| Message ID | 20191128140146.29837-1-katsuhiro@katsuster.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards | expand |
On Thu, Nov 28, 2019 at 6:02 AM Katsuhiro Suzuki <katsuhiro@katsuster.net> wrote: > > This patch splits rk3399-rockpro64 dts file to 2 files for v2 and > v2.1 boards. > > Both v2 and v2.1 boards can use almost same settings but we find a > difference in I2C address of audio CODEC ES8136. > > Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> > Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> > > --- > > Changes in v2: > - Use rk3399-rockpro64.dts for for v2.1 instead of creating > rk3399-rockpro64-v2.1.dts > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3399-rockpro64-v2.dts | 30 + > .../boot/dts/rockchip/rk3399-rockpro64.dts | 757 +---------------- > .../boot/dts/rockchip/rk3399-rockpro64.dtsi | 763 ++++++++++++++++++ > 4 files changed, 797 insertions(+), 754 deletions(-) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 48fb631d5451..ee67175f3e78 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts > new file mode 100644 > index 000000000000..5457266036b7 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts > @@ -0,0 +1,30 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> > + */ > + > +/dts-v1/; > +#include "rk3399-rockpro64.dtsi" > + > +/ { > + model = "Pine64 RockPro64 v2.0"; > + compatible = "pine64,rockpro64", "rockchip,rk3399"; Since boards have limited compatibility due to different audiocodec address it should be: compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399"; > +}; > + > +&i2c1 { > + es8316: codec@10 { > + compatible = "everest,es8316"; > + reg = <0x10>; > + clocks = <&cru SCLK_I2S_8CH_OUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + > + port { > + es8316_p0_0: endpoint { > + remote-endpoint = <&i2s1_p0_0>; > + }; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts > index 7f4b2eba31d4..9450207bedad 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts > @@ -2,481 +2,18 @@ > /* > * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> > */ > > /dts-v1/; > -#include <dt-bindings/input/linux-event-codes.h> > -#include <dt-bindings/pwm/pwm.h> > -#include "rk3399.dtsi" > -#include "rk3399-opp.dtsi" > +#include "rk3399-rockpro64.dtsi" > > / { > - model = "Pine64 RockPro64"; > + model = "Pine64 RockPro64 v2.1"; > compatible = "pine64,rockpro64", "rockchip,rk3399"; I think it makes sense to add "pine64,rockpro64-v2.1" here as well, i.e. it should be: compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; > - > - chosen { > - stdout-path = "serial2:1500000n8"; > - }; > - > - clkin_gmac: external-gmac-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "clkin_gmac"; > - #clock-cells = <0>; > - }; > - > - gpio-keys { > - compatible = "gpio-keys"; > - autorepeat; > - pinctrl-names = "default"; > - pinctrl-0 = <&pwrbtn>; > - > - power { > - debounce-interval = <100>; > - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > - label = "GPIO Key Power"; > - linux,code = <KEY_POWER>; > - wakeup-source; > - }; > - }; > - > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > - > - work-led { > - label = "work"; > - default-state = "on"; > - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > - }; > - > - diy-led { > - label = "diy"; > - default-state = "off"; > - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > - fan: pwm-fan { > - compatible = "pwm-fan"; > - #cooling-cells = <2>; > - fan-supply = <&vcc12v_dcin>; > - pwms = <&pwm1 0 50000 0>; > - }; > - > - sdio_pwrseq: sdio-pwrseq { > - compatible = "mmc-pwrseq-simple"; > - clocks = <&rk808 1>; > - clock-names = "ext_clock"; > - pinctrl-names = "default"; > - pinctrl-0 = <&wifi_enable_h>; > - > - /* > - * On the module itself this is one of these (depending > - * on the actual card populated): > - * - SDIO_RESET_L_WL_REG_ON > - * - PDN (power down when low) > - */ > - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > - }; > - > - sound { > - compatible = "audio-graph-card"; > - label = "rockchip,rk3399"; > - dais = <&i2s1_p0>; > - }; > - > - vcc12v_dcin: vcc12v-dcin { > - compatible = "regulator-fixed"; > - regulator-name = "vcc12v_dcin"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - /* switched by pmic_sleep */ > - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > - compatible = "regulator-fixed"; > - regulator-name = "vcc1v8_s3"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_1v8>; > - }; > - > - vcc3v3_pcie: vcc3v3-pcie-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_pwr_en>; > - regulator-name = "vcc3v3_pcie"; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc3v3_sys: vcc3v3-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc5v0_sys>; > - }; > - > - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > - vcc5v0_host: vcc5v0-host-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_host_en>; > - regulator-name = "vcc5v0_host"; > - regulator-always-on; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_typec: vcc5v0-typec-regulator { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_typec_en>; > - regulator-name = "vcc5v0_typec"; > - regulator-always-on; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_sys: vcc5v0-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vcc5v0_usb: vcc5v0-usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc12v_dcin>; > - }; > - > - vdd_log: vdd-log { > - compatible = "pwm-regulator"; > - pwms = <&pwm2 0 25000 1>; > - regulator-name = "vdd_log"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1700000>; > - vin-supply = <&vcc5v0_sys>; > - }; > -}; > - > -&cpu_l0 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_l1 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_l2 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_l3 { > - cpu-supply = <&vdd_cpu_l>; > -}; > - > -&cpu_b0 { > - cpu-supply = <&vdd_cpu_b>; > -}; > - > -&cpu_b1 { > - cpu-supply = <&vdd_cpu_b>; > -}; > - > -&emmc_phy { > - status = "okay"; > -}; > - > -&gmac { > - assigned-clocks = <&cru SCLK_RMII_SRC>; > - assigned-clock-parents = <&clkin_gmac>; > - clock_in_out = "input"; > - phy-supply = <&vcc_lan>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&rgmii_pins>; > - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - snps,reset-delays-us = <0 10000 50000>; > - tx_delay = <0x28>; > - rx_delay = <0x11>; > - status = "okay"; > -}; > - > -&hdmi { > - ddc-i2c-bus = <&i2c3>; > - pinctrl-names = "default"; > - pinctrl-0 = <&hdmi_cec>; > - status = "okay"; > -}; > - > -&hdmi_sound { > - status = "okay"; > -}; > - > -&gpu { > - mali-supply = <&vdd_gpu>; > - status = "okay"; > -}; > - > -&i2c0 { > - clock-frequency = <400000>; > - i2c-scl-rising-time-ns = <168>; > - i2c-scl-falling-time-ns = <4>; > - status = "okay"; > - > - rk808: pmic@1b { > - compatible = "rockchip,rk808"; > - reg = <0x1b>; > - interrupt-parent = <&gpio3>; > - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > - #clock-cells = <1>; > - clock-output-names = "xin32k", "rk808-clkout2"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int_l>; > - rockchip,system-power-controller; > - wakeup-source; > - > - vcc1-supply = <&vcc5v0_sys>; > - vcc2-supply = <&vcc5v0_sys>; > - vcc3-supply = <&vcc5v0_sys>; > - vcc4-supply = <&vcc5v0_sys>; > - vcc6-supply = <&vcc5v0_sys>; > - vcc7-supply = <&vcc5v0_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc5v0_sys>; > - vcc10-supply = <&vcc5v0_sys>; > - vcc11-supply = <&vcc5v0_sys>; > - vcc12-supply = <&vcc3v3_sys>; > - vddio-supply = <&vcca_1v8>; > - > - regulators { > - vdd_center: DCDC_REG1 { > - regulator-name = "vdd_center"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <750000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_cpu_l: DCDC_REG2 { > - regulator-name = "vdd_cpu_l"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <750000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG4 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc1v8_dvp: LDO_REG1 { > - regulator-name = "vcc1v8_dvp"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v0_touch: LDO_REG2 { > - regulator-name = "vcc3v0_touch"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca_1v8: LDO_REG3 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcc_sdio: LDO_REG4 { > - regulator-name = "vcc_sdio"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3000000>; > - }; > - }; > - > - vcca3v0_codec: LDO_REG5 { > - regulator-name = "vcca3v0_codec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v5: LDO_REG6 { > - regulator-name = "vcc_1v5"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1500000>; > - regulator-max-microvolt = <1500000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1500000>; > - }; > - }; > - > - vcca1v8_codec: LDO_REG7 { > - regulator-name = "vcca1v8_codec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v0: LDO_REG8 { > - regulator-name = "vcc_3v0"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3000000>; > - }; > - }; > - > - vcc3v3_s3: vcc_lan: SWITCH_REG1 { > - regulator-name = "vcc3v3_s3"; > - regulator-always-on; > - regulator-boot-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_s0: SWITCH_REG2 { > - regulator-name = "vcc3v3_s0"; > - regulator-always-on; > - regulator-boot-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > - > - vdd_cpu_b: regulator@40 { > - compatible = "silergy,syr827"; > - reg = <0x40>; > - fcs,suspend-voltage-selector = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vsel1_gpio>; > - regulator-name = "vdd_cpu_b"; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1500000>; > - regulator-ramp-delay = <1000>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: regulator@41 { > - compatible = "silergy,syr828"; > - reg = <0x41>; > - fcs,suspend-voltage-selector = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vsel2_gpio>; > - regulator-name = "vdd_gpu"; > - regulator-min-microvolt = <712500>; > - regulator-max-microvolt = <1500000>; > - regulator-ramp-delay = <1000>; > - regulator-always-on; > - regulator-boot-on; > - vin-supply = <&vcc5v0_sys>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > }; > > &i2c1 { > - i2c-scl-rising-time-ns = <300>; > - i2c-scl-falling-time-ns = <15>; > - status = "okay"; > - > es8316: codec@11 { > compatible = "everest,es8316"; > reg = <0x11>; > @@ -491,291 +28,3 @@ es8316_p0_0: endpoint { > }; > }; > }; > - > -&i2c3 { > - i2c-scl-rising-time-ns = <450>; > - i2c-scl-falling-time-ns = <15>; > - status = "okay"; > -}; > - > -&i2c4 { > - i2c-scl-rising-time-ns = <600>; > - i2c-scl-falling-time-ns = <20>; > - status = "okay"; > - > - fusb0: typec-portc@22 { > - compatible = "fcs,fusb302"; > - reg = <0x22>; > - interrupt-parent = <&gpio1>; > - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > - pinctrl-names = "default"; > - pinctrl-0 = <&fusb0_int>; > - vbus-supply = <&vcc5v0_typec>; > - status = "okay"; > - }; > -}; > - > -&i2s0 { > - rockchip,playback-channels = <8>; > - rockchip,capture-channels = <8>; > - status = "okay"; > -}; > - > -&i2s1 { > - rockchip,playback-channels = <2>; > - rockchip,capture-channels = <2>; > - status = "okay"; > - > - i2s1_p0: port { > - i2s1_p0_0: endpoint { > - dai-format = "i2s"; > - mclk-fs = <256>; > - remote-endpoint = <&es8316_p0_0>; > - }; > - }; > -}; > - > -&i2s2 { > - status = "okay"; > -}; > - > -&io_domains { > - status = "okay"; > - > - bt656-supply = <&vcc1v8_dvp>; > - audio-supply = <&vcc_3v0>; > - sdmmc-supply = <&vcc_sdio>; > - gpio1830-supply = <&vcc_3v0>; > -}; > - > -&pcie0 { > - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; > - num-lanes = <4>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pcie_perst>; > - vpcie12v-supply = <&vcc12v_dcin>; > - vpcie3v3-supply = <&vcc3v3_pcie>; > - status = "okay"; > -}; > - > -&pcie_phy { > - status = "okay"; > -}; > - > -&pmu_io_domains { > - pmu1830-supply = <&vcc_3v0>; > - status = "okay"; > -}; > - > -&pinctrl { > - buttons { > - pwrbtn: pwrbtn { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - fusb302x { > - fusb0_int: fusb0-int { > - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - leds { > - work_led_gpio: work_led-gpio { > - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - diy_led_gpio: diy_led-gpio { > - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pcie { > - pcie_perst: pcie-perst { > - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - pcie_pwr_en: pcie-pwr-en { > - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int_l: pmic-int-l { > - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - > - vsel1_gpio: vsel1-gpio { > - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - > - vsel2_gpio: vsel2-gpio { > - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > - }; > - }; > - > - sdio-pwrseq { > - wifi_enable_h: wifi-enable-h { > - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - usb-typec { > - vcc5v0_typec_en: vcc5v0_typec_en { > - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - }; > - > - usb2 { > - vcc5v0_host_en: vcc5v0-host-en { > - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pwm0 { > - status = "okay"; > -}; > - > -&pwm1 { > - status = "okay"; > -}; > - > -&pwm2 { > - status = "okay"; > -}; > - > -&saradc { > - vref-supply = <&vcca1v8_s3>; > - status = "okay"; > -}; > - > -&sdmmc { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > - disable-wp; > - max-frequency = <150000000>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > - status = "okay"; > -}; > - > -&sdhci { > - bus-width = <8>; > - mmc-hs200-1_8v; > - non-removable; > - status = "okay"; > -}; > - > -&spi1 { > - status = "okay"; > - > - flash@0 { > - compatible = "jedec,spi-nor"; > - reg = <0>; > - spi-max-frequency = <10000000>; > - }; > -}; > - > -&tcphy0 { > - status = "okay"; > -}; > - > -&tcphy1 { > - status = "okay"; > -}; > - > -&tsadc { > - /* tshut mode 0:CRU 1:GPIO */ > - rockchip,hw-tshut-mode = <1>; > - /* tshut polarity 0:LOW 1:HIGH */ > - rockchip,hw-tshut-polarity = <1>; > - status = "okay"; > -}; > - > -&u2phy0 { > - status = "okay"; > - > - u2phy0_otg: otg-port { > - status = "okay"; > - }; > - > - u2phy0_host: host-port { > - phy-supply = <&vcc5v0_host>; > - status = "okay"; > - }; > -}; > - > -&u2phy1 { > - status = "okay"; > - > - u2phy1_otg: otg-port { > - status = "okay"; > - }; > - > - u2phy1_host: host-port { > - phy-supply = <&vcc5v0_host>; > - status = "okay"; > - }; > -}; > - > -&uart0 { > - pinctrl-names = "default"; > - pinctrl-0 = <&uart0_xfer &uart0_cts>; > - status = "okay"; > -}; > - > -&uart2 { > - status = "okay"; > -}; > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > -&usbdrd3_0 { > - status = "okay"; > -}; > - > -&usbdrd_dwc3_0 { > - status = "okay"; > - dr_mode = "otg"; > -}; > - > -&usbdrd3_1 { > - status = "okay"; > -}; > - > -&usbdrd_dwc3_1 { > - status = "okay"; > - dr_mode = "host"; > -}; > - > -&vopb { > - status = "okay"; > -}; > - > -&vopb_mmu { > - status = "okay"; > -}; > - > -&vopl { > - status = "okay"; > -}; > - > -&vopl_mmu { > - status = "okay"; > -}; > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi > new file mode 100644 > index 000000000000..183eda4ffb9c > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi > @@ -0,0 +1,763 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > + */ > + > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/pwm/pwm.h> > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn>; > + > + power { > + debounce-interval = <100>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "GPIO Key Power"; > + linux,code = <KEY_POWER>; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > + > + work-led { > + label = "work"; > + default-state = "on"; > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + }; > + > + diy-led { > + label = "diy"; > + default-state = "off"; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + fan: pwm-fan { > + compatible = "pwm-fan"; > + #cooling-cells = <2>; > + fan-supply = <&vcc12v_dcin>; > + pwms = <&pwm1 0 50000 0>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h>; > + > + /* > + * On the module itself this is one of these (depending > + * on the actual card populated): > + * - SDIO_RESET_L_WL_REG_ON > + * - PDN (power down when low) > + */ > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + sound { > + compatible = "audio-graph-card"; > + label = "rockchip,rk3399"; > + dais = <&i2s1_p0>; > + }; > + > + vcc12v_dcin: vcc12v-dcin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc12v_dcin"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > + vcc3v3_pcie: vcc3v3-pcie-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_pwr_en>; > + regulator-name = "vcc3v3_pcie"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + vin-supply = <&vcc5v0_usb>; > + }; > + > + vcc5v0_typec: vcc5v0-typec-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_typec_en>; > + regulator-name = "vcc5v0_typec"; > + regulator-always-on; > + vin-supply = <&vcc5v0_usb>; > + }; > + > + vcc5v0_sys: vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vcc5v0_usb: vcc5v0-usb { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_usb"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc12v_dcin>; > + }; > + > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1700000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc_lan>; > + phy-mode = "rgmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_cec>; > + status = "okay"; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio3>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc5v0_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcca_1v8>; > + > + regulators { > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v0_touch: LDO_REG2 { > + regulator-name = "vcc3v0_touch"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca_1v8: LDO_REG3 { > + regulator-name = "vcca_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: vcc_lan: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel1_gpio>; > + regulator-name = "vdd_cpu_b"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel2_gpio>; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c1 { > + i2c-scl-rising-time-ns = <300>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&i2c3 { > + i2c-scl-rising-time-ns = <450>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&i2c4 { > + i2c-scl-rising-time-ns = <600>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + > + fusb0: typec-portc@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + interrupt-parent = <&gpio1>; > + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&fusb0_int>; > + vbus-supply = <&vcc5v0_typec>; > + status = "okay"; > + }; > +}; > + > +&i2s0 { > + rockchip,playback-channels = <8>; > + rockchip,capture-channels = <8>; > + status = "okay"; > +}; > + > +&i2s1 { > + rockchip,playback-channels = <2>; > + rockchip,capture-channels = <2>; > + status = "okay"; > + > + i2s1_p0: port { > + i2s1_p0_0: endpoint { > + dai-format = "i2s"; > + mclk-fs = <256>; > + remote-endpoint = <&es8316_p0_0>; > + }; > + }; > +}; > + > +&i2s2 { > + status = "okay"; > +}; > + > +&io_domains { > + status = "okay"; > + > + bt656-supply = <&vcc1v8_dvp>; > + audio-supply = <&vcc_3v0>; > + sdmmc-supply = <&vcc_sdio>; > + gpio1830-supply = <&vcc_3v0>; > +}; > + > +&pcie0 { > + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; > + num-lanes = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_perst>; > + vpcie12v-supply = <&vcc12v_dcin>; > + vpcie3v3-supply = <&vcc3v3_pcie>; > + status = "okay"; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pinctrl { > + buttons { > + pwrbtn: pwrbtn { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + fusb302x { > + fusb0_int: fusb0-int { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + work_led_gpio: work_led-gpio { > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + diy_led_gpio: diy_led-gpio { > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie { > + pcie_perst: pcie-perst { > + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + pcie_pwr_en: pcie-pwr-en { > + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + sdio-pwrseq { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + vcc5v0_typec_en: vcc5v0_typec_en { > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca1v8_s3>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > + disable-wp; > + max-frequency = <150000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + status = "okay"; > +}; > + > +&spi1 { > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <10000000>; > + }; > +}; > + > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + status = "okay"; > + dr_mode = "otg"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +}; > -- > 2.24.0 >
