diff mbox series

[RESEND,3/5] bluetooth: hci_bcm: Give more time to come out of reset

Message ID 20190823103139.17687-4-megous@megous.com (mailing list archive)
State New, archived
Headers show
Series Add bluetooth support for Orange Pi 3 | expand

Commit Message

Ondřej Jirman Aug. 23, 2019, 10:31 a.m. UTC 
From: Ondrej Jirman <megous@megous.com>

Some supported devices need more time to come out of reset (eg.
BCM4345C5 in AP6256).

I don't have/found a datasheet, so the value was arrive at
experimentally with the Oprange Pi 3 board. Without increased delay,
I got intermittent failures during probe. This is a Bluetooth 5.0
device, so maybe that's why it takes longer to initialize than the
others.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/bluetooth/hci_bcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 95c312ae94cf..7646636f2d18 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -260,7 +260,7 @@  static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	}
 
 	/* wait for device to power on and come out of reset */
-	usleep_range(10000, 20000);
+	usleep_range(100000, 120000);
 
 	dev->res_enabled = powered;