Message ID | 20200118152459.17199-1-manu@FreeBSD.Org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] arm64: dts: allwinner: a64: Add gpio bank supply for A64-Olinuxino | expand |
Hi, On Sat, Jan 18, 2020 at 04:24:59PM +0100, Emmanuel Vadot wrote: > From: Emmanuel Vadot <manu@freebsd.org> > > Add the regulators for each bank on this boards. > For VCC-PL only add a comment on what regulator is used. We cannot add > the property without causing a circular dependency as the PL pins are > used to talk to the PMIC. > > Signed-off-by: Emmanuel Vadot <manu@freebsd.org> It seems that you sent it twice? I applied the second. It was not applying properly though, make sure to base your patches on next. Maxime
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 01a9a52edae4..7e71b5b12f98 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -163,6 +163,17 @@ &ohci1 { status = "okay"; }; +&pio { + vcc-pa-supply = <®_dcdc1>; + vcc-pb-supply = <®_dcdc1>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_aldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo4>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_rsb { status = "okay"; @@ -175,6 +186,12 @@ axp803: pmic@3a3 { }; }; +/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */ +/* interface used to talk to the PMIC in on the PL pins */ +/* &r_pio { */ +/* vcc-pl-supply = <®_aldo2>; */ +/* }; */ + #include "axp803.dtsi" &ac_power_supply {