| Message ID | 20190923161411.9236-5-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/8] dt-bindings: timer: Convert Exynos MCT bindings to json-schema | expand |
On 23.09.2019 18:14, Krzysztof Kozlowski wrote: > Multi Core Timer node has interrupts routed to two different parents - > GIC and combiner. This was modeled with a interrupt-map within a > subnode but can be expressed in an easier and more common way, directly > in the node itself. > > Tested on Odroid U3 (Exynos4412). > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Works fine on Trats2 board. > --- > > Changes since v3: > 1. Use interrupts-extended instead of interrupts-map. > --- > arch/arm/boot/dts/exynos4412.dtsi | 19 +++++-------------- > 1 file changed, 5 insertions(+), 14 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi > index 8b6d5875c75d..9b5fb4e54d7c 100644 > --- a/arch/arm/boot/dts/exynos4412.dtsi > +++ b/arch/arm/boot/dts/exynos4412.dtsi > @@ -246,22 +246,13 @@ > timer@10050000 { > compatible = "samsung,exynos4412-mct"; > reg = <0x10050000 0x800>; > - interrupt-parent = <&mct_map>; > - interrupts = <0>, <1>, <2>, <3>, <4>; > clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; > clock-names = "fin_pll", "mct"; > - > - mct_map: mct-map { > - #interrupt-cells = <1>; > - #address-cells = <0>; > - #size-cells = <0>; > - interrupt-map = > - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, > - <1 &combiner 12 5>, > - <2 &combiner 12 6>, > - <3 &combiner 12 7>, > - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; > - }; > + interrupts-extended = <&gic 0 57 IRQ_TYPE_LEVEL_HIGH>, > + <&combiner 12 5>, > + <&combiner 12 6>, > + <&combiner 12 7>, > + <&gic 1 12 IRQ_TYPE_LEVEL_HIGH>; > }; > > watchdog: watchdog@10060000 { Best regards
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 8b6d5875c75d..9b5fb4e54d7c 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -246,22 +246,13 @@ timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 5>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic 1 12 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 {
Multi Core Timer node has interrupts routed to two different parents - GIC and combiner. This was modeled with a interrupt-map within a subnode but can be expressed in an easier and more common way, directly in the node itself. Tested on Odroid U3 (Exynos4412). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v3: 1. Use interrupts-extended instead of interrupts-map. --- arch/arm/boot/dts/exynos4412.dtsi | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-)