@@ -663,4 +663,61 @@ pcie1_ep: pcie-ep@5600000 {
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 104 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 105 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 106 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
};
Add the nodes for McASP 0-2 and keep them disabled because several required properties are not present as they are board specific. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 57 ++++++++++++++++++++++++ 1 file changed, 57 insertions(+)