diff mbox series

[v4,1/9] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file

Message ID 20191104115352.8728-2-frieder.schrempf@kontron.de (mailing list archive)
State New, archived
Headers show
Series Add support for more Kontron i.MX6UL/ULL SoMs and boards | expand

Commit Message

Frieder Schrempf Nov. 4, 2019, 11:53 a.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The Kontron N6311 and N6411 SoMs are very similar to N6310. In
preparation to add support for them, we move the common nodes to a
separate file imx6ul-kontron-n6x1x-som-common.dtsi.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../boot/dts/imx6ul-kontron-n6310-som.dtsi    |  95 +---------------
 .../dts/imx6ul-kontron-n6x1x-som-common.dtsi  | 103 ++++++++++++++++++
 2 files changed, 104 insertions(+), 94 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
index a896b2348dd2..47d3ce5d255f 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -6,7 +6,7 @@ 
  */
 
 #include "imx6ul.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "imx6ul-kontron-n6x1x-som-common.dtsi"
 
 / {
 	model = "Kontron N6310 SOM";
@@ -18,49 +18,7 @@ 
 	};
 };
 
-&ecspi2 {
-	cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	spi-flash@0 {
-		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&fec2 {
-	phy-mode = "rmii";
-	status = "disabled";
-};
-
 &qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
 	spi-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -81,54 +39,3 @@ 
 		};
 	};
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_out>;
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
-			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
-			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
-		>;
-	};
-
-	pinctrl_reset_out: rstoutgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
new file mode 100644
index 000000000000..a843e028bcde
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -0,0 +1,103 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+};