diff mbox series

arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks

Message ID 20200106090030.9165-1-wens@kernel.org
State Mainlined
Commit b71818cbda252fc0ceb09939518376141f3b63ce
Headers show
Series arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks | expand

Commit Message

Chen-Yu Tsai Jan. 6, 2020, 9 a.m. UTC
From: Chen-Yu Tsai <wens@csie.org>

A few clocks from the CCU were exported later, and references to them in
the device tree were using raw numbers.

Now that the DT binding header changes are in as well, switch to the
macros for more clarity.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Maxime Ripard Jan. 6, 2020, 9:04 a.m. UTC | #1
On Mon, Jan 06, 2020 at 05:00:30PM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> A few clocks from the CCU were exported later, and references to them in
> the device tree were using raw numbers.
>
> Now that the DT binding header changes are in as well, switch to the
> macros for more clarity.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 92688b89c2a4..293059ffbbf6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -590,7 +590,7 @@  pio: pinctrl@1c20800 {
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 58>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -1091,7 +1091,7 @@  hdmi_phy: hdmi-phy@1ef0000 {
 			compatible = "allwinner,sun50i-a64-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu 7>;
+				 <&ccu CLK_PLL_VIDEO0>;
 			clock-names = "bus", "mod", "pll-0";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -1121,7 +1121,8 @@  r_intc: interrupt-controller@1f00c00 {
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;