| Message ID | 20191211080749.30751-1-peng.ma@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/2] dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platform | expand |
On 2019/11/12 16:10 Peng Ma <peng.ma@nxp.com> wrote: > Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with > below registers(CHCFG0 - CHCFG15) of eDMA as follows: > *-----------------------------------------------------------* > | Offset | OTHERS | LS1028A | > |--------------|--------------------|-----------------------| > | 0x0 | CHCFG0 | CHCFG3 | > |--------------|--------------------|-----------------------| > | 0x1 | CHCFG1 | CHCFG2 | > |--------------|--------------------|-----------------------| > | 0x2 | CHCFG2 | CHCFG1 | > |--------------|--------------------|-----------------------| > | 0x3 | CHCFG3 | CHCFG0 | > |--------------|--------------------|-----------------------| > | ... | ...... | ...... | > |--------------|--------------------|-----------------------| > | 0xC | CHCFG12 | CHCFG15 | > |--------------|--------------------|-----------------------| > | 0xD | CHCFG13 | CHCFG14 | > |--------------|--------------------|-----------------------| > | 0xE | CHCFG14 | CHCFG13 | > |--------------|--------------------|-----------------------| > | 0xF | CHCFG15 | CHCFG12 | > *-----------------------------------------------------------* > > This patch is to improve edma driver to fit LS1028A platform. > > Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com>
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c index b1a7ca91701a..5697c3622699 100644 --- a/drivers/dma/fsl-edma-common.c +++ b/drivers/dma/fsl-edma-common.c @@ -109,10 +109,15 @@ void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan, u32 ch = fsl_chan->vchan.chan.chan_id; void __iomem *muxaddr; unsigned int chans_per_mux, ch_off; + int endian_diff[4] = {3, 1, -1, -3}; u32 dmamux_nr = fsl_chan->edma->drvdata->dmamuxs; chans_per_mux = fsl_chan->edma->n_chans / dmamux_nr; ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux; + + if (fsl_chan->edma->drvdata->mux_swap) + ch_off += endian_diff[ch_off % 4]; + muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux]; slot = EDMAMUX_CHCFG_SOURCE(slot); diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h index 5eaa2902ed39..67e422590c9a 100644 --- a/drivers/dma/fsl-edma-common.h +++ b/drivers/dma/fsl-edma-common.h @@ -147,6 +147,7 @@ struct fsl_edma_drvdata { enum edma_version version; u32 dmamuxs; bool has_dmaclk; + bool mux_swap; int (*setup_irq)(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma); }; diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c index b626c06ac2e0..eff7ebd8cf35 100644 --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -233,6 +233,13 @@ static struct fsl_edma_drvdata vf610_data = { .setup_irq = fsl_edma_irq_init, }; +static struct fsl_edma_drvdata ls1028a_data = { + .version = v1, + .dmamuxs = DMAMUX_NR, + .mux_swap = true, + .setup_irq = fsl_edma_irq_init, +}; + static struct fsl_edma_drvdata imx7ulp_data = { .version = v3, .dmamuxs = 1, @@ -242,6 +249,7 @@ static struct fsl_edma_drvdata imx7ulp_data = { static const struct of_device_id fsl_edma_dt_ids[] = { { .compatible = "fsl,vf610-edma", .data = &vf610_data}, + { .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data}, { .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data}, { /* sentinel */ } };
Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with below registers(CHCFG0 - CHCFG15) of eDMA as follows: *-----------------------------------------------------------* | Offset | OTHERS | LS1028A | |--------------|--------------------|-----------------------| | 0x0 | CHCFG0 | CHCFG3 | |--------------|--------------------|-----------------------| | 0x1 | CHCFG1 | CHCFG2 | |--------------|--------------------|-----------------------| | 0x2 | CHCFG2 | CHCFG1 | |--------------|--------------------|-----------------------| | 0x3 | CHCFG3 | CHCFG0 | |--------------|--------------------|-----------------------| | ... | ...... | ...... | |--------------|--------------------|-----------------------| | 0xC | CHCFG12 | CHCFG15 | |--------------|--------------------|-----------------------| | 0xD | CHCFG13 | CHCFG14 | |--------------|--------------------|-----------------------| | 0xE | CHCFG14 | CHCFG13 | |--------------|--------------------|-----------------------| | 0xF | CHCFG15 | CHCFG12 | *-----------------------------------------------------------* This patch is to improve edma driver to fit LS1028A platform. Signed-off-by: Peng Ma <peng.ma@nxp.com> --- Changed for v4: - Add 'mux_swap' into 'struct fsl_edma_drvdata' - Remove soc match function drivers/dma/fsl-edma-common.c | 5 +++++ drivers/dma/fsl-edma-common.h | 1 + drivers/dma/fsl-edma.c | 8 ++++++++ 3 files changed, 14 insertions(+)