@@ -24,6 +24,9 @@
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
+ serial0 = &ux500_serial0;
+ serial1 = &ux500_serial1;
+ serial2 = &ux500_serial2;
};
chosen {
@@ -13,13 +13,6 @@
model = "ST-Ericsson HREF (pre-v60) and ST UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
@@ -10,11 +10,4 @@
/ {
model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
};
@@ -15,13 +15,6 @@
model = "ST-Ericsson HREF (v60+) and ST UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
@@ -12,11 +12,4 @@
/ {
model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
};
@@ -12,13 +12,6 @@
model = "Calao Systems Snowball platform with device tree";
compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
- /* This stablilizes the serial port enumeration */
- aliases {
- serial0 = &ux500_serial0;
- serial1 = &ux500_serial1;
- serial2 = &ux500_serial2;
- };
-
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
Now that we have aliases for I2C and SPI in ste-dbx5x0.dtsi, it does not make much sense to keep only the aliases for UART separately in each board device tree. Considering that all boards set the same aliases for the serial ports there is no reason to keep them separated either. Move them to ste-dbx5x0.dtsi and remove the aliases from the board-specific device tree parts. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 3 +++ arch/arm/boot/dts/ste-hrefprev60-stuib.dts | 7 ------- arch/arm/boot/dts/ste-hrefprev60-tvk.dts | 7 ------- arch/arm/boot/dts/ste-hrefv60plus-stuib.dts | 7 ------- arch/arm/boot/dts/ste-hrefv60plus-tvk.dts | 7 ------- arch/arm/boot/dts/ste-snowball.dts | 7 ------- 6 files changed, 3 insertions(+), 35 deletions(-)