@@ -17,8 +17,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand-ecc-sw-hamming.h>
#include <asm/byteorder.h>
@@ -75,7 +73,7 @@ static const char bitsperbyte[256] = {
* addressbits is a lookup table to filter out the bits from the xor-ed
* ECC data that identify the faulty location.
* this is only used for repairing parity
- * see the comments in nand_correct_data for more details
+ * see the comments in nand_ecc_sw_hamming_correct for more details
*/
static const char addressbits[256] = {
0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
@@ -112,30 +110,23 @@ static const char addressbits[256] = {
0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f
};
-/**
- * __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
- * block
- * @buf: input buffer with raw data
- * @eccsize: data bytes per ECC step (256 or 512)
- * @code: output buffer with ECC
- * @sm_order: Smart Media byte ordering
- */
-void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
- unsigned char *code, bool sm_order)
+int ecc_sw_hamming_calculate(const unsigned char *buf, unsigned int step_size,
+ unsigned char *code, bool sm_order)
{
- int i;
- const uint32_t *bp = (uint32_t *)buf;
- /* 256 or 512 bytes/ecc */
- const uint32_t eccsize_mult = eccsize >> 8;
- uint32_t cur; /* current value in buffer */
+ const u32 *bp = (uint32_t *)buf;
+ const u32 eccsize_mult = step_size >> 8;
+ /* current value in buffer */
+ u32 cur;
/* rp0..rp15..rp17 are the various accumulated parities (per byte) */
- uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
- uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
- uint32_t uninitialized_var(rp17); /* to make compiler happy */
- uint32_t par; /* the cumulative parity for all data */
- uint32_t tmppar; /* the cumulative parity for this iteration;
- for rp12, rp14 and rp16 at the end of the
- loop */
+ u32 rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+ u32 rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
+ /* Make the compiler happy */
+ u32 uninitialized_var(rp17);
+ /* Cumulative parity for all data */
+ u32 par;
+ /* Cumulative parity at the end of the loop (rp12, rp14, rp16) */
+ u32 tmppar;
+ int i;
par = 0;
rp4 = 0;
@@ -356,45 +347,36 @@ void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
(invparity[par & 0x55] << 2) |
(invparity[rp17] << 1) |
(invparity[rp16] << 0);
-}
-EXPORT_SYMBOL(__nand_calculate_ecc);
-
-/**
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
- * block
- * @chip: NAND chip object
- * @buf: input buffer with raw data
- * @code: output buffer with ECC
- */
-int nand_calculate_ecc(struct nand_chip *chip, const unsigned char *buf,
- unsigned char *code)
-{
- bool sm_order = chip->ecc.options & NAND_ECC_SOFT_HAMMING_SM_ORDER;
-
- __nand_calculate_ecc(buf, chip->ecc.size, code, sm_order);
return 0;
}
-EXPORT_SYMBOL(nand_calculate_ecc);
+EXPORT_SYMBOL(ecc_sw_hamming_calculate);
/**
- * __nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @buf: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
- * @eccsize: data bytes per ECC step (256 or 512)
- * @sm_order: Smart Media byte order
+ * nand_ecc_sw_hamming_calculate - Calculate 3-byte ECC for 256/512-byte block
*
- * Detect and correct a 1 bit error for eccsize byte block
+ * @nand: NAND device
+ * @buf: Input buffer with raw data
+ * @code: Output buffer with ECC
*/
-int __nand_correct_data(unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc,
- unsigned int eccsize, bool sm_order)
+int nand_ecc_sw_hamming_calculate(struct nand_device *nand,
+ const unsigned char *buf, unsigned char *code)
{
+ struct nand_ecc_sw_hamming_conf *engine_conf = nand->ecc.ctx.priv;
+ unsigned int step_size = nand->ecc.ctx.conf.step_size;
+
+ return ecc_sw_hamming_calculate(buf, step_size, code,
+ engine_conf->sm_order);
+}
+EXPORT_SYMBOL(nand_ecc_sw_hamming_calculate);
+
+int ecc_sw_hamming_correct(unsigned char *buf, unsigned char *read_ecc,
+ unsigned char *calc_ecc, unsigned int step_size,
+ bool sm_order)
+{
+ const u32 eccsize_mult = step_size >> 8;
unsigned char b0, b1, b2, bit_addr;
unsigned int byte_addr;
- /* 256 or 512 bytes/ecc */
- const uint32_t eccsize_mult = eccsize >> 8;
/*
* b0 to b2 indicate which bit is faulty (if any)
@@ -458,27 +440,30 @@ int __nand_correct_data(unsigned char *buf,
pr_err("%s: uncorrectable ECC error\n", __func__);
return -EBADMSG;
}
-EXPORT_SYMBOL(__nand_correct_data);
+EXPORT_SYMBOL(ecc_sw_hamming_correct);
/**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @chip: NAND chip object
- * @buf: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
+ * nand_ecc_sw_hamming_correct - Detect and correct bit error(s)
*
- * Detect and correct a 1 bit error for 256/512 byte block
+ * @nand: NAND device
+ * @buf: Raw data read from the chip
+ * @read_ecc: ECC bytes read from the chip
+ * @calc_ecc: ECC calculated from the raw data
+ *
+ * Detect and correct up to 1 bit error per 256/512-byte block.
*/
-int nand_correct_data(struct nand_chip *chip, unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
+int nand_ecc_sw_hamming_correct(struct nand_device *nand, unsigned char *buf,
+ unsigned char *read_ecc,
+ unsigned char *calc_ecc)
{
- bool sm_order = chip->ecc.options & NAND_ECC_SOFT_HAMMING_SM_ORDER;
+ struct nand_ecc_sw_hamming_conf *engine_conf = nand->ecc.ctx.priv;
+ unsigned int step_size = nand->ecc.ctx.conf.step_size;
- return __nand_correct_data(buf, read_ecc, calc_ecc, chip->ecc.size,
- sm_order);
+ return ecc_sw_hamming_correct(buf, read_ecc, calc_ecc, step_size,
+ engine_conf->sm_order);
}
-EXPORT_SYMBOL(nand_correct_data);
+EXPORT_SYMBOL(nand_ecc_sw_hamming_correct);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Frans Meulenbroeks <fransmeulenbroeks@gmail.com>");
-MODULE_DESCRIPTION("Generic NAND ECC support");
+MODULE_DESCRIPTION("NAND software Hamming ECC support");
@@ -19,7 +19,6 @@
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
#include <linux/mtd/partitions.h>
#include <asm/msr.h>
@@ -215,7 +214,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
this->ecc.calculate = cs_calculate_ecc;
- this->ecc.correct = nand_correct_data;
+ this->ecc.correct = rawnand_sw_hamming_correct;
this->ecc.strength = 1;
/* Enable the following for a flash based bad block table */
@@ -900,7 +900,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
case NAND_HW_ECC_ENGINE:
dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
- nand->ecc.correct = nand_correct_data;
+ nand->ecc.correct = rawnand_sw_hamming_correct;
nand->ecc.bytes = 3;
nand->ecc.strength = 1;
nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
@@ -893,7 +893,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
chip->ecc.write_oob = lpc32xx_nand_write_oob_syndrome;
chip->ecc.read_oob = lpc32xx_nand_read_oob_syndrome;
chip->ecc.calculate = lpc32xx_nand_ecc_calculate;
