mbox series

[GIT,PULL] i.MX fixes for 5.5, round 2

Message ID 20200110011836.GW4456@T480 (mailing list archive)
State Mainlined
Commit 89f33b984a51364465b32f8239eeb1daf62a6c03
Headers show
Series [GIT,PULL] i.MX fixes for 5.5, round 2 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.5-2

Message

Shawn Guo Jan. 10, 2020, 1:18 a.m. UTC
The following changes since commit 7947e3238b64c00c396e6f5738f94c4d653bc6a2:

  ARM: imx: Fix boot crash if ocotp is not found (2019-12-12 10:44:28 +0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.5-2

for you to fetch changes up to 4b0b97e651ecf29f20248420b52b6864fbd40bc2:

  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support (2020-01-09 19:21:53 +0800)

----------------------------------------------------------------
i.MX fixes for 5.5, round 2:

 - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0"
   error seen with UART1.
 - Correct compatible of RV3029 RTC device on imx6q-dhcom board.
 - Correct interrupt trigger type for magnetometer on board
   imx8mq-librem5-devkit.
 - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP
   development board.
 - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so
   that Ethernet interface on the board works properly.
 - Fix Toradex Colibri board to get NAND flash support back.
 - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which
   is connected to PMIC SW2 output rather than a fixed 3V3 rail.
 - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by
   kernel.
 - Fix endian setting for DCFG on LS1028A SoC, so that register access
   of DCFG becomes correct.

----------------------------------------------------------------
Adam Ford (1):
      arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm

Alexandre Belloni (1):
      ARM: dts: imx6q-dhcom: fix rtc compatible

Angus Ainslie (Purism) (1):
      arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer

Anson Huang (4):
      ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
      ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
      ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
      ARM: dts: imx6sll-evk: Remove incorrect power supply assignment

Jagan Teki (1):
      ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL

Marcel Ziswiler (1):
      ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support

Marek Vasut (1):
      ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection

Peng Fan (1):
      ARM: dts: imx7ulp: fix reg of cpu node

Yinbo Zhu (1):
      arm64: dts: ls1028a: fix endian setting for dcfg

 arch/arm/boot/dts/imx6dl-icore-mipi.dts                 | 2 +-
 arch/arm/boot/dts/imx6q-dhcom-pdk2.dts                  | 2 +-
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi                  | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi                  | 4 ----
 arch/arm/boot/dts/imx6sl-evk.dts                        | 4 ----
 arch/arm/boot/dts/imx6sll-evk.dts                       | 4 ----
 arch/arm/boot/dts/imx6sx-sdb-reva.dts                   | 4 ----
 arch/arm/boot/dts/imx6sx-sdb.dts                        | 4 ----
 arch/arm/boot/dts/imx7s-colibri.dtsi                    | 4 ++++
 arch/arm/boot/dts/imx7ulp.dtsi                          | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi          | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm.dtsi               | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
 13 files changed, 12 insertions(+), 28 deletions(-)