| Message ID | 20200116140108.6069-2-m.felsch@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/2] ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage | expand |
On Thu, Jan 16, 2020 at 03:01:08PM +0100, Marco Felsch wrote: > Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong. > The default module behaviour is to power VCCQ and VCC by the 3.3V power > rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc > power rail using a solder jumper. > > Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 51a47a242783..0e7f452dfb81 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -187,7 +187,6 @@ pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; - vmmc-supply = <&vdd_emmc_1p8>; status = "disabled"; };
Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong. The default module behaviour is to power VCCQ and VCC by the 3.3V power rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc power rail using a solder jumper. Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- v3: - adapt commit message v2: - remove all supplies references because per default the emmc is powered by the 3.3V power rail. - adapt commit message --- arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 1 - 1 file changed, 1 deletion(-)