- chip->ecc.correct = nand_correct_data;
+ chip->ecc.correct = rawnand_sw_hamming_correct;
chip->ecc.strength = 1;
chip->ecc.hwctl = lpc32xx_nand_ecc_enable;
@@ -4832,6 +4832,75 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
kfree(chip->parameters.onfi);
}
+int rawnand_sw_hamming_init(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_sw_hamming_conf *engine_conf;
+ struct nand_device *base = &chip->base;
+
+ base->ecc.user_conf.provider = NAND_SOFT_ECC_ENGINE;
+ base->ecc.user_conf.algo = NAND_ECC_HAMMING;
+ base->ecc.user_conf.strength = chip->ecc.strength;
+ base->ecc.user_conf.step_size = chip->ecc.size;
+
+ if (base->ecc.user_conf.strength != 1 ||
+ (base->ecc.user_conf.step_size != 256 &&
+ base->ecc.user_conf.step_size != 512)) {
+ pr_err("%s: unsupported strength or step size\n", __func__);
+ return -EINVAL;
+ }
+
+ engine_conf = kzalloc(sizeof(*engine_conf), GFP_KERNEL);
+ if (!engine_conf)
+ return -ENOMEM;
+
+ engine_conf->code_size = 3;
+ engine_conf->nsteps = mtd->writesize / base->ecc.user_conf.step_size;
+
+ if (chip->ecc.options & NAND_ECC_SOFT_HAMMING_SM_ORDER)
+ engine_conf->sm_order = true;
+
+ base->ecc.ctx.priv = engine_conf;
+
+ chip->ecc.size = base->ecc.ctx.conf.step_size;
+ chip->ecc.strength = base->ecc.ctx.conf.strength;
+ chip->ecc.total = base->ecc.ctx.total;
+ chip->ecc.steps = engine_conf->nsteps;
+ chip->ecc.bytes = engine_conf->code_size;
+
+ return 0;
+}
+EXPORT_SYMBOL(rawnand_sw_hamming_init);
+
+int rawnand_sw_hamming_calculate(struct nand_chip *chip,
+ const unsigned char *buf,
+ unsigned char *code)
+{
+ struct nand_device *base = &chip->base;
+
+ return nand_ecc_sw_hamming_calculate(base, buf, code);
+}
+EXPORT_SYMBOL(rawnand_sw_hamming_calculate);
+
+int rawnand_sw_hamming_correct(struct nand_chip *chip,
+ unsigned char *buf,
+ unsigned char *read_ecc,
+ unsigned char *calc_ecc)
+{
+ struct nand_device *base = &chip->base;
+
+ return nand_ecc_sw_hamming_correct(base, buf, read_ecc, calc_ecc);
+}
+EXPORT_SYMBOL(rawnand_sw_hamming_correct);
+
+void rawnand_sw_hamming_cleanup(struct nand_chip *chip)
+{
+ struct nand_device *base = &chip->base;
+
+ kfree(base->ecc.ctx.priv);
+}
+EXPORT_SYMBOL(rawnand_sw_hamming_cleanup);
+
int rawnand_sw_bch_init(struct nand_chip *chip)
{
struct nand_device *base = &chip->base;
@@ -4905,8 +4974,8 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
switch (ecc->algo) {
case NAND_ECC_HAMMING:
- ecc->calculate = nand_calculate_ecc;
- ecc->correct = nand_correct_data;
+ ecc->calculate = rawnand_sw_hamming_calculate;
+ ecc->correct = rawnand_sw_hamming_correct;
ecc->read_page = nand_read_page_swecc;
ecc->read_subpage = nand_read_subpage;
ecc->write_page = nand_write_page_swecc;
@@ -4922,6 +4991,12 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
if (IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC))
ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
+ ret = rawnand_sw_hamming_init(chip);
+ if (ret) {
+ WARN(1, "Hamming ECC initialization failed!\n");
+ return ret;
+ }
+
return 0;
case NAND_ECC_BCH:
if (!IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)) {
@@ -5697,9 +5772,12 @@ EXPORT_SYMBOL(nand_scan_with_ids);
*/
void nand_cleanup(struct nand_chip *chip)
{
- if (chip->ecc.mode == NAND_SOFT_ECC_ENGINE &&
- chip->ecc.algo == NAND_ECC_BCH)
- rawnand_sw_bch_cleanup(chip);
+ if (chip->ecc.mode == NAND_SOFT_ECC_ENGINE) {
+ if (chip->ecc.algo == NAND_ECC_HAMMING)
+ rawnand_sw_hamming_cleanup(chip);
+ else if (chip->ecc.algo == NAND_ECC_BCH)
+ rawnand_sw_bch_cleanup(chip);
+ }
/* Free bad block table memory */
kfree(chip->bbt);
@@ -18,7 +18,6 @@
*/
#include <linux/module.h>
#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/ndfc.h>
#include <linux/slab.h>
@@ -146,7 +145,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
chip->controller = &ndfc->ndfc_control;
chip->legacy.read_buf = ndfc_read_buf;
chip->legacy.write_buf = ndfc_write_buf;
- chip->ecc.correct = nand_correct_data;
+ chip->ecc.correct = ecc_sw_hamming_correct;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
chip->ecc.mode = NAND_HW_ECC_ENGINE;
@@ -164,7 +164,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
this->badblock_pattern = data->badblock_pattern;
this->ecc.hwctl = sharpsl_nand_enable_hwecc;
this->ecc.calculate = sharpsl_nand_calculate_ecc;
- this->ecc.correct = nand_correct_data;
+ this->ecc.correct = rawnand_sw_hamming_correct;
/* Scan to find existence of the device */
err = nand_scan(this, 1);
@@ -292,11 +292,11 @@ static int tmio_nand_correct_data(struct nand_chip *chip, unsigned char *buf,
int r0, r1;
/* assume ecc.size = 512 and ecc.bytes = 6 */
- r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256, false);
+ r0 = rawnand_sw_hamming_correct(chip, buf, read_ecc, calc_ecc);
if (r0 < 0)
return r0;
- r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256,
- false);
+ r1 = rawnand_sw_hamming_correct(chip, buf + 256, read_ecc + 3,
+ calc_ecc + 3);
if (r1 < 0)
return r1;
return r0 + r1;
@@ -194,8 +194,8 @@ static int txx9ndfmc_correct_data(struct nand_chip *chip, unsigned char *buf,
int stat;
for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
- stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256,
- false);
+ stat = rawnand_sw_hamming_correct(chip, buf, read_ecc,
+ calc_ecc);
if (stat < 0)
return stat;
corrected += stat;
@@ -216,20 +216,19 @@ static void sm_break_offset(struct sm_ftl *ftl, loff_t loffset,
static int sm_correct_sector(uint8_t *buffer, struct sm_oob *oob)
{
+ bool sm_order = IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC);
uint8_t ecc[3];
- __nand_calculate_ecc(buffer, SM_SMALL_PAGE, ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
- if (__nand_correct_data(buffer, ecc, oob->ecc1, SM_SMALL_PAGE,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC)) < 0)
+ ecc_sw_hamming_calculate(buffer, SM_SMALL_PAGE, ecc, sm_order);
+ if (ecc_sw_hamming_correct(buffer, ecc, oob->ecc1, SM_SMALL_PAGE,
+ sm_order) < 0)
return -EIO;
buffer += SM_SMALL_PAGE;
- __nand_calculate_ecc(buffer, SM_SMALL_PAGE, ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
- if (__nand_correct_data(buffer, ecc, oob->ecc2, SM_SMALL_PAGE,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC)) < 0)
+ ecc_sw_hamming_calculate(buffer, SM_SMALL_PAGE, ecc, sm_order);
+ if (ecc_sw_hamming_correct(buffer, ecc, oob->ecc2, SM_SMALL_PAGE,
+ sm_order) < 0)
return -EIO;
return 0;
}
@@ -368,6 +367,7 @@ static int sm_write_block(struct sm_ftl *ftl, uint8_t *buf,
int zone, int block, int lba,
unsigned long invalid_bitmap)
{
+ bool sm_order = IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC);
struct sm_oob oob;
int boffset;
int retry = 0;
@@ -394,13 +394,13 @@ static int sm_write_block(struct sm_ftl *ftl, uint8_t *buf,
}
if (ftl->smallpagenand) {
- __nand_calculate_ecc(buf + boffset, SM_SMALL_PAGE,
- oob.ecc1,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
+ ecc_sw_hamming_calculate(buf + boffset,
+ SM_SMALL_PAGE, oob.ecc1,
+ sm_order);
- __nand_calculate_ecc(buf + boffset + SM_SMALL_PAGE,
- SM_SMALL_PAGE, oob.ecc2,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
+ ecc_sw_hamming_calculate(buf + boffset + SM_SMALL_PAGE,
+ SM_SMALL_PAGE, oob.ecc2,
+ sm_order);
}
if (!sm_write_sector(ftl, zone, block, boffset,
buf + boffset, &oob))
@@ -119,13 +119,13 @@ static void no_bit_error(void *error_data, void *error_ecc,
static int no_bit_error_verify(void *error_data, void *error_ecc,
void *correct_data, const size_t size)
{
+ bool sm_order = IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC);
unsigned char calc_ecc[3];
int ret;
- __nand_calculate_ecc(error_data, size, calc_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
- ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
+ ecc_sw_hamming_calculate(error_data, size, calc_ecc, sm_order);
+ ret = ecc_sw_hamming_correct(error_data, error_ecc, calc_ecc, size,
+ sm_order);
if (ret == 0 && !memcmp(correct_data, error_data, size))
return 0;
@@ -149,13 +149,13 @@ static void single_bit_error_in_ecc(void *error_data, void *error_ecc,
static int single_bit_error_correct(void *error_data, void *error_ecc,
void *correct_data, const size_t size)
{
+ bool sm_order = IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC);
unsigned char calc_ecc[3];
int ret;
- __nand_calculate_ecc(error_data, size, calc_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
- ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
+ ecc_sw_hamming_calculate(error_data, size, calc_ecc, sm_order);
+ ret = ecc_sw_hamming_correct(error_data, error_ecc, calc_ecc, size,
+ sm_order);
if (ret == 1 && !memcmp(correct_data, error_data, size))
return 0;
@@ -186,13 +186,13 @@ static void double_bit_error_in_ecc(void *error_data, void *error_ecc,
static int double_bit_error_detect(void *error_data, void *error_ecc,
void *correct_data, const size_t size)
{
+ bool sm_order = IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC);
unsigned char calc_ecc[3];
int ret;
- __nand_calculate_ecc(error_data, size, calc_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
- ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
+ ecc_sw_hamming_calculate(error_data, size, calc_ecc, sm_order);
+ ret = ecc_sw_hamming_correct(error_data, error_ecc, calc_ecc, size,
+ sm_order);
return (ret == -EBADMSG) ? 0 : -EINVAL;
}
@@ -248,6 +248,7 @@ static void dump_data_ecc(void *error_data, void *error_ecc, void *correct_data,
static int nand_ecc_test_run(const size_t size)
{
+ bool sm_order = IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC);
int i;
int err = 0;
void *error_data;
@@ -266,9 +267,7 @@ static int nand_ecc_test_run(const size_t size)
}
prandom_bytes(correct_data, size);
- __nand_calculate_ecc(correct_data, size, correct_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
-
+ ecc_sw_hamming_calculate(correct_data, size, correct_ecc, sm_order);
for (i = 0; i < ARRAY_SIZE(nand_ecc_test); i++) {
nand_ecc_test[i].prepare(error_data, error_ecc,
correct_data, correct_ecc, size);
@@ -10,30 +10,36 @@
#ifndef __MTD_NAND_ECC_SW_HAMMING_H__
#define __MTD_NAND_ECC_SW_HAMMING_H__
-struct nand_chip;
+#include <linux/mtd/nand.h>
-/*
- * Calculate 3 byte ECC code for eccsize byte block
+/**
