@@ -623,8 +623,8 @@ static int ucc_hdlc_poll(struct napi_struct *napi, int budget)
if (howmany < budget) {
napi_complete_done(napi, howmany);
- qe_setbits32(priv->uccf->p_uccm,
- (UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
+ qe_setbits_be32(priv->uccf->p_uccm,
+ (UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
}
return howmany;
@@ -540,8 +540,8 @@ int ucc_set_tdm_rxtx_clk(u32 tdm_num, enum qe_clock clock,
cmxs1cr = (tdm_num < 4) ? &qe_mux_reg->cmxsi1cr_l :
&qe_mux_reg->cmxsi1cr_h;
- qe_clrsetbits32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- clock_bits << shift);
+ qe_clrsetbits_be32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
return 0;
}
@@ -650,9 +650,9 @@ int ucc_set_tdm_rxtx_sync(u32 tdm_num, enum qe_clock clock,
shift = ucc_get_tdm_sync_shift(mode, tdm_num);
- qe_clrsetbits32(&qe_mux_reg->cmxsi1syr,
- QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- source << shift);
+ qe_clrsetbits_be32(&qe_mux_reg->cmxsi1syr,
+ QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ source << shift);
return 0;
}
@@ -241,20 +241,20 @@ static inline int qe_alive_during_sleep(void)
#define qe_muram_offset cpm_muram_offset
#define qe_muram_dma cpm_muram_dma
-#define qe_setbits32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr))
-#define qe_clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr))
+#define qe_clrbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
-#define qe_setbits16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr))
-#define qe_clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr))
+#define qe_clrbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
-#define qe_setbits8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr))
-#define qe_clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
+#define qe_setbits_8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr))
+#define qe_clrbits_8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
-#define qe_clrsetbits32(addr, clear, set) \
+#define qe_clrsetbits_be32(addr, clear, set) \
iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
-#define qe_clrsetbits16(addr, clear, set) \
+#define qe_clrsetbits_be16(addr, clear, set) \
iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
-#define qe_clrsetbits8(addr, clear, set) \
+#define qe_clrsetbits_8(addr, clear, set) \
iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
/* Structure that defines QE firmware binary files.
Make it clear that these operate on big-endian registers (i.e. use the iowrite*be primitives) before we introduce more uses of them and allow the QE drivers to be built for platforms other than ppc32. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> --- drivers/net/wan/fsl_ucc_hdlc.c | 4 ++-- drivers/soc/fsl/qe/ucc.c | 10 +++++----- include/soc/fsl/qe/qe.h | 18 +++++++++--------- 3 files changed, 16 insertions(+), 16 deletions(-)