diff mbox series

[v3] dt-bindings: usb: Convert DWC2 bindings to json-schema

Message ID 20200107091630.12796-1-benjamin.gaignard@st.com (mailing list archive)
State Mainlined
Commit f3ca745d8a0e6ace1f91bd122f5bff0323ff6bd8
Headers show
Series [v3] dt-bindings: usb: Convert DWC2 bindings to json-schema | expand

Commit Message

Benjamin GAIGNARD Jan. 7, 2020, 9:16 a.m. UTC
Convert DWC2 bindings to DT schema format using json-schema.
DWC2 is widely use but a couple of compatibles and properties
(vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the
patch add them.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
CC: Minas Harutyunyan <hminas@synopsys.com>
CC: Krzysztof Kozlowski <krzk@kernel.org>

changes in version 3:
- put Rob Herring as maintainer
- change the example to use one of the listed compatible

changes in version 2:
- put Minas Harutyunyan <hminas@synopsys.com> as maintainer
- remove type and description from phy property
- remove description from compatible items
- simplify samsung,s3c6400-hsotg compatible handling

 Documentation/devicetree/bindings/usb/dwc2.txt  |  64 ----------
 Documentation/devicetree/bindings/usb/dwc2.yaml | 151 ++++++++++++++++++++++++
 2 files changed, 151 insertions(+), 64 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/dwc2.txt
 create mode 100644 Documentation/devicetree/bindings/usb/dwc2.yaml

Comments

Rob Herring (Arm) Jan. 8, 2020, 8:49 p.m. UTC | #1
On Tue, 7 Jan 2020 10:16:30 +0100, Benjamin Gaignard wrote:
> Convert DWC2 bindings to DT schema format using json-schema.
> DWC2 is widely use but a couple of compatibles and properties
> (vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the
> patch add them.
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> CC: Minas Harutyunyan <hminas@synopsys.com>
> CC: Krzysztof Kozlowski <krzk@kernel.org>
> 
> changes in version 3:
> - put Rob Herring as maintainer
> - change the example to use one of the listed compatible
> 
> changes in version 2:
> - put Minas Harutyunyan <hminas@synopsys.com> as maintainer
> - remove type and description from phy property
> - remove description from compatible items
> - simplify samsung,s3c6400-hsotg compatible handling
> 
>  Documentation/devicetree/bindings/usb/dwc2.txt  |  64 ----------
>  Documentation/devicetree/bindings/usb/dwc2.yaml | 151 ++++++++++++++++++++++++
>  2 files changed, 151 insertions(+), 64 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/usb/dwc2.txt
>  create mode 100644 Documentation/devicetree/bindings/usb/dwc2.yaml
> 

Applied, thanks.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
deleted file mode 100644
index aafff3a6904d..000000000000
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ /dev/null
@@ -1,64 +0,0 @@ 
-Platform DesignWare HS OTG USB 2.0 controller
------------------------------------------------------
-
-Required properties:
-- compatible : One of:
-  - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
-  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
-  - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
-  - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
-  - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
-  - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
-  - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
-  - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
-  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
-  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
-  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
-  - "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs;
-  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
-  - snps,dwc2: A generic DWC2 USB controller with default parameters.
-  - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
-  configured in FS mode;
-  - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
-  configured in HS mode;
-  - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
-    configured in HS mode;
-- reg : Should contain 1 register range (address and length)
-- interrupts : Should contain 1 interrupt
-- clocks: clock provider specifier
-- clock-names: shall be "otg"
-Refer to clk/clock-bindings.txt for generic clock consumer properties
-
-Optional properties:
-- phys: phy provider specifier
-- phy-names: shall be "usb2-phy"
-- vbus-supply: reference to the VBUS regulator. Depending on the current mode
-  this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
-  regulator is updated if the controller is configured in "otg" mode and the
-  status changes between "host" and "peripheral".
-Refer to phy/phy-bindings.txt for generic phy consumer properties
-- dr_mode: shall be one of "host", "peripheral" and "otg"
-  Refer to usb/generic.txt
-- g-rx-fifo-size: size of rx fifo size in gadget mode.
-- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
-- snps,need-phy-for-wake: If present indicates that the phy needs to be left
-                          on for remote wakeup during suspend.
-- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
-                          we detect a wakeup.  This is due to a hardware errata.
-
-Deprecated properties:
-- g-use-dma: gadget DMA mode is automatically detected
-
-Example:
-
-        usb@101c0000 {
-                compatible = "ralink,rt3050-usb, snps,dwc2";
-                reg = <0x101c0000 40000>;
-                interrupts = <18>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		snps,need-phy-for-wake;
-        };
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
new file mode 100644
index 000000000000..71cf7ba32237
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -0,0 +1,151 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare HS OTG USB 2.0 controller Bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm2835-usb
+      - const: hisilicon,hi6220-usb
+      - items:
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,px30-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3036-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rv1108-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3188-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3228-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3288-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - const: lantiq,arx100-usb
+      - const: lantiq,xrx200-usb
+      - items:
+          - const: amlogic,meson8-usb
+          - const: snps,dwc2
+      - items:
+          - const: amlogic,meson8b-usb
+          - const: snps,dwc2
+      - const: amlogic,meson-gxbb-usb
+      - items:
+          - const: amlogic,meson-g12a-usb
+          - const: snps,dwc2
+      - const: amcc,dwc-otg
+      - const: snps,dwc2
+      - const: st,stm32f4x9-fsotg
+      - const: st,stm32f4x9-hsotg
+      - const: st,stm32f7-hsotg
+      - const: samsung,s3c6400-hsotg
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: otg
+
+  resets:
+    items:
+     - description: common reset
+     - description: ecc reset
+    minItems: 1
+
+  reset-names:
+    items:
+     - const: dwc2
+     - const: dwc2-ecc
+    minItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb2-phy
+
+  vbus-supply:
+    description: reference to the VBUS regulator. Depending on the current mode
+      this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
+      regulator is updated if the controller is configured in "otg" mode and the
+      status changes between "host" and "peripheral".
+
+  vusb_d-supply:
+    description: phandle to voltage regulator of digital section,
+
+  vusb_a-supply:
+    description: phandle to voltage regulator of analog section.
+
+  dr_mode:
+    enum: [host, peripheral, otg]
+
+  g-rx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size of rx fifo size in gadget mode.
+
+  g-np-tx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size of non-periodic tx fifo size in gadget mode.
+
+  g-tx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+  snps,need-phy-for-wake:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+
+  snps,reset-phy-on-wake:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If present indicates that we need to reset the PHY when we detect a wakeup.
+                 This is due to a hardware errata.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+      usb@101c0000 {
+        compatible = "rockchip,rk3066-usb", "snps,dwc2";
+        reg = <0x10180000 0x40000>;
+        interrupts = <18>;
+        clocks = <&usb_otg_ahb_clk>;
+        clock-names = "otg";
+        phys = <&usbphy>;
+        phy-names = "usb2-phy";
+      };
+
+...