diff mbox series

[v2,05/11] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'

Message ID 20191029112655.15058-6-frieder.schrempf@kontron.de (mailing list archive)
State New, archived
Headers show
Series Add support for more Kontron i.MX6UL/ULL SoMs and boards | expand

Commit Message

Frieder Schrempf Oct. 29, 2019, 11:27 a.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The Kontron N6x1x SoMs all use uart4 as a debug serial interface.
Therefore we set in the 'chosen' node.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index a843e028bcde..a17af4d9bfdf 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -7,6 +7,12 @@ 
 
 #include <dt-bindings/gpio/gpio.h>
 
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
 &ecspi2 {
 	cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";