+ * struct nand_ecc_sw_hamming_conf - private software Hamming ECC engine structure
+ * @reqooblen: Save the actual user OOB length requested before overwriting it
+ * @code_size: Number of bytes needed to store a code (one code per step)
+ * @nsteps: Number of steps
+ * @calc_buf: Buffer to use when calculating ECC bytes
+ * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
+ * @sm_order: Smart Media special ordering
*/
-void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize,
- u_char *ecc_code, bool sm_order);
+struct nand_ecc_sw_hamming_conf {
+ unsigned int reqooblen;
+ unsigned int code_size;
+ unsigned int nsteps;
+ u8 *calc_buf;
+ u8 *code_buf;
+ unsigned int sm_order;
+};
-/*
- * Calculate 3 byte ECC code for 256/512 byte block
- */
-int nand_calculate_ecc(struct nand_chip *chip, const u_char *dat,
- u_char *ecc_code);
-
-/*
- * Detect and correct a 1 bit error for eccsize byte block
- */
-int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
- unsigned int eccsize, bool sm_order);
-
-/*
- * Detect and correct a 1 bit error for 256/512 byte block
- */
-int nand_correct_data(struct nand_chip *chip, u_char *dat, u_char *read_ecc,
- u_char *calc_ecc);
+int ecc_sw_hamming_calculate(const unsigned char *buf, unsigned int step_size,
+ unsigned char *code, bool sm_order);
+int nand_ecc_sw_hamming_calculate(struct nand_device *nand,
+ const unsigned char *buf,
+ unsigned char *code);
+int ecc_sw_hamming_correct(unsigned char *buf, unsigned char *read_ecc,
+ unsigned char *calc_ecc, unsigned int step_size,
+ bool sm_order);
+int nand_ecc_sw_hamming_correct(struct nand_device *nand, unsigned char *buf,
+ unsigned char *read_ecc,
+ unsigned char *calc_ecc);
#endif /* __MTD_NAND_ECC_SW_HAMMING_H__ */
@@ -1272,6 +1272,15 @@ static inline int nand_opcode_8bits(unsigned int command)
return 0;
}
+int rawnand_sw_hamming_init(struct nand_chip *chip);
+int rawnand_sw_hamming_calculate(struct nand_chip *chip,
+ const unsigned char *buf,
+ unsigned char *code);
+int rawnand_sw_hamming_correct(struct nand_chip *chip,
+ unsigned char *buf,
+ unsigned char *read_ecc,
+ unsigned char *calc_ecc);
+void rawnand_sw_hamming_cleanup(struct nand_chip *chip);
int rawnand_sw_bch_init(struct nand_chip *chip);
int rawnand_sw_bch_correct(struct nand_chip *chip, unsigned char *buf,
unsigned char *read_ecc, unsigned char *calc_ecc);
Add helpers in the raw NAND core to call the generic functions that will be re-used by the SPI-NAND layer. While at it, do some cleanup in the file and its header. There are two drivers (not even raw NAND controller drivers) using the bare helpers ecc_sw_hamming_calculate/correct(): mtd_nandecctest.c and sm_ftl.c. It would be nice to find another way to call these functions and finish to clean the driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/ecc-sw-hamming.c | 121 +++++++++++------------- drivers/mtd/nand/raw/cs553x_nand.c | 3 +- drivers/mtd/nand/raw/fsmc_nand.c | 2 +- drivers/mtd/nand/raw/lpc32xx_slc.c | 2 +- drivers/mtd/nand/raw/nand_base.c | 88 ++++++++++++++++- drivers/mtd/nand/raw/ndfc.c | 3 +- drivers/mtd/nand/raw/sharpsl.c | 2 +- drivers/mtd/nand/raw/tmio_nand.c | 6 +- drivers/mtd/nand/raw/txx9ndfmc.c | 4 +- drivers/mtd/sm_ftl.c | 28 +++--- drivers/mtd/tests/mtd_nandecctest.c | 29 +++--- include/linux/mtd/nand-ecc-sw-hamming.h | 50 +++++----- include/linux/mtd/rawnand.h | 9 ++ 13 files changed, 211 insertions(+), 136 deletions(-)