diff mbox series

[v3,3/3] clk: rockchip: convert rk3036 pll type to use internal lock status

Message ID 20200129163821.1547295-3-heiko@sntech.de (mailing list archive)
State Mainlined
Commit 7f6ffbb885d147557bdca471c37b7b1204005798
Headers show
Series [v3,1/3] clk: rockchip: convert rk3399 pll type to use readl_poll_timeout | expand

Commit Message

Heiko Stübner Jan. 29, 2020, 4:38 p.m. UTC
From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

The rk3036 pll type exposes its lock status in both its pllcon registers
as well as the General Register Files. To remove one dependency convert
it to the "internal" lock status, similar to how rk3399 handles it.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
changes in v3:
- switch to readl_relaxed_poll_timeout
changes in v2:
- use readl_poll_timeout instead of opencoding

 drivers/clk/rockchip/clk-pll.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

Comments

Stephen Boyd Jan. 30, 2020, 5:19 p.m. UTC | #1
Quoting Heiko Stuebner (2020-01-29 08:38:21)
> From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
> 
> The rk3036 pll type exposes its lock status in both its pllcon registers
> as well as the General Register Files. To remove one dependency convert
> it to the "internal" lock status, similar to how rk3399 handles it.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
> ---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
diff mbox series

Patch

diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index c7c3848d68e8..eccd9d49ee59 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -12,6 +12,7 @@ 
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
+#include <linux/iopoll.h>
 #include <linux/regmap.h>
 #include <linux/clk.h>
 #include "clk.h"
@@ -109,12 +110,31 @@  static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 #define RK3036_PLLCON1_REFDIV_SHIFT		0
 #define RK3036_PLLCON1_POSTDIV2_MASK		0x7
 #define RK3036_PLLCON1_POSTDIV2_SHIFT		6
+#define RK3036_PLLCON1_LOCK_STATUS		BIT(10)
 #define RK3036_PLLCON1_DSMPD_MASK		0x1
 #define RK3036_PLLCON1_DSMPD_SHIFT		12
+#define RK3036_PLLCON1_PWRDOWN			BIT(13)
 #define RK3036_PLLCON2_FRAC_MASK		0xffffff
 #define RK3036_PLLCON2_FRAC_SHIFT		0
 
-#define RK3036_PLLCON1_PWRDOWN			(1 << 13)
+static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
+{
+	u32 pllcon;
+	int ret;
+
+	/*
+	 * Lock time typical 250, max 500 input clock cycles @24MHz
+	 * So define a very safe maximum of 1000us, meaning 24000 cycles.
+	 */
+	ret = readl_relaxed_poll_timeout(pll->reg_base + RK3036_PLLCON(1),
+					 pllcon,
+					 pllcon & RK3036_PLLCON1_LOCK_STATUS,
+					 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
+
+	return ret;
+}
 
 static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
 					struct rockchip_pll_rate_table *rate)
@@ -212,7 +232,7 @@  static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
 	writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
 
 	/* wait for the pll to lock */
-	ret = rockchip_pll_wait_lock(pll);
+	ret = rockchip_rk3036_pll_wait_lock(pll);
 	if (ret) {
 		pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
 			__func__);
@@ -251,7 +271,7 @@  static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
 
 	writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
 	       pll->reg_base + RK3036_PLLCON(1));
-	rockchip_pll_wait_lock(pll);
+	rockchip_rk3036_pll_wait_lock(pll);
 
 	return 0;
 }