMMU_SUPPORT diff --git a/arch/arm64/kernel/probes/Makefile b/arch/arm64/kernel/probes/Makefile index 8e4be92e25b1..4020cfc66564 100644 --- a/arch/arm64/kernel/probes/Makefile +++ b/arch/arm64/kernel/probes/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_KPROBES) += kprobes.o decode-insn.o \ simulate-insn.o obj-$(CONFIG_UPROBES) += uprobes.o decode-insn.o \ simulate-insn.o +obj-$(CONFIG_KPROBES_ON_FTRACE) += ftrace.o diff --git a/arch/arm64/kernel/probes/ftrace.c b/arch/arm64/kernel/probes/ftrace.c new file mode 100644 index 000000000000..1f0c09d02bb8 --- /dev/null +++ b/arch/arm64/kernel/probes/ftrace.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Dynamic Ftrace based Kprobes Optimization + * + * Copyright (C) Hitachi Ltd., 2012 + * Copyright (C) 2019 Jisheng Zhang <jszhang@kernel.org> + * Synaptics Incorporated + */ + +#include <linux/kprobes.h> + +/* Ftrace callback handler for kprobes -- called under preepmt disabed */ +void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip, + struct ftrace_ops *ops, struct pt_regs *regs) +{ + struct kprobe *p; + struct kprobe_ctlblk *kcb; + + /* Preempt is disabled by ftrace */ + p = get_kprobe((kprobe_opcode_t *)ip); + if (unlikely(!p) || kprobe_disabled(p)) + return; + + kcb = get_kprobe_ctlblk(); + if (kprobe_running()) { + kprobes_inc_nmissed_count(p); + } else { + unsigned long orig_ip = instruction_pointer(regs); + /* Kprobe handler expects regs->pc = pc + 4 as breakpoint hit */ + instruction_pointer_set(regs, ip + sizeof(kprobe_opcode_t)); + + __this_cpu_write(current_kprobe, p); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + if (!p->pre_handler || !p->pre_handler(p, regs)) { + /* + * Emulate singlestep (and also recover regs->pc) + * as if there is a nop + */ + instruction_pointer_set(regs, + (unsigned long)p->addr + MCOUNT_INSN_SIZE); + if (unlikely(p->post_handler)) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + p->post_handler(p, regs, 0); + } + instruction_pointer_set(regs, orig_ip); + } + /* + * If pre_handler returns !0, it changes regs->pc. We have to + * skip emulating post_handler. + */ + __this_cpu_write(current_kprobe, NULL); + } +} +NOKPROBE_SYMBOL(kprobe_ftrace_handler); + +int arch_prepare_kprobe_ftrace(struct kprobe *p) +{ + p->ainsn.api.insn = NULL; + return 0; +} diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index c4452827419b..f2bf8c70da79 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -551,6 +551,29 @@ void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs) return (void *)orig_ret_address; } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +kprobe_opcode_t *kprobe_lookup_name(const char *name, unsigned int offset) +{ + unsigned long addr = kallsyms_lookup_name(name); + unsigned long faddr; + + /* + * with -fpatchable-function-entry=2, the first 4 bytes is the + * LR saver, then the actual call insn. So ftrace location is + * always on the first 4 bytes offset. + */ + faddr = ftrace_location_range(addr, addr + AARCH64_INSN_SIZE); + if (faddr) + return (kprobe_opcode_t *)faddr; + return (kprobe_opcode_t *)addr; +} + +bool arch_kprobe_on_func_entry(unsigned long offset) +{ + return offset <= AARCH64_INSN_SIZE; +} +#endif + void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs) {
KPROBES_ON_FTRACE avoids much of the overhead with regular kprobes as it eliminates the need for a trap, as well as the need to emulate or single-step instructions. Tested on berlin arm64 platform. ~ # mount -t debugfs debugfs /sys/kernel/debug/ ~ # cd /sys/kernel/debug/ /sys/kernel/debug # echo 'p _do_fork' > tracing/kprobe_events before the patch: /sys/kernel/debug # cat kprobes/list ffffff801009fe28 k _do_fork+0x0 [DISABLED] after the patch: /sys/kernel/debug # cat kprobes/list ffffff801009ff54 k _do_fork+0x4 [DISABLED][FTRACE] Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> --- KPROBES_ON_FTRACE avoids much of the overhead with regular kprobes as it eliminates the need for a trap, as well as the need to emulate or single-step instructions. Applied after arm64 FTRACE_WITH_REGS: http://lists.infradead.org/pipermail/linux-arm-kernel/2019-August/674404.html Changes since v2: - remove patch1, make it a single cleanup patch - remove "This patch" in the change log - implement arm64's kprobe_lookup_name() and arch_kprobe_on_func_entry instead patching the common kprobes code Changes since v1: - make the kprobes/x86: use instruction_pointer and instruction_pointer_set as patch1 - add Masami's ACK to patch1 - add some description about KPROBES_ON_FTRACE and why we need it on arm64 - correct the log before the patch - remove the consolidation patch, make it as TODO - only adjust kprobe's addr when KPROBE_FLAG_FTRACE is set - if KPROBES_ON_FTRACE, ftrace_call_adjust() the kprobe's addr before calling ftrace_location() - update the kprobes-on-ftrace/arch-support.txt in doc .../debug/kprobes-on-ftrace/arch-support.txt | 2 +- arch/arm64/Kconfig | 1 + arch/arm64/kernel/probes/Makefile | 1 + arch/arm64/kernel/probes/ftrace.c | 60 +++++++++++++++++++ arch/arm64/kernel/probes/kprobes.c | 23 +++++++ 5 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/kernel/probes/ftrace.c