From patchwork Wed Jan 29 17:06:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin GAIGNARD X-Patchwork-Id: 11356599 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CEF1B14B7 for ; Wed, 29 Jan 2020 17:06:33 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id AB29A2071E for ; Wed, 29 Jan 2020 17:06:33 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="M21PpOKn"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=st.com header.i=@st.com header.b="mZscfpoT" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org AB29A2071E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=st.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-ID:Date:Subject:To :From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: List-Owner; bh=SwcGOE604K1WFfyZdg6h+UaPkCKiLo3NeUWwipZRM3U=; b=M21PpOKnDvkNPn xY0H+Ys0l03Vzs3wtq0L9m8EOgzLhytPZm5cSYRJOBaBXb0BEDOXYDyU/l1Vi83akC5mzs0rrLs+R Fq73VaAxsKtgDt7FyufqJlsSkm961FC0gcaaLp7JYo4gmF6xjrf6d1ChZP+1EH2wk2Bw70pmwoCWG XYOlVfiYi/iFiOA+bZo8+1eS4FQxfz0cf+hUuG1nzf9a2/y0QiRA42GGFZABG0N2fW7jn7MCOa9TG WWj4rnh1tc6ALVZM4oAav3pMSXgrbCpW9rpwgZv10bfhmIeQvm5Qd24T8kQ/05jm3jWmDyOa2Y/a/ b7UtdJLAPmmHA8j6GxcA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1iwqnO-0008LE-AP; Wed, 29 Jan 2020 17:06:30 +0000 Received: from mx08-00178001.pphosted.com ([91.207.212.93] helo=mx07-00178001.pphosted.com) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1iwqnK-0008Kh-Nn for linux-arm-kernel@lists.infradead.org; Wed, 29 Jan 2020 17:06:29 +0000 Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 00TGweMA008372; Wed, 29 Jan 2020 18:06:18 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : mime-version : content-type; s=STMicroelectronics; bh=qKe7KQ8mPrBzo9CA6IMu5Vx54UwaqqVmM3dUAMbQUSE=; b=mZscfpoTz15hk6L1jaIsPFG5U3AVcNUdDAcyIWgd6RQCioeTwvoqg2kKnlpNarPJ0ZtO Vx7YQFv4exVIJU6jNhCCG7H1ve+CnEGIvkgOLyxzV4ahQTelgMIzmGLT7GOBkl25zGhG DS6hrznj0XBH21X4rJFvXP5e6poQRWoCz2BC4SXJoibBTYWP5tdrGs3hafFUGtK9cjz4 FxREb7O+epc0LTzjglK/GClgHvDiUCA/XUQcoSwUgE56Gf3PnGSa6/CE0G4GmDx0lNQ5 iZYKJdRgC5Vw1uJni4SG7Lt2Y8CMsuDrLE5Q/vOM1TiuLbLZgs101M0COexZ9UJCu9W1 aQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2xrdekm92w-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 29 Jan 2020 18:06:17 +0100 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6EDCC10002A; Wed, 29 Jan 2020 18:06:16 +0100 (CET) Received: from Webmail-eu.st.com (sfhdag3node3.st.com [10.75.127.9]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 324B72C38CD; Wed, 29 Jan 2020 18:06:16 +0100 (CET) Received: from localhost (10.75.127.44) by SFHDAG3NODE3.st.com (10.75.127.9) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Wed, 29 Jan 2020 18:06:15 +0100 From: Benjamin Gaignard To: , , , , , Subject: [PATCH] dt-bindings: mfd: Convert stmfx bindings to json-schema Date: Wed, 29 Jan 2020 18:06:13 +0100 Message-ID: <20200129170613.14155-1-benjamin.gaignard@st.com> X-Mailer: git-send-email 2.15.0 MIME-Version: 1.0 X-Originating-IP: [10.75.127.44] X-ClientProxiedBy: SFHDAG7NODE1.st.com (10.75.127.19) To SFHDAG3NODE3.st.com (10.75.127.9) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.138, 18.0.572 definitions=2020-01-29_04:2020-01-28, 2020-01-29 signatures=0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200129_090627_146163_CC74B492 X-CRM114-Status: GOOD ( 19.27 ) X-Spam-Score: -0.9 (/) X-Spam-Report: SpamAssassin version 3.4.3 on bombadil.infradead.org summary: Content analysis details: (-0.9 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at https://www.dnswl.org/, low trust [91.207.212.93 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Benjamin Gaignard , linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Convert stmfx bindings to json-schema Signed-off-by: Benjamin Gaignard --- Documentation/devicetree/bindings/mfd/stmfx.txt | 28 ----- Documentation/devicetree/bindings/mfd/stmfx.yaml | 100 ++++++++++++++++++ .../devicetree/bindings/pinctrl/pinctrl-stmfx.txt | 116 --------------------- 3 files changed, 100 insertions(+), 144 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.yaml delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt deleted file mode 100644 index f0c2f7fcf5c7..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmfx.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectonics Multi-Function eXpander (STMFX) Core bindings - -ST Multi-Function eXpander (STMFX) is a slave controller using I2C for -communication with the main MCU. Its main features are GPIO expansion, main -MCU IDD measurement (IDD is the amount of current that flows through VDD) and -resistive touchscreen controller. - -Required properties: -- compatible: should be "st,stmfx-0300". -- reg: I2C slave address of the device. -- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. - Please refer to ../interrupt-controller/interrupt.txt - -Optional properties: -- drive-open-drain: configure MFX_IRQ_OUT as open drain. -- vdd-supply: phandle of the regulator supplying STMFX. - -Example: - - stmfx: stmfx@42 { - compatible = "st,stmfx-0300"; - reg = <0x42>; - interrupts = <8 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpioi>; - vdd-supply = <&v3v3>; - }; - -Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/mfd/stmfx.yaml b/Documentation/devicetree/bindings/mfd/stmfx.yaml new file mode 100644 index 000000000000..4219e0ffcb85 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmfx.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) bindings + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay + +allOf: + - $ref: ../pinctrl/pincfg-node.yaml + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: + maxItems: 1 + + stmfx-pin-controller: + type: object + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt deleted file mode 100644 index c1b4c1819b84..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt +++ /dev/null @@ -1,116 +0,0 @@ -STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings - -ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. -Please refer to ../mfd/stmfx.txt for STMFX Core bindings. - -Required properties: -- compatible: should be "st,stmfx-0300-pinctrl". -- #gpio-cells: should be <2>, the first cell is the GPIO number and the second - cell is the gpio flags in accordance with . -- gpio-controller: marks the device as a GPIO controller. -- #interrupt-cells: should be <2>, the first cell is the GPIO number and the - second cell is the interrupt flags in accordance with - . -- interrupt-controller: marks the device as an interrupt controller. -- gpio-ranges: specifies the mapping between gpio controller and pin - controller pins. Check "Concerning gpio-ranges property" below. -Please refer to ../gpio/gpio.txt. - -Please refer to pinctrl-bindings.txt for pin configuration. - -Required properties for pin configuration sub-nodes: -- pins: list of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes (pinconf-generic ones): -- bias-disable: disable any bias on the pin. -- bias-pull-up: the pin will be pulled up. -- bias-pull-pin-default: use the pin-default pull state. -- bias-pull-down: the pin will be pulled down. -- drive-open-drain: the pin will be driven with open drain. -- drive-push-pull: the pin will be driven actively high and low. -- output-high: the pin will be configured as an output driving high level. -- output-low: the pin will be configured as an output driving low level. - -Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are -called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". - -Concerning gpio-ranges property: -- if all STMFX pins[24:0] are available (no other STMFX function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; -- if agpio[3:0] are not available (STMFX Touchscreen function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; -- if agpio[7:4] are not available (STMFX IDD function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; - - -Example: - - stmfx: stmfx@42 { - ... - - stmfx_pinctrl: stmfx-pin-controller { - compatible = "st,stmfx-0300-pinctrl"; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - gpio-ranges = <&stmfx_pinctrl 0 0 24>; - - joystick_pins: joystick { - pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; - bias-pull-up; - }; - }; - }; - -Example of STMFX GPIO consumers: - - joystick { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&joystick_pins>; - pinctrl-names = "default"; - button-0 { - label = "JoySel"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - button-1 { - label = "JoyDown"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - }; - button-2 { - label = "JoyLeft"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <2 IRQ_TYPE_EDGE_RISING>; - }; - button-3 { - label = "JoyRight"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - button-4 { - label = "JoyUp"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - }; - }; - - leds { - compatible = "gpio-leds"; - orange { - gpios = <&stmfx_pinctrl 17 1>; - }; - - blue { - gpios = <&stmfx_pinctrl 19 1>; - }; - }