Hello Vasily, On 2019/11/29 4:19, Vasily Khoruzhick wrote: > On Thu, Nov 28, 2019 at 6:02 AM Katsuhiro Suzuki > <katsuhiro@katsuster.net> wrote: >> >> This patch splits rk3399-rockpro64 dts file to 2 files for v2 and >> v2.1 boards. >> >> Both v2 and v2.1 boards can use almost same settings but we find a >> difference in I2C address of audio CODEC ES8136. >> >> Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> >> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> >> >> --- >> >> Changes in v2: >> - Use rk3399-rockpro64.dts for for v2.1 instead of creating >> rk3399-rockpro64-v2.1.dts >> --- (...snip...) >> +/dts-v1/; >> +#include "rk3399-rockpro64.dtsi" >> + >> +/ { >> + model = "Pine64 RockPro64 v2.0"; >> + compatible = "pine64,rockpro64", "rockchip,rk3399"; > > Since boards have limited compatibility due to different audiocodec > address it should be: > > compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399"; > >> +}; >> + >> +&i2c1 { >> + es8316: codec@10 { >> + compatible = "everest,es8316"; >> + reg = <0x10>; >> + clocks = <&cru SCLK_I2S_8CH_OUT>; >> + clock-names = "mclk"; >> + #sound-dai-cells = <0>; >> + >> + port { >> + es8316_p0_0: endpoint { >> + remote-endpoint = <&i2s1_p0_0>; >> + }; >> + }; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts >> index 7f4b2eba31d4..9450207bedad 100644 >> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts >> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts >> @@ -2,481 +2,18 @@ >> /* >> * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. >> * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> >> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> >> */ >> >> /dts-v1/; >> -#include <dt-bindings/input/linux-event-codes.h> >> -#include <dt-bindings/pwm/pwm.h> >> -#include "rk3399.dtsi" >> -#include "rk3399-opp.dtsi" >> +#include "rk3399-rockpro64.dtsi" >> >> / { >> - model = "Pine64 RockPro64"; >> + model = "Pine64 RockPro64 v2.1"; >> compatible = "pine64,rockpro64", "rockchip,rk3399"; > > I think it makes sense to add "pine64,rockpro64-v2.1" here as well, > i.e. it should be: > > compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; > Thank you for review! I'll fix and post v3 patch. Best Regards, Katsuhiro Suzuki >> - >> - chosen { >> - stdout-path = "serial2:1500000n8"; >> - }; >> - >> - clkin_gmac: external-gmac-clock { >> - compatible = "fixed-clock"; >> - clock-frequency = <125000000>; >> - clock-output-names = "clkin_gmac"; >> - #clock-cells = <0>; >> - }; >> - >> - gpio-keys { >> - compatible = "gpio-keys"; >> - autorepeat; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&pwrbtn>; >> - >> - power { >> - debounce-interval = <100>; >> - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; >> - label = "GPIO Key Power"; >> - linux,code = <KEY_POWER>; >> - wakeup-source; >> - }; >> - }; >> - >> - leds { >> - compatible = "gpio-leds"; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; >> - >> - work-led { >> - label = "work"; >> - default-state = "on"; >> - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; >> - }; >> - >> - diy-led { >> - label = "diy"; >> - default-state = "off"; >> - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; >> - }; >> - }; >> - >> - fan: pwm-fan { >> - compatible = "pwm-fan"; >> - #cooling-cells = <2>; >> - fan-supply = <&vcc12v_dcin>; >> - pwms = <&pwm1 0 50000 0>; >> - }; >> - >> - sdio_pwrseq: sdio-pwrseq { >> - compatible = "mmc-pwrseq-simple"; >> - clocks = <&rk808 1>; >> - clock-names = "ext_clock"; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&wifi_enable_h>; >> - >> - /* >> - * On the module itself this is one of these (depending >> - * on the actual card populated): >> - * - SDIO_RESET_L_WL_REG_ON >> - * - PDN (power down when low) >> - */ >> - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; >> - }; >> - >> - sound { >> - compatible = "audio-graph-card"; >> - label = "rockchip,rk3399"; >> - dais = <&i2s1_p0>; >> - }; >> - >> - vcc12v_dcin: vcc12v-dcin { >> - compatible = "regulator-fixed"; >> - regulator-name = "vcc12v_dcin"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <12000000>; >> - regulator-max-microvolt = <12000000>; >> - }; >> - >> - /* switched by pmic_sleep */ >> - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { >> - compatible = "regulator-fixed"; >> - regulator-name = "vcc1v8_s3"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1800000>; >> - regulator-max-microvolt = <1800000>; >> - vin-supply = <&vcc_1v8>; >> - }; >> - >> - vcc3v3_pcie: vcc3v3-pcie-regulator { >> - compatible = "regulator-fixed"; >> - enable-active-high; >> - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&pcie_pwr_en>; >> - regulator-name = "vcc3v3_pcie"; >> - regulator-always-on; >> - regulator-boot-on; >> - vin-supply = <&vcc12v_dcin>; >> - }; >> - >> - vcc3v3_sys: vcc3v3-sys { >> - compatible = "regulator-fixed"; >> - regulator-name = "vcc3v3_sys"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <3300000>; >> - regulator-max-microvolt = <3300000>; >> - vin-supply = <&vcc5v0_sys>; >> - }; >> - >> - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ >> - vcc5v0_host: vcc5v0-host-regulator { >> - compatible = "regulator-fixed"; >> - enable-active-high; >> - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&vcc5v0_host_en>; >> - regulator-name = "vcc5v0_host"; >> - regulator-always-on; >> - vin-supply = <&vcc5v0_usb>; >> - }; >> - >> - vcc5v0_typec: vcc5v0-typec-regulator { >> - compatible = "regulator-fixed"; >> - enable-active-high; >> - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&vcc5v0_typec_en>; >> - regulator-name = "vcc5v0_typec"; >> - regulator-always-on; >> - vin-supply = <&vcc5v0_usb>; >> - }; >> - >> - vcc5v0_sys: vcc5v0-sys { >> - compatible = "regulator-fixed"; >> - regulator-name = "vcc5v0_sys"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <5000000>; >> - regulator-max-microvolt = <5000000>; >> - vin-supply = <&vcc12v_dcin>; >> - }; >> - >> - vcc5v0_usb: vcc5v0-usb { >> - compatible = "regulator-fixed"; >> - regulator-name = "vcc5v0_usb"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <5000000>; >> - regulator-max-microvolt = <5000000>; >> - vin-supply = <&vcc12v_dcin>; >> - }; >> - >> - vdd_log: vdd-log { >> - compatible = "pwm-regulator"; >> - pwms = <&pwm2 0 25000 1>; >> - regulator-name = "vdd_log"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <800000>; >> - regulator-max-microvolt = <1700000>; >> - vin-supply = <&vcc5v0_sys>; >> - }; >> -}; >> - >> -&cpu_l0 { >> - cpu-supply = <&vdd_cpu_l>; >> -}; >> - >> -&cpu_l1 { >> - cpu-supply = <&vdd_cpu_l>; >> -}; >> - >> -&cpu_l2 { >> - cpu-supply = <&vdd_cpu_l>; >> -}; >> - >> -&cpu_l3 { >> - cpu-supply = <&vdd_cpu_l>; >> -}; >> - >> -&cpu_b0 { >> - cpu-supply = <&vdd_cpu_b>; >> -}; >> - >> -&cpu_b1 { >> - cpu-supply = <&vdd_cpu_b>; >> -}; >> - >> -&emmc_phy { >> - status = "okay"; >> -}; >> - >> -&gmac { >> - assigned-clocks = <&cru SCLK_RMII_SRC>; >> - assigned-clock-parents = <&clkin_gmac>; >> - clock_in_out = "input"; >> - phy-supply = <&vcc_lan>; >> - phy-mode = "rgmii"; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&rgmii_pins>; >> - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; >> - snps,reset-active-low; >> - snps,reset-delays-us = <0 10000 50000>; >> - tx_delay = <0x28>; >> - rx_delay = <0x11>; >> - status = "okay"; >> -}; >> - >> -&hdmi { >> - ddc-i2c-bus = <&i2c3>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&hdmi_cec>; >> - status = "okay"; >> -}; >> - >> -&hdmi_sound { >> - status = "okay"; >> -}; >> - >> -&gpu { >> - mali-supply = <&vdd_gpu>; >> - status = "okay"; >> -}; >> - >> -&i2c0 { >> - clock-frequency = <400000>; >> - i2c-scl-rising-time-ns = <168>; >> - i2c-scl-falling-time-ns = <4>; >> - status = "okay"; >> - >> - rk808: pmic@1b { >> - compatible = "rockchip,rk808"; >> - reg = <0x1b>; >> - interrupt-parent = <&gpio3>; >> - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; >> - #clock-cells = <1>; >> - clock-output-names = "xin32k", "rk808-clkout2"; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&pmic_int_l>; >> - rockchip,system-power-controller; >> - wakeup-source; >> - >> - vcc1-supply = <&vcc5v0_sys>; >> - vcc2-supply = <&vcc5v0_sys>; >> - vcc3-supply = <&vcc5v0_sys>; >> - vcc4-supply = <&vcc5v0_sys>; >> - vcc6-supply = <&vcc5v0_sys>; >> - vcc7-supply = <&vcc5v0_sys>; >> - vcc8-supply = <&vcc3v3_sys>; >> - vcc9-supply = <&vcc5v0_sys>; >> - vcc10-supply = <&vcc5v0_sys>; >> - vcc11-supply = <&vcc5v0_sys>; >> - vcc12-supply = <&vcc3v3_sys>; >> - vddio-supply = <&vcca_1v8>; >> - >> - regulators { >> - vdd_center: DCDC_REG1 { >> - regulator-name = "vdd_center"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <750000>; >> - regulator-max-microvolt = <1350000>; >> - regulator-ramp-delay = <6001>; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vdd_cpu_l: DCDC_REG2 { >> - regulator-name = "vdd_cpu_l"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <750000>; >> - regulator-max-microvolt = <1350000>; >> - regulator-ramp-delay = <6001>; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vcc_ddr: DCDC_REG3 { >> - regulator-name = "vcc_ddr"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-state-mem { >> - regulator-on-in-suspend; >> - }; >> - }; >> - >> - vcc_1v8: DCDC_REG4 { >> - regulator-name = "vcc_1v8"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1800000>; >> - regulator-max-microvolt = <1800000>; >> - regulator-state-mem { >> - regulator-on-in-suspend; >> - regulator-suspend-microvolt = <1800000>; >> - }; >> - }; >> - >> - vcc1v8_dvp: LDO_REG1 { >> - regulator-name = "vcc1v8_dvp"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1800000>; >> - regulator-max-microvolt = <1800000>; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vcc3v0_touch: LDO_REG2 { >> - regulator-name = "vcc3v0_touch"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <3000000>; >> - regulator-max-microvolt = <3000000>; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vcca_1v8: LDO_REG3 { >> - regulator-name = "vcca_1v8"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1800000>; >> - regulator-max-microvolt = <1800000>; >> - regulator-state-mem { >> - regulator-on-in-suspend; >> - regulator-suspend-microvolt = <1800000>; >> - }; >> - }; >> - >> - vcc_sdio: LDO_REG4 { >> - regulator-name = "vcc_sdio"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1800000>; >> - regulator-max-microvolt = <3000000>; >> - regulator-state-mem { >> - regulator-on-in-suspend; >> - regulator-suspend-microvolt = <3000000>; >> - }; >> - }; >> - >> - vcca3v0_codec: LDO_REG5 { >> - regulator-name = "vcca3v0_codec"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <3000000>; >> - regulator-max-microvolt = <3000000>; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vcc_1v5: LDO_REG6 { >> - regulator-name = "vcc_1v5"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1500000>; >> - regulator-max-microvolt = <1500000>; >> - regulator-state-mem { >> - regulator-on-in-suspend; >> - regulator-suspend-microvolt = <1500000>; >> - }; >> - }; >> - >> - vcca1v8_codec: LDO_REG7 { >> - regulator-name = "vcca1v8_codec"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <1800000>; >> - regulator-max-microvolt = <1800000>; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vcc_3v0: LDO_REG8 { >> - regulator-name = "vcc_3v0"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-min-microvolt = <3000000>; >> - regulator-max-microvolt = <3000000>; >> - regulator-state-mem { >> - regulator-on-in-suspend; >> - regulator-suspend-microvolt = <3000000>; >> - }; >> - }; >> - >> - vcc3v3_s3: vcc_lan: SWITCH_REG1 { >> - regulator-name = "vcc3v3_s3"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vcc3v3_s0: SWITCH_REG2 { >> - regulator-name = "vcc3v3_s0"; >> - regulator-always-on; >> - regulator-boot-on; >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - }; >> - }; >> - >> - vdd_cpu_b: regulator@40 { >> - compatible = "silergy,syr827"; >> - reg = <0x40>; >> - fcs,suspend-voltage-selector = <1>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&vsel1_gpio>; >> - regulator-name = "vdd_cpu_b"; >> - regulator-min-microvolt = <712500>; >> - regulator-max-microvolt = <1500000>; >> - regulator-ramp-delay = <1000>; >> - regulator-always-on; >> - regulator-boot-on; >> - vin-supply = <&vcc5v0_sys>; >> - >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> - >> - vdd_gpu: regulator@41 { >> - compatible = "silergy,syr828"; >> - reg = <0x41>; >> - fcs,suspend-voltage-selector = <1>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&vsel2_gpio>; >> - regulator-name = "vdd_gpu"; >> - regulator-min-microvolt = <712500>; >> - regulator-max-microvolt = <1500000>; >> - regulator-ramp-delay = <1000>; >> - regulator-always-on; >> - regulator-boot-on; >> - vin-supply = <&vcc5v0_sys>; >> - >> - regulator-state-mem { >> - regulator-off-in-suspend; >> - }; >> - }; >> }; >> >> &i2c1 { >> - i2c-scl-rising-time-ns = <300>; >> - i2c-scl-falling-time-ns = <15>; >> - status = "okay"; >> - >> es8316: codec@11 { >> compatible = "everest,es8316"; >> reg = <0x11>; >> @@ -491,291 +28,3 @@ es8316_p0_0: endpoint { >> }; >> }; >> }; >> - >> -&i2c3 { >> - i2c-scl-rising-time-ns = <450>; >> - i2c-scl-falling-time-ns = <15>; >> - status = "okay"; >> -}; >> - >> -&i2c4 { >> - i2c-scl-rising-time-ns = <600>; >> - i2c-scl-falling-time-ns = <20>; >> - status = "okay"; >> - >> - fusb0: typec-portc@22 { >> - compatible = "fcs,fusb302"; >> - reg = <0x22>; >> - interrupt-parent = <&gpio1>; >> - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&fusb0_int>; >> - vbus-supply = <&vcc5v0_typec>; >> - status = "okay"; >> - }; >> -}; >> - >> -&i2s0 { >> - rockchip,playback-channels = <8>; >> - rockchip,capture-channels = <8>; >> - status = "okay"; >> -}; >> - >> -&i2s1 { >> - rockchip,playback-channels = <2>; >> - rockchip,capture-channels = <2>; >> - status = "okay"; >> - >> - i2s1_p0: port { >> - i2s1_p0_0: endpoint { >> - dai-format = "i2s"; >> - mclk-fs = <256>; >> - remote-endpoint = <&es8316_p0_0>; >> - }; >> - }; >> -}; >> - >> -&i2s2 { >> - status = "okay"; >> -}; >> - >> -&io_domains { >> - status = "okay"; >> - >> - bt656-supply = <&vcc1v8_dvp>; >> - audio-supply = <&vcc_3v0>; >> - sdmmc-supply = <&vcc_sdio>; >> - gpio1830-supply = <&vcc_3v0>; >> -}; >> - >> -&pcie0 { >> - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; >> - num-lanes = <4>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&pcie_perst>; >> - vpcie12v-supply = <&vcc12v_dcin>; >> - vpcie3v3-supply = <&vcc3v3_pcie>; >> - status = "okay"; >> -}; >> - >> -&pcie_phy { >> - status = "okay"; >> -}; >> - >> -&pmu_io_domains { >> - pmu1830-supply = <&vcc_3v0>; >> - status = "okay"; >> -}; >> - >> -&pinctrl { >> - buttons { >> - pwrbtn: pwrbtn { >> - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; >> - }; >> - }; >> - >> - fusb302x { >> - fusb0_int: fusb0-int { >> - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; >> - }; >> - }; >> - >> - leds { >> - work_led_gpio: work_led-gpio { >> - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; >> - }; >> - >> - diy_led_gpio: diy_led-gpio { >> - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; >> - }; >> - }; >> - >> - pcie { >> - pcie_perst: pcie-perst { >> - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; >> - }; >> - >> - pcie_pwr_en: pcie-pwr-en { >> - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; >> - }; >> - }; >> - >> - pmic { >> - pmic_int_l: pmic-int-l { >> - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; >> - }; >> - >> - vsel1_gpio: vsel1-gpio { >> - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; >> - }; >> - >> - vsel2_gpio: vsel2-gpio { >> - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; >> - }; >> - }; >> - >> - sdio-pwrseq { >> - wifi_enable_h: wifi-enable-h { >> - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; >> - }; >> - }; >> - >> - usb-typec { >> - vcc5v0_typec_en: vcc5v0_typec_en { >> - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; >> - }; >> - }; >> - >> - usb2 { >> - vcc5v0_host_en: vcc5v0-host-en { >> - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; >> - }; >> - }; >> -}; >> - >> -&pwm0 { >> - status = "okay"; >> -}; >> - >> -&pwm1 { >> - status = "okay"; >> -}; >> - >> -&pwm2 { >> - status = "okay"; >> -}; >> - >> -&saradc { >> - vref-supply = <&vcca1v8_s3>; >> - status = "okay"; >> -}; >> - >> -&sdmmc { >> - bus-width = <4>; >> - cap-sd-highspeed; >> - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; >> - disable-wp; >> - max-frequency = <150000000>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; >> - status = "okay"; >> -}; >> - >> -&sdhci { >> - bus-width = <8>; >> - mmc-hs200-1_8v; >> - non-removable; >> - status = "okay"; >> -}; >> - >> -&spi1 { >> - status = "okay"; >> - >> - flash@0 { >> - compatible = "jedec,spi-nor"; >> - reg = <0>; >> - spi-max-frequency = <10000000>; >> - }; >> -}; >> - >> -&tcphy0 { >> - status = "okay"; >> -}; >> - >> -&tcphy1 { >> - status = "okay"; >> -}; >> - >> -&tsadc { >> - /* tshut mode 0:CRU 1:GPIO */ >> - rockchip,hw-tshut-mode = <1>; >> - /* tshut polarity 0:LOW 1:HIGH */ >> - rockchip,hw-tshut-polarity = <1>; >> - status = "okay"; >> -}; >> - >> -&u2phy0 { >> - status = "okay"; >> - >> - u2phy0_otg: otg-port { >> - status = "okay"; >> - }; >> - >> - u2phy0_host: host-port { >> - phy-supply = <&vcc5v0_host>; >> - status = "okay"; >> - }; >> -}; >> - >> -&u2phy1 { >> - status = "okay"; >> - >> - u2phy1_otg: otg-port { >> - status = "okay"; >> - }; >> - >> - u2phy1_host: host-port { >> - phy-supply = <&vcc5v0_host>; >> - status = "okay"; >> - }; >> -}; >> - >> -&uart0 { >> - pinctrl-names = "default"; >> - pinctrl-0 = <&uart0_xfer &uart0_cts>; >> - status = "okay"; >> -}; >> - >> -&uart2 { >> - status = "okay"; >> -}; >> - >> -&usb_host0_ehci { >> - status = "okay"; >> -}; >> - >> -&usb_host0_ohci { >> - status = "okay"; >> -}; >> - >> -&usb_host1_ehci { >> - status = "okay"; >> -}; >> - >> -&usb_host1_ohci { >> - status = "okay"; >> -}; >> - >> -&usbdrd3_0 { >> - status = "okay"; >> -}; >> - >> -&usbdrd_dwc3_0 { >> - status = "okay"; >> - dr_mode = "otg"; >> -}; >> - >> -&usbdrd3_1 { >> - status = "okay"; >> -}; >> - >> -&usbdrd_dwc3_1 { >> - status = "okay"; >> - dr_mode = "host"; >> -}; >> - >> -&vopb { >> - status = "okay"; >> -}; >> - >> -&vopb_mmu { >> - status = "okay"; >> -}; >> - >> -&vopl { >> - status = "okay"; >> -}; >> - >> -&vopl_mmu { >> - status = "okay"; >> -}; >> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi >> new file mode 100644 >> index 000000000000..183eda4ffb9c >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi >> @@ -0,0 +1,763 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. >> + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> >> + */ >> + >> +#include <dt-bindings/input/linux-event-codes.h> >> +#include <dt-bindings/pwm/pwm.h> >> +#include "rk3399.dtsi" >> +#include "rk3399-opp.dtsi" >> + >> +/ { >> + chosen { >> + stdout-path = "serial2:1500000n8"; >> + }; >> + >> + clkin_gmac: external-gmac-clock { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = "clkin_gmac"; >> + #clock-cells = <0>; >> + }; >> + >> + gpio-keys { >> + compatible = "gpio-keys"; >> + autorepeat; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pwrbtn>; >> + >> + power { >> + debounce-interval = <100>; >> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; >> + label = "GPIO Key Power"; >> + linux,code = <KEY_POWER>; >> + wakeup-source; >> + }; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; >> + >> + work-led { >> + label = "work"; >> + default-state = "on"; >> + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + diy-led { >> + label = "diy"; >> + default-state = "off"; >> + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; >> + }; >> + }; >> + >> + fan: pwm-fan { >> + compatible = "pwm-fan"; >> + #cooling-cells = <2>; >> + fan-supply = <&vcc12v_dcin>; >> + pwms = <&pwm1 0 50000 0>; >> + }; >> + >> + sdio_pwrseq: sdio-pwrseq { >> + compatible = "mmc-pwrseq-simple"; >> + clocks = <&rk808 1>; >> + clock-names = "ext_clock"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&wifi_enable_h>; >> + >> + /* >> + * On the module itself this is one of these (depending >> + * on the actual card populated): >> + * - SDIO_RESET_L_WL_REG_ON >> + * - PDN (power down when low) >> + */ >> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; >> + }; >> + >> + sound { >> + compatible = "audio-graph-card"; >> + label = "rockchip,rk3399"; >> + dais = <&i2s1_p0>; >> + }; >> + >> + vcc12v_dcin: vcc12v-dcin { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc12v_dcin"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <12000000>; >> + regulator-max-microvolt = <12000000>; >> + }; >> + >> + /* switched by pmic_sleep */ >> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc1v8_s3"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + vin-supply = <&vcc_1v8>; >> + }; >> + >> + vcc3v3_pcie: vcc3v3-pcie-regulator { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pcie_pwr_en>; >> + regulator-name = "vcc3v3_pcie"; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vcc3v3_sys: vcc3v3-sys { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc3v3_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + vin-supply = <&vcc5v0_sys>; >> + }; >> + >> + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ >> + vcc5v0_host: vcc5v0-host-regulator { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc5v0_host_en>; >> + regulator-name = "vcc5v0_host"; >> + regulator-always-on; >> + vin-supply = <&vcc5v0_usb>; >> + }; >> + >> + vcc5v0_typec: vcc5v0-typec-regulator { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc5v0_typec_en>; >> + regulator-name = "vcc5v0_typec"; >> + regulator-always-on; >> + vin-supply = <&vcc5v0_usb>; >> + }; >> + >> + vcc5v0_sys: vcc5v0-sys { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vcc5v0_usb: vcc5v0-usb { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_usb"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vdd_log: vdd-log { >> + compatible = "pwm-regulator"; >> + pwms = <&pwm2 0 25000 1>; >> + regulator-name = "vdd_log"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1700000>; >> + vin-supply = <&vcc5v0_sys>; >> + }; >> +}; >> + >> +&cpu_l0 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_l1 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_l2 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_l3 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_b0 { >> + cpu-supply = <&vdd_cpu_b>; >> +}; >> + >> +&cpu_b1 { >> + cpu-supply = <&vdd_cpu_b>; >> +}; >> + >> +&emmc_phy { >> + status = "okay"; >> +}; >> + >> +&gmac { >> + assigned-clocks = <&cru SCLK_RMII_SRC>; >> + assigned-clock-parents = <&clkin_gmac>; >> + clock_in_out = "input"; >> + phy-supply = <&vcc_lan>; >> + phy-mode = "rgmii"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rgmii_pins>; >> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; >> + snps,reset-active-low; >> + snps,reset-delays-us = <0 10000 50000>; >> + tx_delay = <0x28>; >> + rx_delay = <0x11>; >> + status = "okay"; >> +}; >> + >> +&hdmi { >> + ddc-i2c-bus = <&i2c3>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hdmi_cec>; >> + status = "okay"; >> +}; >> + >> +&hdmi_sound { >> + status = "okay"; >> +}; >> + >> +&gpu { >> + mali-supply = <&vdd_gpu>; >> + status = "okay"; >> +}; >> + >> +&i2c0 { >> + clock-frequency = <400000>; >> + i2c-scl-rising-time-ns = <168>; >> + i2c-scl-falling-time-ns = <4>; >> + status = "okay"; >> + >> + rk808: pmic@1b { >> + compatible = "rockchip,rk808"; >> + reg = <0x1b>; >> + interrupt-parent = <&gpio3>; >> + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; >> + #clock-cells = <1>; >> + clock-output-names = "xin32k", "rk808-clkout2"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pmic_int_l>; >> + rockchip,system-power-controller; >> + wakeup-source; >> + >> + vcc1-supply = <&vcc5v0_sys>; >> + vcc2-supply = <&vcc5v0_sys>; >> + vcc3-supply = <&vcc5v0_sys>; >> + vcc4-supply = <&vcc5v0_sys>; >> + vcc6-supply = <&vcc5v0_sys>; >> + vcc7-supply = <&vcc5v0_sys>; >> + vcc8-supply = <&vcc3v3_sys>; >> + vcc9-supply = <&vcc5v0_sys>; >> + vcc10-supply = <&vcc5v0_sys>; >> + vcc11-supply = <&vcc5v0_sys>; >> + vcc12-supply = <&vcc3v3_sys>; >> + vddio-supply = <&vcca_1v8>; >> + >> + regulators { >> + vdd_center: DCDC_REG1 { >> + regulator-name = "vdd_center"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-ramp-delay = <6001>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_cpu_l: DCDC_REG2 { >> + regulator-name = "vdd_cpu_l"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-ramp-delay = <6001>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_ddr: DCDC_REG3 { >> + regulator-name = "vcc_ddr"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + }; >> + }; >> + >> + vcc_1v8: DCDC_REG4 { >> + regulator-name = "vcc_1v8"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vcc1v8_dvp: LDO_REG1 { >> + regulator-name = "vcc1v8_dvp"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc3v0_touch: LDO_REG2 { >> + regulator-name = "vcc3v0_touch"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcca_1v8: LDO_REG3 { >> + regulator-name = "vcca_1v8"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vcc_sdio: LDO_REG4 { >> + regulator-name = "vcc_sdio"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <3000000>; >> + }; >> + }; >> + >> + vcca3v0_codec: LDO_REG5 { >> + regulator-name = "vcca3v0_codec"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_1v5: LDO_REG6 { >> + regulator-name = "vcc_1v5"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1500000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1500000>; >> + }; >> + }; >> + >> + vcca1v8_codec: LDO_REG7 { >> + regulator-name = "vcca1v8_codec"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_3v0: LDO_REG8 { >> + regulator-name = "vcc_3v0"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <3000000>; >> + }; >> + }; >> + >> + vcc3v3_s3: vcc_lan: SWITCH_REG1 { >> + regulator-name = "vcc3v3_s3"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc3v3_s0: SWITCH_REG2 { >> + regulator-name = "vcc3v3_s0"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + }; >> + }; >> + >> + vdd_cpu_b: regulator@40 { >> + compatible = "silergy,syr827"; >> + reg = <0x40>; >> + fcs,suspend-voltage-selector = <1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vsel1_gpio>; >> + regulator-name = "vdd_cpu_b"; >> + regulator-min-microvolt = <712500>; >> + regulator-max-microvolt = <1500000>; >> + regulator-ramp-delay = <1000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc5v0_sys>; >> + >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_gpu: regulator@41 { >> + compatible = "silergy,syr828"; >> + reg = <0x41>; >> + fcs,suspend-voltage-selector = <1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vsel2_gpio>; >> + regulator-name = "vdd_gpu"; >> + regulator-min-microvolt = <712500>; >> + regulator-max-microvolt = <1500000>; >> + regulator-ramp-delay = <1000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc5v0_sys>; >> + >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> +}; >> + >> +&i2c1 { >> + i2c-scl-rising-time-ns = <300>; >> + i2c-scl-falling-time-ns = <15>; >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + i2c-scl-rising-time-ns = <450>; >> + i2c-scl-falling-time-ns = <15>; >> + status = "okay"; >> +}; >> + >> +&i2c4 { >> + i2c-scl-rising-time-ns = <600>; >> + i2c-scl-falling-time-ns = <20>; >> + status = "okay"; >> + >> + fusb0: typec-portc@22 { >> + compatible = "fcs,fusb302"; >> + reg = <0x22>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&fusb0_int>; >> + vbus-supply = <&vcc5v0_typec>; >> + status = "okay"; >> + }; >> +}; >> + >> +&i2s0 { >> + rockchip,playback-channels = <8>; >> + rockchip,capture-channels = <8>; >> + status = "okay"; >> +}; >> + >> +&i2s1 { >> + rockchip,playback-channels = <2>; >> + rockchip,capture-channels = <2>; >> + status = "okay"; >> + >> + i2s1_p0: port { >> + i2s1_p0_0: endpoint { >> + dai-format = "i2s"; >> + mclk-fs = <256>; >> + remote-endpoint = <&es8316_p0_0>; >> + }; >> + }; >> +}; >> + >> +&i2s2 { >> + status = "okay"; >> +}; >> + >> +&io_domains { >> + status = "okay"; >> + >> + bt656-supply = <&vcc1v8_dvp>; >> + audio-supply = <&vcc_3v0>; >> + sdmmc-supply = <&vcc_sdio>; >> + gpio1830-supply = <&vcc_3v0>; >> +}; >> + >> +&pcie0 { >> + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; >> + num-lanes = <4>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pcie_perst>; >> + vpcie12v-supply = <&vcc12v_dcin>; >> + vpcie3v3-supply = <&vcc3v3_pcie>; >> + status = "okay"; >> +}; >> + >> +&pcie_phy { >> + status = "okay"; >> +}; >> + >> +&pmu_io_domains { >> + pmu1830-supply = <&vcc_3v0>; >> + status = "okay"; >> +}; >> + >> +&pinctrl { >> + buttons { >> + pwrbtn: pwrbtn { >> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + fusb302x { >> + fusb0_int: fusb0-int { >> + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + leds { >> + work_led_gpio: work_led-gpio { >> + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + diy_led_gpio: diy_led-gpio { >> + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + pcie { >> + pcie_perst: pcie-perst { >> + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + pcie_pwr_en: pcie-pwr-en { >> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + pmic { >> + pmic_int_l: pmic-int-l { >> + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + >> + vsel1_gpio: vsel1-gpio { >> + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; >> + }; >> + >> + vsel2_gpio: vsel2-gpio { >> + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; >> + }; >> + }; >> + >> + sdio-pwrseq { >> + wifi_enable_h: wifi-enable-h { >> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + usb-typec { >> + vcc5v0_typec_en: vcc5v0_typec_en { >> + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + usb2 { >> + vcc5v0_host_en: vcc5v0-host-en { >> + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> +}; >> + >> +&pwm0 { >> + status = "okay"; >> +}; >> + >> +&pwm1 { >> + status = "okay"; >> +}; >> + >> +&pwm2 { >> + status = "okay"; >> +}; >> + >> +&saradc { >> + vref-supply = <&vcca1v8_s3>; >> + status = "okay"; >> +}; >> + >> +&sdmmc { >> + bus-width = <4>; >> + cap-sd-highspeed; >> + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; >> + disable-wp; >> + max-frequency = <150000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; >> + status = "okay"; >> +}; >> + >> +&sdhci { >> + bus-width = <8>; >> + mmc-hs200-1_8v; >> + non-removable; >> + status = "okay"; >> +}; >> + >> +&spi1 { >> + status = "okay"; >> + >> + flash@0 { >> + compatible = "jedec,spi-nor"; >> + reg = <0>; >> + spi-max-frequency = <10000000>; >> + }; >> +}; >> + >> +&tcphy0 { >> + status = "okay"; >> +}; >> + >> +&tcphy1 { >> + status = "okay"; >> +}; >> + >> +&tsadc { >> + /* tshut mode 0:CRU 1:GPIO */ >> + rockchip,hw-tshut-mode = <1>; >> + /* tshut polarity 0:LOW 1:HIGH */ >> + rockchip,hw-tshut-polarity = <1>; >> + status = "okay"; >> +}; >> + >> +&u2phy0 { >> + status = "okay"; >> + >> + u2phy0_otg: otg-port { >> + status = "okay"; >> + }; >> + >> + u2phy0_host: host-port { >> + phy-supply = <&vcc5v0_host>; >> + status = "okay"; >> + }; >> +}; >> + >> +&u2phy1 { >> + status = "okay"; >> + >> + u2phy1_otg: otg-port { >> + status = "okay"; >> + }; >> + >> + u2phy1_host: host-port { >> + phy-supply = <&vcc5v0_host>; >> + status = "okay"; >> + }; >> +}; >> + >> +&uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_xfer &uart0_cts>; >> + status = "okay"; >> +}; >> + >> +&uart2 { >> + status = "okay"; >> +}; >> + >> +&usb_host0_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_host0_ohci { >> + status = "okay"; >> +}; >> + >> +&usb_host1_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_host1_ohci { >> + status = "okay"; >> +}; >> + >> +&usbdrd3_0 { >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_0 { >> + status = "okay"; >> + dr_mode = "otg"; >> +}; >> + >> +&usbdrd3_1 { >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_1 { >> + status = "okay"; >> + dr_mode = "host"; >> +}; >> + >> +&vopb { >> + status = "okay"; >> +}; >> + >> +&vopb_mmu { >> + status = "okay"; >> +}; >> + >> +&vopl { >> + status = "okay"; >> +}; >> + >> +&vopl_mmu { >> + status = "okay"; >> +}; >> -- >> 2.24.0 >> >
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 48fb631d5451..ee67175f3e78 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts new file mode 100644 index 000000000000..5457266036b7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> + */ + +/dts-v1/; +#include "rk3399-rockpro64.dtsi" + +/ { + model = "Pine64 RockPro64 v2.0"; + compatible = "pine64,rockpro64", "rockchip,rk3399"; +}; + +&i2c1 { + es8316: codec@10 { + compatible = "everest,es8316"; + reg = <0x10>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 7f4b2eba31d4..9450207bedad 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -2,481 +2,18 @@ /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> */ /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-rockpro64.dtsi" / { - model = "Pine64 RockPro64"; + model = "Pine64 RockPro64 v2.1"; compatible = "pine64,rockpro64", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; - - work-led { - label = "work"; - default-state = "on"; - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - diy-led { - label = "diy"; - default-state = "off"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - fan-supply = <&vcc12v_dcin>; - pwms = <&pwm1 0 50000 0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - sound { - compatible = "audio-graph-card"; - label = "rockchip,rk3399"; - dais = <&i2s1_p0>; - }; - - vcc12v_dcin: vcc12v-dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1700000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio3>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; }; &i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - es8316: codec@11 { compatible = "everest,es8316"; reg = <0x11>; @@ -491,291 +28,3 @@ es8316_p0_0: endpoint { }; }; }; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - status = "okay"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; - - i2s1_p0: port { - i2s1_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&es8316_p0_0>; - }; - }; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_perst>; - vpcie12v-supply = <&vcc12v_dcin>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - work_led_gpio: work_led-gpio { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_gpio: diy_led-gpio { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_perst: pcie-perst { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi new file mode 100644 index 000000000000..183eda4ffb9c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -0,0 +1,763 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm1 0 50000 0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1700000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +};
This patch splits rk3399-rockpro64 dts file to 2 files for v2 and v2.1 boards. Both v2 and v2.1 boards can use almost same settings but we find a difference in I2C address of audio CODEC ES8136. Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> --- Changes in v2: - Use rk3399-rockpro64.dts for for v2.1 instead of creating rk3399-rockpro64-v2.1.dts --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-rockpro64-v2.dts | 30 + .../boot/dts/rockchip/rk3399-rockpro64.dts | 757 +---------------- .../boot/dts/rockchip/rk3399-rockpro64.dtsi | 763 ++++++++++++++++++ 4 files changed, 797 insertions(+), 754 deletions(-) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi