diff mbox series

[v3,03/13] iommu/arm-smmu-v3: Support platform SSID

Message ID 20191209180514.272727-4-jean-philippe@linaro.org (mailing list archive)
State New, archived
Headers show
Series iommu: Add PASID support to Arm SMMUv3 | expand

Commit Message

Jean-Philippe Brucker Dec. 9, 2019, 6:05 p.m. UTC
For platform devices that support SubstreamID (SSID), firmware provides
the number of supported SSID bits. Restrict it to what the SMMU supports
and cache it into master->ssid_bits, which will also be used for PCI
PASID.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 drivers/iommu/arm-smmu-v3.c | 13 +++++++++++++
 drivers/iommu/of_iommu.c    |  6 +++++-
 include/linux/iommu.h       |  2 ++
 3 files changed, 20 insertions(+), 1 deletion(-)

Comments

Eric Auger Dec. 17, 2019, 11:05 a.m. UTC | #1
Hi Jean,

On 12/9/19 7:05 PM, Jean-Philippe Brucker wrote:
> For platform devices that support SubstreamID (SSID), firmware provides
> the number of supported SSID bits. Restrict it to what the SMMU supports
> and cache it into master->ssid_bits, which will also be used for PCI
> PASID.
> 
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
> ---
>  drivers/iommu/arm-smmu-v3.c | 13 +++++++++++++
>  drivers/iommu/of_iommu.c    |  6 +++++-
>  include/linux/iommu.h       |  2 ++
>  3 files changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index d4e8b7f8d9f4..837b4283b4dc 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -292,6 +292,12 @@
>  
>  #define CTXDESC_CD_1_TTB0_MASK		GENMASK_ULL(51, 4)
>  
> +/*
> + * When the SMMU only supports linear context descriptor tables, pick a
> + * reasonable size limit (64kB).
> + */
> +#define CTXDESC_LINEAR_CDMAX		ilog2(SZ_64K / (CTXDESC_CD_DWORDS << 3))
> +
>  /* Convert between AArch64 (CPU) TCR format and SMMU CD format */
>  #define ARM_SMMU_TCR2CD(tcr, fld)	FIELD_PREP(CTXDESC_CD_0_TCR_##fld, \
>  					FIELD_GET(ARM64_TCR_##fld, tcr))
> @@ -638,6 +644,7 @@ struct arm_smmu_master {
>  	u32				*sids;
>  	unsigned int			num_sids;
>  	bool				ats_enabled;
> +	unsigned int			ssid_bits;
>  };
>  
>  /* SMMU private data for an IOMMU domain */
> @@ -2571,6 +2578,12 @@ static int arm_smmu_add_device(struct device *dev)
>  		}
>  	}
>  
> +	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
> +
> +	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
> +		master->ssid_bits = min_t(u8, master->ssid_bits,
> +					  CTXDESC_LINEAR_CDMAX);
> +
>  	group = iommu_group_get_for_dev(dev);
>  	if (!IS_ERR(group)) {
>  		iommu_group_put(group);
> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
> index 026ad2b29dcd..b3ccb2f7f1c7 100644
> --- a/drivers/iommu/of_iommu.c
> +++ b/drivers/iommu/of_iommu.c
> @@ -196,8 +196,12 @@ const struct iommu_ops *of_iommu_configure(struct device *dev,
>  			if (err)
>  				break;
>  		}
> -	}
>  
> +		fwspec = dev_iommu_fwspec_get(dev);
> +		if (!err && fwspec)
> +			of_property_read_u32(master_np, "pasid-num-bits",
> +					     &fwspec->num_pasid_bits);
> +	}
This patch dedicates to platform devices however I fail to understand,
at that stage, how/when do you retrieve/store the same max capability
for PCI devices?
>  
>  	/*
>  	 * Two success conditions can be represented by non-negative err here:
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 3a113c5d7394..bd46775c3329 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -581,6 +581,7 @@ struct iommu_group *fsl_mc_device_group(struct device *dev);
>   * @ops: ops for this device's IOMMU
>   * @iommu_fwnode: firmware handle for this device's IOMMU
>   * @iommu_priv: IOMMU driver private data for this device
> + * @num_pasid_bits: number of PASID bits supported by this device
>   * @num_ids: number of associated device IDs
>   * @ids: IDs which this device may present to the IOMMU
>   */
> @@ -589,6 +590,7 @@ struct iommu_fwspec {
>  	struct fwnode_handle	*iommu_fwnode;
>  	void			*iommu_priv;
>  	u32			flags;
> +	u32			num_pasid_bits;
>  	unsigned int		num_ids;
>  	u32			ids[1];
>  };
> 
Besides,

Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric
Jean-Philippe Brucker Dec. 17, 2019, 3:21 p.m. UTC | #2
Hi Eric,

On Tue, Dec 17, 2019 at 12:05:18PM +0100, Auger Eric wrote:
> > +		fwspec = dev_iommu_fwspec_get(dev);
> > +		if (!err && fwspec)
> > +			of_property_read_u32(master_np, "pasid-num-bits",
> > +					     &fwspec->num_pasid_bits);
> > +	}
> This patch dedicates to platform devices however I fail to understand,
> at that stage, how/when do you retrieve/store the same max capability
> for PCI devices?

For PCI devices, the max capability is only described by the PCIe PASID
capability, not by firmware. Patch 13 deals with PCI by setting
masted->ssid_bits from the PASID capability directly, ignoring
fwspec->num_pasid_bits.

> Besides,
> 
> Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks!
Jean
Eric Auger Dec. 17, 2019, 4:46 p.m. UTC | #3
Hi Jean,

On 12/17/19 4:21 PM, Jean-Philippe Brucker wrote:
> Hi Eric,
> 
> On Tue, Dec 17, 2019 at 12:05:18PM +0100, Auger Eric wrote:
>>> +		fwspec = dev_iommu_fwspec_get(dev);
>>> +		if (!err && fwspec)
>>> +			of_property_read_u32(master_np, "pasid-num-bits",
>>> +					     &fwspec->num_pasid_bits);
>>> +	}
>> This patch dedicates to platform devices however I fail to understand,
>> at that stage, how/when do you retrieve/store the same max capability
>> for PCI devices?
> 
> For PCI devices, the max capability is only described by the PCIe PASID
> capability, not by firmware. Patch 13 deals with PCI by setting
> masted->ssid_bits from the PASID capability directly, ignoring
> fwspec->num_pasid_bits.

Get it now. thank you for the explanation.

Eric
> 
>> Besides,
>>
>> Reviewed-by: Eric Auger <eric.auger@redhat.com>
> 
> Thanks!
> Jean
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Eric Auger Dec. 18, 2019, 10:17 a.m. UTC | #4
Hi Jean,

On 12/9/19 7:05 PM, Jean-Philippe Brucker wrote:
> For platform devices that support SubstreamID (SSID), firmware provides
> the number of supported SSID bits. Restrict it to what the SMMU supports
> and cache it into master->ssid_bits, which will also be used for PCI
> PASID.
> 
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
the title of the patch does not really explain what it actually does. At
this stage we are far from supporting SSIDs ;-) Same for 04?

Thanks

Eric
> ---
>  drivers/iommu/arm-smmu-v3.c | 13 +++++++++++++
>  drivers/iommu/of_iommu.c    |  6 +++++-
>  include/linux/iommu.h       |  2 ++
>  3 files changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index d4e8b7f8d9f4..837b4283b4dc 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -292,6 +292,12 @@
>  
>  #define CTXDESC_CD_1_TTB0_MASK		GENMASK_ULL(51, 4)
>  
> +/*
> + * When the SMMU only supports linear context descriptor tables, pick a
> + * reasonable size limit (64kB).
> + */
> +#define CTXDESC_LINEAR_CDMAX		ilog2(SZ_64K / (CTXDESC_CD_DWORDS << 3))
> +
>  /* Convert between AArch64 (CPU) TCR format and SMMU CD format */
>  #define ARM_SMMU_TCR2CD(tcr, fld)	FIELD_PREP(CTXDESC_CD_0_TCR_##fld, \
>  					FIELD_GET(ARM64_TCR_##fld, tcr))
> @@ -638,6 +644,7 @@ struct arm_smmu_master {
>  	u32				*sids;
>  	unsigned int			num_sids;
>  	bool				ats_enabled;
> +	unsigned int			ssid_bits;
>  };
>  
>  /* SMMU private data for an IOMMU domain */
> @@ -2571,6 +2578,12 @@ static int arm_smmu_add_device(struct device *dev)
>  		}
>  	}
>  
> +	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
> +
> +	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
> +		master->ssid_bits = min_t(u8, master->ssid_bits,
> +					  CTXDESC_LINEAR_CDMAX);
> +
>  	group = iommu_group_get_for_dev(dev);
>  	if (!IS_ERR(group)) {
>  		iommu_group_put(group);
> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
> index 026ad2b29dcd..b3ccb2f7f1c7 100644
> --- a/drivers/iommu/of_iommu.c
> +++ b/drivers/iommu/of_iommu.c
> @@ -196,8 +196,12 @@ const struct iommu_ops *of_iommu_configure(struct device *dev,
>  			if (err)
>  				break;
>  		}
> -	}
>  
> +		fwspec = dev_iommu_fwspec_get(dev);
> +		if (!err && fwspec)
> +			of_property_read_u32(master_np, "pasid-num-bits",
> +					     &fwspec->num_pasid_bits);
> +	}
>  
>  	/*
>  	 * Two success conditions can be represented by non-negative err here:
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 3a113c5d7394..bd46775c3329 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -581,6 +581,7 @@ struct iommu_group *fsl_mc_device_group(struct device *dev);
>   * @ops: ops for this device's IOMMU
>   * @iommu_fwnode: firmware handle for this device's IOMMU
>   * @iommu_priv: IOMMU driver private data for this device
> + * @num_pasid_bits: number of PASID bits supported by this device
>   * @num_ids: number of associated device IDs
>   * @ids: IDs which this device may present to the IOMMU
>   */
> @@ -589,6 +590,7 @@ struct iommu_fwspec {
>  	struct fwnode_handle	*iommu_fwnode;
>  	void			*iommu_priv;
>  	u32			flags;
> +	u32			num_pasid_bits;
>  	unsigned int		num_ids;
>  	u32			ids[1];
>  };
>
Jean-Philippe Brucker Dec. 18, 2019, 4:06 p.m. UTC | #5
On Wed, Dec 18, 2019 at 11:17:40AM +0100, Auger Eric wrote:
> Hi Jean,
> 
> On 12/9/19 7:05 PM, Jean-Philippe Brucker wrote:
> > For platform devices that support SubstreamID (SSID), firmware provides
> > the number of supported SSID bits. Restrict it to what the SMMU supports
> > and cache it into master->ssid_bits, which will also be used for PCI
> > PASID.
> > 
> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
> the title of the patch does not really explain what it actually does. At
> this stage we are far from supporting SSIDs ;-) Same for 04?

Alright I'll make this "Parse PASID devicetree property of platform
devices" and "Parse SSID property of named component node"

Thanks,
Jean
diff mbox series

Patch

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index d4e8b7f8d9f4..837b4283b4dc 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -292,6 +292,12 @@ 
 
 #define CTXDESC_CD_1_TTB0_MASK		GENMASK_ULL(51, 4)
 
+/*
+ * When the SMMU only supports linear context descriptor tables, pick a
+ * reasonable size limit (64kB).
+ */
+#define CTXDESC_LINEAR_CDMAX		ilog2(SZ_64K / (CTXDESC_CD_DWORDS << 3))
+
 /* Convert between AArch64 (CPU) TCR format and SMMU CD format */
 #define ARM_SMMU_TCR2CD(tcr, fld)	FIELD_PREP(CTXDESC_CD_0_TCR_##fld, \
 					FIELD_GET(ARM64_TCR_##fld, tcr))
@@ -638,6 +644,7 @@  struct arm_smmu_master {
 	u32				*sids;
 	unsigned int			num_sids;
 	bool				ats_enabled;
+	unsigned int			ssid_bits;
 };
 
 /* SMMU private data for an IOMMU domain */
@@ -2571,6 +2578,12 @@  static int arm_smmu_add_device(struct device *dev)
 		}
 	}
 
+	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
+
+	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
+		master->ssid_bits = min_t(u8, master->ssid_bits,
+					  CTXDESC_LINEAR_CDMAX);
+
 	group = iommu_group_get_for_dev(dev);
 	if (!IS_ERR(group)) {
 		iommu_group_put(group);
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index 026ad2b29dcd..b3ccb2f7f1c7 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -196,8 +196,12 @@  const struct iommu_ops *of_iommu_configure(struct device *dev,
 			if (err)
 				break;
 		}
-	}
 
+		fwspec = dev_iommu_fwspec_get(dev);
+		if (!err && fwspec)
+			of_property_read_u32(master_np, "pasid-num-bits",
+					     &fwspec->num_pasid_bits);
+	}
 
 	/*
 	 * Two success conditions can be represented by non-negative err here:
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 3a113c5d7394..bd46775c3329 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -581,6 +581,7 @@  struct iommu_group *fsl_mc_device_group(struct device *dev);
  * @ops: ops for this device's IOMMU
  * @iommu_fwnode: firmware handle for this device's IOMMU
  * @iommu_priv: IOMMU driver private data for this device
+ * @num_pasid_bits: number of PASID bits supported by this device
  * @num_ids: number of associated device IDs
  * @ids: IDs which this device may present to the IOMMU
  */
@@ -589,6 +590,7 @@  struct iommu_fwspec {
 	struct fwnode_handle	*iommu_fwnode;
 	void			*iommu_priv;
 	u32			flags;
+	u32			num_pasid_bits;
 	unsigned int		num_ids;
 	u32			ids[1];
 };