deleted file mode 100644
@@ -1,61 +0,0 @@
-STM32 Real Time Clock
-
-Required properties:
-- compatible: can be one of the following:
- - "st,stm32-rtc" for devices compatible with stm32(f4/f7).
- - "st,stm32h7-rtc" for devices compatible with stm32h7.
- - "st,stm32mp1-rtc" for devices compatible with stm32mp1.
-- reg: address range of rtc register set.
-- clocks: can use up to two clocks, depending on part used:
- - "rtc_ck": RTC clock source.
- - "pclk": RTC APB interface clock.
- It is not present on stm32(f4/f7).
- It is required on stm32(h7/mp1).
-- clock-names: must be "rtc_ck" and "pclk".
- It is required on stm32(h7/mp1).
-- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required
- for rtc alarm wakeup interrupt.
-- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to
- access control register at offset, and change the dbp (Disable Backup
- Protection) bit represented by the mask, mandatory to disable/enable backup
- domain (RTC registers) write protection.
- It is required on stm32(f4/f7/h7).
-
-Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7):
-- assigned-clocks: reference to the rtc_ck clock entry.
-- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
-
-Example:
-
- rtc: rtc@40002800 {
- compatible = "st,stm32-rtc";
- reg = <0x40002800 0x400>;
- clocks = <&rcc 1 CLK_RTC>;
- assigned-clocks = <&rcc 1 CLK_RTC>;
- assigned-clock-parents = <&rcc 1 CLK_LSE>;
- interrupt-parent = <&exti>;
- interrupts = <17 1>;
- st,syscfg = <&pwrcfg 0x00 0x100>;
- };
-
- rtc: rtc@58004000 {
- compatible = "st,stm32h7-rtc";
- reg = <0x58004000 0x400>;
- clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
- clock-names = "pclk", "rtc_ck";
- assigned-clocks = <&rcc RTC_CK>;
- assigned-clock-parents = <&rcc LSE_CK>;
- interrupt-parent = <&exti>;
- interrupts = <17 1>;
- interrupt-names = "alarm";
- st,syscfg = <&pwrcfg 0x00 0x100>;
- };
-
- rtc: rtc@5c004000 {
- compatible = "st,stm32mp1-rtc";
- reg = <0x5c004000 0x400>;
- clocks = <&rcc RTCAPB>, <&rcc RTC>;
- clock-names = "pclk", "rtc_ck";
- interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>,
- <&exti 19 1>;
- };
new file mode 100644
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,stm32-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Real Time Clock Bindings
+
+maintainers:
+ - Gabriel Fernandez <gabriel.fernandez@st.com>
+
+properties:
+ compatible:
+ enum:
+ - st,stm32-rtc
+ - st,stm32h7-rtc
+ - st,stm32mp1-rtc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: rtc_ck
+
+ interrupts:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-rtc
+ - st,stm32h7-rtc
+ then:
+ properties:
+ st,syscfg:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ - items:
+ minItems: 3
+ maxItems: 3
+ description: |
+ Phandle/offset/mask triplet. The phandle to pwrcfg used to
+ access control register at offset, and change the dbp (Disable Backup
+ Protection) bit represented by the mask, mandatory to disable/enable backup
+ domain (RTC registers) write protection.
+
+ assigned-clocks:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description: |
+ override default rtc_ck parent clock reference to the rtc_ck clock entry
+ maxItems: 1
+
+ assigned-clock-parents:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description: |
+ override default rtc_ck parent clock phandle of the new parent clock of rtc_ck
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32-rtc
+
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 1
+
+ clock-names: false
+
+ required:
+ - st,syscfg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32h7-rtc
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - clock-names
+ - st,syscfg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp1-rtc
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+
+ assigned-clocks: false
+ assigned-clock-parents: false
+
+ required:
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/mfd/stm32f4-rcc.h>
+ #include <dt-bindings/clock/stm32fx-clock.h>
+ rtc@40002800 {
+ compatible = "st,stm32-rtc";
+ reg = <0x40002800 0x400>;
+ clocks = <&rcc 1 CLK_RTC>;
+ assigned-clocks = <&rcc 1 CLK_RTC>;
+ assigned-clock-parents = <&rcc 1 CLK_LSE>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 1>;
+ st,syscfg = <&pwrcfg 0x00 0x100>;
+ };
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+...
Convert the STM32 RTC binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- .../devicetree/bindings/rtc/st,stm32-rtc.txt | 61 --------- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 152 +++++++++++++++++++++ 2 files changed, 152 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml