diff mbox series

[9/9] ARM: defconfig: u8500: Enable new drivers for samsung-golden

Message ID 20191219202052.19039-10-stephan@gerhold.net (mailing list archive)
State New, archived
Headers show
Series Add device tree for Samsung Galaxy S III mini (GT-I8190) | expand

Commit Message

Stephan Gerhold Dec. 19, 2019, 8:20 p.m. UTC
The new device tree for samsung-golden depends on some additional
drivers that are not selected in the u8500 defconfig yet:

  - Bluetooth: hci_bcm
  - WiFi: brcmfmac
  - Touchscreen: atmel_mxt_ts
  - Vibrator: gpio-vibra
  - Sensors: inv_mpu6050 (IMU)

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm/configs/u8500_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 822cddfbf1af..aff87c5ecc43 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -30,6 +30,9 @@  CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_NETFILTER=y
 CONFIG_PHONET=y
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=y
 CONFIG_CFG80211_DEBUGFS=y
 CONFIG_MAC80211=y
@@ -42,6 +45,7 @@  CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
+CONFIG_BRCMFMAC=m
 CONFIG_CW1200=y
 CONFIG_CW1200_WLAN_SDIO=y
 CONFIG_INPUT_EVDEV=y
@@ -52,9 +56,11 @@  CONFIG_KEYBOARD_STMPE=y
 CONFIG_KEYBOARD_TC3589X=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_INPUT_GPIO_VIBRA=y
 CONFIG_RMI4_CORE=y
 CONFIG_RMI4_I2C=y
 CONFIG_RMI4_F11=y
@@ -62,7 +68,9 @@  CONFIG_RMI4_F11=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
+CONFIG_I2C_MUX=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
@@ -113,6 +121,7 @@  CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
 CONFIG_IIO_ST_ACCEL_3AXIS=y
 CONFIG_IIO_ST_GYRO_3AXIS=y
+CONFIG_INV_MPU6050_I2C=y
 CONFIG_BH1780=y
 CONFIG_AK8974=y
 CONFIG_IIO_ST_MAGN_3AXIS=y