| Message ID | 20191016092255.19223-1-gilles.doffe@savoirfairelinux.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4] ARM: dts: imx6qdl-rex: add gpio expander pca9535 | expand |
On Wed, Oct 16, 2019 at 11:22:55AM +0200, Gilles DOFFE wrote: > The pca9535 gpio expander is present on the Rex baseboard, but missing > from the dtsi. > The pca9535 is on i2c2 bus which is common to the three SOM > variants (Basic/Pro/Ultra), thus it is activated by default. > > Add also the new gpio controller and the associated interrupt line > MX6QDL_PAD_NANDF_CS3__GPIO6_IO16. > > Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com> > --- > arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi > index 97f1659144ea..305b57fadc60 100644 > --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi > @@ -132,6 +132,19 @@ > pinctrl-0 = <&pinctrl_i2c2>; > status = "okay"; > > + pca9535: gpio-expander@27 { > + compatible = "nxp,pca9535"; > + reg = <0x27>; > + gpio-controller; > + #gpio-cells = <2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pca9535>; > + interrupt-parent = <&gpio6>; > + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > eeprom@57 { > compatible = "atmel,24c02"; > reg = <0x57>; > @@ -237,6 +250,12 @@ > >; > }; > > + pinctrl_pca9535: pca9535 { For sake of consistency, the node name should be prefixed with 'grp', which tells this is a pinctrl group node. I fixed it up and applied the patch. Shawn > + fsl,pins = < > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 > + >; > + }; > + > pinctrl_uart1: uart1grp { > fsl,pins = < > MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > -- > 2.20.1 >
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 97f1659144ea..305b57fadc60 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -132,6 +132,19 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + pca9535: gpio-expander@27 { + compatible = "nxp,pca9535"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9535>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + eeprom@57 { compatible = "atmel,24c02"; reg = <0x57>; @@ -237,6 +250,12 @@ >; }; + pinctrl_pca9535: pca9535 { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
The pca9535 gpio expander is present on the Rex baseboard, but missing from the dtsi. The pca9535 is on i2c2 bus which is common to the three SOM variants (Basic/Pro/Ultra), thus it is activated by default. Add also the new gpio controller and the associated interrupt line MX6QDL_PAD_NANDF_CS3__GPIO6_IO16. Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com> --- arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)