diff mbox series

[4/9] arm64: dts: ti: k3-am654-main: Add McASP nodes

Message ID 20191112143301.3168-5-peter.ujfalusi@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: UDMAP and McASP support | expand

Commit Message

Peter Ujfalusi Nov. 12, 2019, 2:32 p.m. UTC 
Add the nodes for McASP 0-2 and keep them disabled because several
required properties are not present as they are board specific.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 57 ++++++++++++++++++++++++
 1 file changed, 57 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index be841fc44b76..6dd28202a221 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -663,4 +663,61 @@  pcie1_ep: pcie-ep@5600000 {
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};
+
+	mcasp0: mcasp@02B00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02B00000 0x0 0x2000>,
+			<0x0 0x02B08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@02B10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02B10000 0x0 0x2000>,
+			<0x0 0x02B18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@02B20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02B20000 0x0 0x2000>,
+			<0x0 0x02B28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
 };