deleted file mode 100644
@@ -1,29 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter
-
-STM32 Low-Power Timer provides several counter modes. It can be used as:
-- quadrature encoder to detect angular position and direction of rotary
- elements, from IN1 and IN2 input signals.
-- simple counter from IN1 input signal.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required properties:
-- compatible: Must be "st,stm32-lptimer-counter".
-- pinctrl-names: Set to "default". An additional "sleep" state can be
- defined to set pins in sleep state.
-- pinctrl-n: List of phandles pointing to pin configuration nodes,
- to set IN1/IN2 pins in mode of operation for Low-Power
- Timer input on external pin.
-
-Example:
- timer@40002400 {
- compatible = "st,stm32-lptimer";
- ...
- counter {
- compatible = "st,stm32-lptimer-counter";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&lptim1_in_pins>;
- pinctrl-1 = <&lptim1_sleep_in_pins>;
- };
- };
deleted file mode 100644
@@ -1,23 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer Trigger
-
-STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used
-by STM32 internal ADC and/or DAC.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required properties:
-- compatible: Must be "st,stm32-lptimer-trigger".
-- reg: Identify trigger hardware block. Must be 0, 1 or 2
- respectively for lptimer1, lptimer2 or lptimer3
- trigger output.
-
-Example:
- timer@40002400 {
- compatible = "st,stm32-lptimer";
- ...
- trigger@0 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <0>;
- };
- };
new file mode 100644
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Low-Power Timers bindings
+
+description: |
+ The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
+ functions
+ - PWM output (with programmable prescaler, configurable polarity)
+ - Quadrature encoder, counter
+ - Trigger source for STM32 ADC/DAC (LPTIM_OUT)
+
+maintainers:
+ - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+properties:
+ compatible:
+ const: st,stm32-lptimer
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: mux
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ pwm:
+ type: object
+
+ properties:
+ compatible:
+ const: st,stm32-pwm-lp
+
+ "#pwm-cells":
+ const: 3
+
+ required:
+ - "#pwm-cells"
+ - compatible
+
+patternProperties:
+ "^trigger@[0-9]+$":
+ type: object
+
+ properties:
+ compatible:
+ const: st,stm32-lptimer-trigger
+
+ reg:
+ description: Identify trigger hardware block.
+ items:
+ minimum: 0
+ maximum: 3
+
+ required:
+ - compatible
+ - reg
+
+ counter:
+ type: object
+
+ properties:
+ compatible:
+ const: st,stm32-lptimer-counter
+
+ required:
+ - compatible
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ timer@40002400 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x40002400 0x400>;
+ clocks = <&timer_clk>;
+ clock-names = "mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ };
+ };
+
+...
deleted file mode 100644
@@ -1,48 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer
-
-The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
-functions:
-- PWM output (with programmable prescaler, configurable polarity)
-- Quadrature encoder, counter
-- Trigger source for STM32 ADC/DAC (LPTIM_OUT)
-
-Required properties:
-- compatible: Must be "st,stm32-lptimer".
-- reg: Offset and length of the device's register set.
-- clocks: Phandle to the clock used by the LP Timer module.
-- clock-names: Must be "mux".
-- #address-cells: Should be '<1>'.
-- #size-cells: Should be '<0>'.
-
-Optional subnodes:
-- pwm: See ../pwm/pwm-stm32-lp.txt
-- counter: See ../counter/stm32-lptimer-cnt.txt
-- trigger: See ../iio/timer/stm32-lptimer-trigger.txt
-
-Example:
-
- timer@40002400 {
- compatible = "st,stm32-lptimer";
- reg = <0x40002400 0x400>;
- clocks = <&timer_clk>;
- clock-names = "mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- pinctrl-names = "default";
- pinctrl-0 = <&lppwm1_pins>;
- };
-
- trigger@0 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <0>;
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- pinctrl-names = "default";
- pinctrl-0 = <&lptim1_in_pins>;
- };
- };
deleted file mode 100644
@@ -1,30 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer PWM
-
-STM32 Low-Power Timer provides single channel PWM.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required parameters:
-- compatible: Must be "st,stm32-pwm-lp".
-- #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells
- bindings defined in pwm.txt.
-
-Optional properties:
-- pinctrl-names: Set to "default". An additional "sleep" state can be
- defined to set pins in sleep state when in low power.
-- pinctrl-n: Phandle(s) pointing to pin configuration node for PWM,
- respectively for "default" and "sleep" states.
-
-Example:
- timer@40002400 {
- compatible = "st,stm32-lptimer";
- ...
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&lppwm1_pins>;
- pinctrl-1 = <&lppwm1_sleep_pins>;
- };
- };
Convert the STM32 low power timers binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- .../bindings/counter/stm32-lptimer-cnt.txt | 29 ----- .../bindings/iio/timer/stm32-lptimer-trigger.txt | 23 ---- .../devicetree/bindings/mfd/st,stm32-lptimer.yaml | 117 +++++++++++++++++++++ .../devicetree/bindings/mfd/stm32-lptimer.txt | 48 --------- .../devicetree/bindings/pwm/pwm-stm32-lp.txt | 30 ------ 5 files changed, 117 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/counter/stm32-lptimer-cnt.txt delete mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt create mode 100644 Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/stm32-lptimer.txt delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt